Power Conditioning for Energy Harvesting – Theoryand Architecture

[1]  A Carrella,et al.  Tuning a resonant energy harvester using a generalized electrical load , 2010 .

[2]  Steve G Burrow,et al.  Open-loop power conditioning for vibration energy harvesters , 2009 .

[3]  Michael J. Brennan,et al.  ON THE ORIGINS AND DEVELOPMENT OF MOBILITY AND IMPEDANCE METHODS IN STRUCTURAL DYNAMICS , 2002 .

[4]  P. D. Mitcheson,et al.  Power-Extraction Circuits for Piezoelectric Energy Harvesters in Miniature and Low-Power Applications , 2012, IEEE Transactions on Power Electronics.

[5]  Steve G Burrow,et al.  Half-wave rectifiers offer advantages for vibration energy harvesters , 2010 .

[6]  D. Guyomar,et al.  Toward energy harvesting using active materials and conversion improvement by nonlinear processing , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[7]  Andrew J. Fleming,et al.  Synthetic impedance for implementation of piezoelectric shunt-damping circuits , 2000 .

[8]  Dibin Zhu,et al.  A comparison of power output from linear and nonlinear kinetic energy harvesters using real vibration data , 2013 .

[9]  Paul D. Mitcheson,et al.  Coulomb-damped resonant generators using piezoelectric transduction , 2012 .

[10]  Yiannos Manoli,et al.  Efficient Energy Harvesting With Electromagnetic Energy Transducers Using Active Low-Voltage Rectification and Maximum Power Point Tracking , 2012, IEEE Journal of Solid-State Circuits.

[11]  Heath Hofmann,et al.  Adaptive piezoelectric energy harvesting circuit for wireless remote power supply , 2002 .

[12]  B. H. Stark,et al.  Review of Power Conditioning for Kinetic Energy Harvesting Systems , 2012, IEEE Transactions on Power Electronics.

[13]  B. H. Stark,et al.  Ultralow Power, Fully Autonomous Boost Rectifier for Electromagnetic Energy Harvesters , 2013, IEEE Transactions on Power Electronics.