Mechanism for perching on smooth surfaces using aerial impacts

One important issue of multirotor UAVs is their limited operational time due to their high power consumption. This issue may hinder the application of aerial robots for security purposes as their flight endurance can be exploited for just a finite amount of time, which is not necessarily sufficient in realistic surveillance scenarios. In order to achieve long endurance missions with multirotor UAVs, e.g. for crowd-surveillance, it can be beneficial to perch the UAV while it is operative to increase the operation time. This work presents an aerial manipulator that allows for reliable and reversible perching of multirotor UAVs on smooth vertical surfaces, using a lightweight mechanism based on passive vacuum-cup technology and the absorption of aerial impacts. This contributes towards enabling drones to become more flexible security systems for long endurance missions, as it allows them to position themselves passively in the environment. In this work, the design of the aerial perching mechanism is presented, as well as the perching strategy performed to achieve reliable perching. Experimental results demonstrate the relevant capabilities of the system for a drone weighing approximately 1.8 kg, including stable perching on the environment, disarming the rotors and reliable take-off.

[1]  Dario Floreano,et al.  Energy management for indoor hovering robots , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[2]  Vincenzo Lippiello,et al.  Hybrid Visual Servoing With Hierarchical Task Composition for Aerial Manipulation , 2016, IEEE Robotics and Automation Letters.

[3]  Giuseppe Loianno,et al.  Aggressive Flight With Quadrotors for Perching on Inclined Surfaces , 2016 .

[4]  Donald Ruffatto,et al.  Autonomous perching and take-off on vertical walls for a quadrotor micro air vehicle , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[5]  Stefano Stramigioli,et al.  Mechanical design of a manipulation system for unmanned aerial vehicles , 2012, 2012 IEEE International Conference on Robotics and Automation.

[6]  Heping Chen,et al.  Unified Switching between Active Flying and Perching of a Bioinspired Robot Using Impedance Control , 2015, J. Robotics.

[7]  Robert Horigan Smith Analyzing Friction in the Design of Rubber Products and Their Paired Surfaces , 2008 .

[8]  Stefano Stramigioli,et al.  Interaction control of an UAV endowed with a manipulator , 2013, 2013 IEEE International Conference on Robotics and Automation.

[9]  Christoph Hürzeler,et al.  A perching mechanism for micro aerial vehicles , 2009 .

[10]  Jindong Tan,et al.  A novel autonomous self-assembly distributed swarm flying robot , 2013 .

[11]  D F Hays,et al.  The physics of tire traction : theory and experiment , 1973 .

[12]  Daniel Mellinger,et al.  Control of Quadrotors for Robust Perching and Landing , 2010 .

[13]  Stefano Stramigioli,et al.  Compliant Aerial Manipulators: Toward a New Generation of Aerial Robotic Workers , 2016, IEEE Robotics and Automation Letters.

[14]  Koki Kikuchi,et al.  Development of a Small Legged Wall Climbing Robot with Passive Suction Cups , 2014 .

[15]  Lorenzo Marconi,et al.  Developing an Aerial Manipulator Prototype: Physical Interaction with the Environment , 2014, IEEE Robotics & Automation Magazine.

[16]  Dario Floreano,et al.  A perching mechanism for flying robots using a fibre-based adhesive , 2013, 2013 IEEE International Conference on Robotics and Automation.

[17]  Konstantin Kondak,et al.  First analysis and experiments in aerial manipulation using fully actuated redundant robot arm , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[18]  Vijay Kumar,et al.  Design, modeling, estimation and control for aerial grasping and manipulation , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[19]  Lorenzo Marconi,et al.  Modeling and control of a flying robot for contact inspection , 2012, 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems.