Low temperature bonding process for wafer-level MEMS packaging

In this paper, the development of low temperature (less than 300 C) bonding techniques of Si-to-glass, glass-to-glass and Si-to-Si is reported. To improve the bond quality of Si-to-glass and make glass-to-glass bonding viable, an amorphous silicon layer of 20-100 nm thickness is deposited as an intermediate layer. For Si-to-glass bonding, without applying the amorphous film, both the bond efficiency and bond strength are low. With the assistance of the amorphous film, the bond quality is significantly improved. Glass-to-glass bonding has also been successfully achieved at low temperature with the amorphous film as intermediate layer. Direct Si-to-Si bonding can be realized at a bonding temperature of 400 C with high bond strength and bond efficiency. Using a sol-gel intermediate layer, the bonding temperature can be reduced to less than 300 C. High bond strength is still maintained, while the bond efficiency is becoming a concern. The bonding mechanisms are proposed.

[1]  I. Hsing,et al.  Detailed characterization of anodic bonding process between glass and thin-film coated silicon substrates , 2000 .

[2]  Johannes G.E. Gardeniers,et al.  New applications of R.F.-sputtered glass films as protection and bonding layers in silicon micromachining , 1994 .

[3]  Si-to-Si wafer bonding using evaporated glass , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[4]  T. Rogers,et al.  Selection of glass, anodic bonding conditions and material compatibility for silicon-glass capacitive sensors , 1995 .

[5]  Byeong Kwon Ju,et al.  Anodic bonding technique under low temperature and low voltage using evaporated glass , 1997 .

[6]  M. Nese,et al.  Silicon-to-silicon anodic bonding with a borosilicate glass layer , 1991 .

[7]  S. Grigull,et al.  In situ investigation of ion drift processes in glass during anodic bonding , 1998 .

[8]  R. F. WoHenbuttel.  Low-temperature silicon wafer-to-wafer bonding using gold at eutectic temperature , 2001 .

[9]  U. Gösele,et al.  Low temperature wafer direct bonding , 1994 .

[10]  R. C. Frye,et al.  A Field‐Assisted Bonding Process for Silicon Dielectric Isolation , 1986 .

[11]  M. Nese,et al.  Anodic bonding of silicon to silicon wafers coated with aluminium, silicon oxide, polysilicon or silicon nitride , 1993 .

[12]  M. Schmidt.  Wafer-to-wafer bonding for microstructure formation , 1998, Proc. IEEE.

[13]  B. Puers,et al.  Characterization of the electrostatic bonding of silicon and Pyrex glass , 1995 .

[14]  G. Wallis,et al.  Field Assisted Glass‐Metal Sealing , 1969 .

[15]  K. Najafi,et al.  A hermetic glass-silicon package formed using localized aluminum/silicon-glass bonding , 2001 .

[16]  M. Esashi,et al.  Vacuum packaging for microsensors by glass-silicon anodic bonding , 1994 .

[17]  K. Wise,et al.  Low-temperature silicon wafer-to-wafer bonding using gold at eutectic temperature , 1994 .

[18]  Phillip W. Barth,et al.  Silicon fusion bonding for fabrication of sensors, actuators and microstructures , 1990 .

[19]  K. Najafi,et al.  A hermetic glass-silicon micropackage with high-density on-chip feedthroughs for sensors and actuators , 1996 .

[20]  Chengkuo Lee,et al.  Wafer bonding by low-temperature soldering , 2000 .

[21]  Peter Enoksson,et al.  Low-temperature wafer-level transfer bonding , 2001 .

[22]  C. Harendt,et al.  Silicon fusion bonding and its characterization , 1992 .

[23]  Shuichi Shoji,et al.  Low-temperature anodic bonding using lithium aluminosilicate-β-quartz glass ceramic , 1998 .

[24]  I. Hsing,et al.  An improved anodic bonding process using pulsed voltage technique , 2000, Journal of Microelectromechanical Systems.

[25]  Liwei Lin,et al.  Hermetic wafer bonding based on rapid thermal processing , 2001 .

[26]  J. Lasky.  Wafer bonding for silicon‐on‐insulator technologies , 1986 .

[27]  M. L. Nai,et al.  Low temperature wafer anodic bonding , 2003 .