A review of power electronics interfaces for distributed energy systems towards achieving low-cost modular design

Due to increased attention towards clean and sustainable energy, distributed energy (DE) systems are gaining popularity all over the world. Power electronics are an integral part of these energy systems being able to convert generated electricity into consumer usable and utility compatible forms. But the addition of power electronics adds costs to the DE capital investments along with some reliability issues. Therefore, widespread use of distributed energy requires power electronics topologies that are less expensive and more dependable. Use of modular power electronics is a way to address these issues. Adoption of functional building blocks that can be used for multiple applications results in high volume production and reduced engineering effort, design testing, onsite installation and maintenance work for specific customer applications. In this paper, different power electronics topologies are reviewed that are typically used with distributed energy systems. The integrated power electronics module (IPEM) based back-to-back converter topologies are found to be most suitable interface that can operate with different DE systems with small or no modifications. Also the requirements for a hierarchical control structure with standardized power and communication interfaces are addressed in the paper along with some discussion on future design possibilities for the IPEM-based power electronics topologies. It is expected that modular and flexible power electronics and standardized controls and interfaces, will provide commonality in hardware and software for the power electronics interfaces, thus will enable their volume production and decrease their cost share in distributed energy applications.

[1]  Felix A. Farret,et al.  Renewable Energy Systems: Design and Analysis with Induction Generators , 2004 .

[2]  Felix A. Farret,et al.  Integration of alternative sources of energy , 2006 .

[3]  D. Sutanto,et al.  Exploring the power conditioning system for fuel cell , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[4]  Rui Zhou,et al.  Reliable, Low-Cost Distributed Generator/Utility System Interconnect: Final Subcontract Report, November 2001-March 2004 , 2006 .

[5]  Benjamin Kroposki,et al.  Advanced Power Electronic Interfaces for Distributed Energy Systems Part 1: Systems and Topologies , 2008 .

[6]  T. Oka,et al.  New stand-alone power generating system using wound-rotor induction machine , 2001, 4th IEEE International Conference on Power Electronics and Drive Systems. IEEE PEDS 2001 - Indonesia. Proceedings (Cat. No.01TH8594).

[7]  B. Ozpineci,et al.  MICROTURBINE POWER CONVERSION TECHNOLOGY REVIEW , 2003 .

[8]  F. Blaabjerg,et al.  Power electronics as efficient interface in dispersed power generation systems , 2004, IEEE Transactions on Power Electronics.

[9]  Jan T. Bialasiewicz,et al.  Power-Electronic Systems for the Grid Integration of Renewable Energy Sources: A Survey , 2006, IEEE Transactions on Industrial Electronics.

[10]  Xuhui Wen,et al.  Fuel cell power system and high power DC-DC converter , 2004 .

[11]  H. Nikkhajoei,et al.  A matrix converter based micro-turbine distributed generation system , 2005, IEEE Transactions on Power Delivery.

[12]  Tore Undeland,et al.  Power Electronics: Converters, Applications and Design , 1989 .

[13]  Y. Khersonsky,et al.  PEBB modules in distributed generation applications , 2003, 2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491).

[14]  Hui Li,et al.  A natural ZVS medium-power bidirectional DC-DC converter with minimum number of devices , 2001 .

[15]  F. Blaabjerg,et al.  A review of single-phase grid-connected inverters for photovoltaic modules , 2005, IEEE Transactions on Industry Applications.

[16]  Jinghong Guo,et al.  Distributed software architecture of PEBB-based plug and play power electronics systems , 2001, APEC 2001. Sixteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.01CH37181).

[17]  H. Akagi,et al.  A Bidirectional Isolated DC–DC Converter as a Core Circuit of the Next-Generation Medium-Voltage Power Conversion System , 2007, IEEE Transactions on Power Electronics.

[18]  D. Sutanto,et al.  Using battery energy storage system in a deregulated environment to improve power system performance , 2000, DRPT2000. International Conference on Electric Utility Deregulation and Restructuring and Power Technologies. Proceedings (Cat. No.00EX382).

[19]  N. Al-Khayat,et al.  Stand alone adjustable speed power generating set , 2002, 10th International Conference on Harmonics and Quality of Power. Proceedings (Cat. No.02EX630).

[20]  M.L. Lazarewicz,et al.  Grid frequency regulation by recycling electrical energy in flywheels , 2004, IEEE Power Engineering Society General Meeting, 2004..

[21]  B. Kroposki,et al.  Advanced Power Electronics Interfaces for Distributed Energy Workshop Summary: August 24, 2006, Sacramento, California , 2006 .

[22]  Dushan Boroyevich,et al.  A new control architecture for future distributed power electronics systems , 2000, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018).

[23]  N. G. Hingorani.  Power electronics building block concepts , 2003, 2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491).

[24]  D. Boroyevich,et al.  Control interface characterization of power electronics building blocks (PEBB) in utility power system applications , 2003, 2003 IEEE Power Engineering Society General Meeting (IEEE Cat. No.03CH37491).