Optimization of parameters for an aluminum melting furnace using the Taguchi approach

Abstract To achieve high thermal efficiency, less pollutant emission and high quality products, a study on a regenerative aluminum melting furnace was carried out. The effects of the vertical angle of burner ( A ), height of burner ( B ), secondary flue ( C ), swirl number ( D ), horizontal angle between burners ( E ), air preheated temperature ( F ), natural gas mass flow ( G ) and air-fuel ratio ( H ) on the performance of aluminum melting furnaces were investigated. RSD (relative standard deviation) of aluminum temperature ( Y 1), melting time ( Y 2) and RSD of furnace temperature ( Y 3) were designed for evaluation criteria. An orthogonal array was used to arrange CFD experimental plan for above factors. CFD technique, in association with the Taguchi method and cross-table-based analysis of variance were employed for parameter optimization of melting process of the aluminum melting furnace. The optimum condition which may be used to reduce energy consumption and pollutant emission is A 2 B 3 C 3 D 3 E 2 F 1 G 3 H 1. The obtained results were confirmed by statistical analysis method.

[1]  Genichi Taguchi,et al.  Taguchi's Quality Engineering Handbook , 2004 .

[2]  Chenn Q. Zhou,et al.  Combustion space modeling of an aluminum furnace , 2005 .

[3]  A. Roy Choudhury,et al.  The application of Taguchi’s method in the experimental investigation of the laser sintering process , 2008 .

[4]  Cafer Çelik,et al.  A Taguchi approach for investigation of some physical properties of concrete produced from mineral admixtures , 2008 .

[5]  Mecit Halil Oztop,et al.  Optimization of microwave frying of potato slices by using Taguchi technique , 2007 .

[6]  Hsin-Te Liao,et al.  Applications of Taguchi and design of experiments methods in optimization of chemical mechanical polishing process parameters , 2008 .

[7]  D. Salari,et al.  Employing the Taguchi method to obtain the optimum conditions of coagulation-flocculation process in tannery wastewater treatment , 2010 .

[8]  V. Balasubramanian,et al.  Process parameters optimization for friction stir welding of RDE-40 aluminium alloy using Taguchi technique , 2008 .

[9]  Fabrizio Dallari,et al.  Design of order picking system , 2009 .

[10]  Qiuwang Wang,et al.  Optimization of heat exchangers with vortex-generator fin by Taguchi method , 2010 .

[11]  Chenn Q. Zhou,et al.  Effect of Nitrogen and Oxygen Concentration on NOx Emissions in an Aluminum Furnace , 2006 .

[12]  B. Nageswara Rao,et al.  Taguchi's approach for reliability and safety assessments in the stage separation process of a multistage launch vehicle , 2009, Reliab. Eng. Syst. Saf..

[13]  Zahid A. Khan,et al.  Application of the Taguchi method for optimization of parameters to maximize text message entering performance of mobile phone users , 2009 .

[14]  Dyi-Cheng Chen,et al.  Design of brass alloy drawing process using Taguchi method , 2007 .

[15]  Julie Z. Zhang,et al.  Surface roughness optimization in an end-milling operation using the Taguchi design method , 2007 .

[16]  Martin Leary,et al.  Systematic design customization of sport wheelchairs using the taguchi method , 2010 .

[17]  Angela O. Nieckele,et al.  Numerical Modeling of an Industrial Aluminum Melting Furnace , 2004 .

[18]  Sushil Kumar,et al.  Optimization of green sand casting process parameters of a foundry by using Taguchi’s method , 2011 .