Microwave-assisted fluidized bed reactor pyrolysis of polypropylene plastic for pyrolysis gas production towards a sustainable development

[1]  Fang Hua,et al.  Simulating Polyethylene Pyrolysis from a Generalized Molecular-level Kinetic Model , 2023, Journal of Analytical and Applied Pyrolysis.

[2]  Q. Xiong,et al.  Prediction of instantaneous yield of bio-oil in fluidized biomass pyrolysis using long short-term memory network based on computational fluid dynamics data , 2023, Journal of Cleaner Production.

[3]  Fang Hua,et al.  Evolution of light olefins during the pyrolysis of polyethylene in a two-stage process , 2023, Journal of Analytical and Applied Pyrolysis.

[4]  F. Aubriet,et al.  Analysis and control of products obtained from pyrolysis of polypropylene using a reflux semi-batch reactor and GC-MS/FID and FT-ICR MS , 2023, Journal of Analytical and Applied Pyrolysis.

[5]  Paul Chen,et al.  Pyrolysis technology for plastic waste recycling: A state-of-the-art review , 2022, Progress in Energy and Combustion Science.

[6]  Fang Hua,et al.  A simplified and effective molecular-level kinetic model for plastic pyrolysis , 2022, Chemical Engineering Science.

[7]  Daniel C W Tsang,et al.  Tailoring wood waste biochar as a reusable microwave absorbent for pollutant removal: Structure-property-performance relationship and iron-carbon interaction. , 2022, Bioresource technology.

[8]  Ling Zhao,et al.  Recycling waste nickel-laden biochar to pseudo-capacitive material by hydrothermal treatment: roles of nickel-carbon interaction , 2022, Carbon Research.

[9]  Xiaoguang Duan,et al.  Structure-oriented conversions of plastics to carbon nanomaterials , 2022, Carbon Research.

[10]  C. Xu,et al.  Lignin derived carbon materials: current status and future trends , 2022, Carbon Research.

[11]  N. Khan,et al.  Plastic waste management via thermochemical conversion of plastics into fuel: a review , 2022, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[12]  J. Chaouki,et al.  Microwave-responsive SiC foam@zeolite core-shell structured catalyst for catalytic pyrolysis of plastics. , 2022, Environmental pollution.

[13]  Zaidoon M. Shakor,et al.  The yield of gasoline range hydrocarbons from plastic waste pyrolysis , 2022, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects.

[14]  M. F. A. Patah,et al.  A review of microwave pyrolysis as a sustainable plastic waste management technique. , 2021, Journal of environmental management.

[15]  Bingxi Li,et al.  Microwave-assisted pyrolysis of polystyrene for aviation oil production , 2022, Journal of Analytical and Applied Pyrolysis.

[16]  Jae Goo Lee,et al.  High temperature flash pyrolysis characteristics of waste plastics (SRF) in a bubbling fluidized bed: Effect of temperature and pelletizing , 2022, Fuel.

[17]  Nallapaneni Manoj Kumar,et al.  Sustainability-inspired upcycling of waste polyethylene terephthalate plastic into porous carbon for CO2 capture , 2022, Green Chemistry.

[18]  Guozhao Ji,et al.  Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste , 2021, ACS Sustainable Chemistry & Engineering.

[19]  C. Lindfors,et al.  Entrained Flow Gasification of Polypropylene Pyrolysis Oil , 2021, Molecules.

[20]  Y. Ok,et al.  The COVID-19 pandemic necessitates a shift to a plastic circular economy , 2021, Nature Reviews Earth & Environment.

[21]  T. Richards,et al.  Gaseous products from primary reactions of fast plastic pyrolysis , 2021 .

[22]  Dagmar R. D’hooge,et al.  The chemistry of chemical recycling of solid plastic waste via pyrolysis and gasification: State-of-the-art, challenges, and future directions , 2021 .

[23]  G. Nagababu,et al.  Optimization of microwave power and graphite susceptor quantity for waste polypropylene microwave pyrolysis , 2021 .

[24]  Jechan Lee,et al.  Pyrolysis of polypropylene for production of fuel‐range products: Effect of molecular weight of polypropylene , 2021, International Journal of Energy Research.

[25]  Jiachao Zhang,et al.  The effect of different particle sizes and HCl-modified kaolin on catalytic pyrolysis characteristics of reworked polypropylene plastics , 2020 .

[26]  Joseph D. Smith,et al.  Investigation of microwave-assisted transesterification reactor of waste cooking oil , 2020 .

[27]  B. Dyatkin,et al.  Microwave-assisted pressureless sintering of silicon-reinforced boron carbide composites , 2020 .

[28]  Z. Eller,et al.  Pyrolysis-gasification of wastes plastics for syngas production using metal modified zeolite catalysts under different ratio of nitrogen/oxygen , 2020 .

[29]  N. Borchard,et al.  Feedstock choice, pyrolysis temperature and type influence biochar characteristics: a comprehensive meta-data analysis review , 2020, Biochar.

[30]  Guozhao Ji,et al.  Liquid oils produced from pyrolysis of plastic wastes with heat carrier in rotary kiln , 2020 .

[31]  A. Tagliaferro,et al.  Electrical conductivity of wood biochar monoliths and its dependence on pyrolysis temperature , 2020, Biochar.

[32]  L. R. Miranda,et al.  Microwave pyrolysis of polystyrene and polypropylene mixtures using different activated carbon from biomass , 2020 .

[33]  Wang‐Sang Lee,et al.  Kilowatt-Level Power-Controlled Microwave Applicator With Multiple Slotted Waveguides for Improving Heating Uniformity , 2020, IEEE Transactions on Microwave Theory and Techniques.

[34]  K. Ro,et al.  Potential Use of Earthworms to Enhance Decaying of Biodegradable Plastics , 2020 .

[35]  Hui Jin,et al.  Experimental study on gasification performance of polypropylene (PP) plastics in supercritical water , 2020 .

[36]  S. Sakai,et al.  Gas and tar generation behavior during flash pyrolysis of wood pellet and plastic , 2020 .

[37]  Joo-Sik Kim,et al.  Activator-assisted pyrolysis of polypropylene , 2019, Applied Energy.

[38]  Paul T. Williams,et al.  Influence of catalyst bed temperature and properties of zeolite catalysts on pyrolysis-catalysis of a simulated mixed plastics sample for the production of upgraded fuels and chemicals , 2019, Journal of the Energy Institute.

[39]  Wei-hsin Chen,et al.  Pyrolysis characteristics and non-isothermal torrefaction kinetics of industrial solid wastes , 2019, Fuel.

[40]  K. Lee,et al.  Investigation of Indonesian low rank coals gasification in a fixed bed reactor with K2CO3 catalyst loading , 2019, Journal of the Energy Institute.

[41]  W. Lewandowski,et al.  Efficiency and proportions of waste tyre pyrolysis products depending on the reactor type—A review , 2019, Journal of Analytical and Applied Pyrolysis.

[42]  B. Ruj,et al.  Thermal degradation of waste plastics under non-sweeping atmosphere: Part 1: Effect of temperature, product optimization, and degradation mechanism. , 2019, Journal of environmental management.

[43]  S.-H. Ahn,et al.  Four‐kilowatt homogeneous microwave heating system using a power‐controlled phase‐shifting mode for improved heating uniformity , 2019, Electronics Letters.

[44]  P. Tiwari,et al.  The effect of slow pyrolysis on the conversion of packaging waste plastics (PE and PP) into fuel. , 2018, Waste management.

[45]  T. Yoshioka,et al.  Pyrolysis gases produced from individual and mixed PE, PP, PS, PVC, and PET—Part I: Production and physical properties , 2018, Fuel.

[46]  D. Shonnard,et al.  Effect of Temperature and Vapor Residence Time on the Micropyrolysis Products of Waste High Density Polyethylene , 2018 .

[47]  Shumin Fan,et al.  Potassium catalyst recovery process and performance evaluation of the recovered catalyst in the K2CO3-catalyzed steam gasification system , 2017 .

[48]  T. K. Nandi,et al.  Pre-treatment of rocks prior to comminution – A critical review of present practices , 2017 .

[49]  Shu-lin Chen,et al.  From plastics to jet fuel range alkanes via combined catalytic conversions , 2017 .

[50]  Biswajit Ruj,et al.  Time and temperature depended fuel gas generation from pyrolysis of real world municipal plastic waste , 2016 .

[51]  Clive Chong,et al.  Activated carbon derived from carbon residue from biomass gasification and its application for dye adsorption: Kinetics, isotherms and thermodynamic studies. , 2016, Bioresource technology.

[52]  R. Vinu,et al.  Resource recovery from synthetic polymers via microwave pyrolysis using different susceptors , 2015 .

[53]  P. Frediani,et al.  Efficient disposal of waste polyolefins through microwave assisted pyrolysis , 2014 .

[54]  Mohammad Reza Rahimpour,et al.  Investigation of ethylene production in naphtha thermal cracking plant in presence of steam and carbon dioxide , 2013 .

[55]  A Polettini,et al.  A review of dark fermentative hydrogen production from biodegradable municipal waste fractions. , 2013, Waste management.

[56]  S. Kingman,et al.  Continuous energy efficient exfoliation of vermiculite through microwave heating , 2012 .

[57]  Javier Bilbao,et al.  Production of Light Olefins from Polyethylene in a Two-Step Process: Pyrolysis in a Conical Spouted Bed and Downstream High-Temperature Thermal Cracking , 2012 .

[58]  Martin Olazar,et al.  Pilot scale conical spouted bed pyrolysis reactor: Draft tube selection and hydrodynamic performance , 2012 .

[59]  Ger Devlin,et al.  A review of recent laboratory research and commercial developments in fast pyrolysis and upgrading , 2011 .

[60]  G. Lopez,et al.  Product Yields and Compositions in the Continuous Pyrolysis of High-Density Polyethylene in a Conical Spouted Bed Reactor , 2011 .

[61]  Bo Xiao,et al.  Mechanism of wet sewage sludge pyrolysis in a tubular furnace , 2011 .

[62]  A. Marcilla,et al.  Effect of the temperature in the nature and extension of the primary and secondary reactions in the thermal and HZSM-5 catalytic pyrolysis of HDPE , 2007 .

[63]  S. Channiwala,et al.  A UNIFIED CORRELATION FOR ESTIMATING HHV OF SOLID, LIQUID AND GASEOUS FUELS , 2002 .

[64]  F. Berruti,et al.  Recycling of waste plastics by ultrapyrolysis using an internally circulating fluidized bed reactor , 1999 .

[65]  J. Kuipers,et al.  Experimental Determination of the Yield of Pyrolysis Products of Polyethene and Polypropene. Influence of Reaction Conditions , 1998 .