论文信息 - Simple first order all-pass section using a single CCII

Simple first order all-pass section using a single CCII

A novel first order all-pass section using a single second generation current conveyor is given. In addition the circuit uses two resistors and only one capacitor. The circuit is also realized with a translinear conveyor. The latter circuit uses only one external resistor and a capacitor. The proposed circuits are verified using PSPICE with attractive results.

I. A. Khan | S. Maheshwari

[1] Kirat Pal. Realization of current conveyor all-pass networks , 1981 .

[2] Yutaka Fukui,et al. Research note Realization of all-pass networks using a current conveyor , 1988 .

[3] B. Wilson,et al. Recent developments in current conveyors and current-mode circuits , 1990 .

[4] M. Higashimura,et al. Current-mode allpass filter using FTFN with grounded capacitor , 1991 .

[5] M. T. Ahmed,et al. A simple realisation scheme for OTA-C universal biquadratic filter , 1992 .

[6] J. A. Svoboda. Transfer function synthesis using current conveyors , 1994 .

[7] Yichuang Sun,et al. Versatile active biquad based on second-generation current conveyors , 1994 .

[8] Alain Fabre,et al. Current controlled bandpass filter based on translinear conveyors , 1995 .

[9] J. Horng. Novel universal voltage-mode biquad filter with three inputs and one output using only two current conveyors , 1996 .

[10] W. Kiranon,et al. Current controlled oscillator based on translinear conveyors , 1996 .

[11] Shen-Iuan Liu,et al. Voltage-mode universal filters using two current conveyors , 1997 .

[12] Ahmed M. Soliman,et al. Generation of current conveyor-based all-pass filters from op amp-based circuits , 1997 .

[13] C. A. Karybakas,et al. V-I SCALAR CIRCUITS BASED ON CCIIS , 1998 .