Development and validation of patient-specific finite element models of the hemipelvis generated from a sparse CT data set.
暂无分享,去创建一个
Peter J Hunter | Iain A Anderson | Vickie B Shim | Rocco P Pitto | Robert M Streicher | P. Hunter | I. Anderson | R. Streicher | V. Shim | R. Pitto
[1] P Zioupos,et al. Effect of formaldehyde fixation on some mechanical properties of bovine bone. , 1995, Biomaterials.
[2] C. Chadwick,et al. The use of the Internet by orthopaedic outpatients. , 2001, The Journal of bone and joint surgery. British volume.
[3] N. Palastanga,et al. Anatomy and Human Movement: Structure and Function , 1989 .
[4] B. Augereau,et al. Experimental study of periacetabular deformations before and after implantation of hip prostheses. , 1996, Journal of biomechanics.
[5] Peter J Hunter,et al. The use of sparse CT datasets for auto-generating accurate FE models of the femur and pelvis. , 2007, Journal of biomechanics.
[6] F. G. Evans,et al. The mechanical properties of bone. , 1969, Artificial limbs.
[7] J. Lotz,et al. Impact biomechanics and pelvic deformation during insertion of press-fit acetabular cups. , 2002, The Journal of arthroplasty.
[8] R. Huiskes,et al. Load transfer across the pelvic bone. , 1995, Journal of biomechanics.
[9] P J Hunter,et al. An anatomically based patient-specific finite element model of patella articulation: towards a diagnostic tool , 2005, Biomechanics and modeling in mechanobiology.
[10] T D Brown,et al. A contact-coupled finite element analysis of the natural adult hip. , 1984, Journal of biomechanics.
[11] Marco Viceconti,et al. An improved method for the automatic mapping of computed tomography numbers onto finite element models. , 2004, Medical engineering & physics.
[12] J. Weiss,et al. Subject-specific finite element model of the pelvis: development, validation and sensitivity studies. , 2005, Journal of biomechanical engineering.
[13] J B Finlay,et al. Pelvic stresses in vitro--I. Malsizing of endoprostheses. , 1986, Journal of biomechanics.
[14] H B Skinner,et al. Correlation of Computed Finite Element Stresses to Bone Density After Remodeling Around Cementless Femoral Implants , 1994, Clinical orthopaedics and related research.
[15] R I Price,et al. Formalin fixation effects on vertebral bone density and failure mechanics: an in-vitro study of human and sheep vertebrae. , 1994, Clinical biomechanics.
[16] J. Pugh,et al. Cortical pelvic strains with varying size hemiarthroplasty in vitro. , 1989, Journal of biomechanics.
[17] E. Schneider,et al. The effect of interfacial parameters on cup-bone relative micromotions. A finite element investigation. , 2001, Journal of biomechanics.
[18] H. Hirschfelder,et al. A computed tomography assessment of femoral and acetabular bone changes after total hip arthroplasty , 2002, International Orthopaedics.
[19] P. Hunter,et al. Ventricular mechanics in diastole: material parameter sensitivity. , 2003, Journal of biomechanics.
[20] Peter Wriggers,et al. Computational Contact Mechanics , 2002 .
[21] Angelo Cappello,et al. Automatic generation of accurate subject-specific bone finite element models to be used in clinical studies. , 2004, Journal of biomechanics.
[22] T D Brown,et al. In vitro contact stress distributions in the natural human hip. , 1983, Journal of biomechanics.
[23] P. Pellicci,et al. Bone Density Adjacent to Press-Fit Acetabular Components: A Prospective Analysis with Quantitative Computed Tomography , 2001, The Journal of bone and joint surgery. American volume.
[24] D R Carter,et al. Stress distributions in the acetabular region--I. Before and after total joint replacement. , 1982, Journal of biomechanics.
[25] D R Pedersen,et al. An axisymmetric model of acetabular components in total hip arthroplasty. , 1982, Journal of biomechanics.
[26] H Oonishi,et al. Mechanical analysis of the human pelvis and its application to the artificial hip joint--by means of the three dimensional finite element method. , 1983, Journal of biomechanics.
[27] P. Hunter,et al. Integration from proteins to organs: the Physiome Project , 2003, Nature Reviews Molecular Cell Biology.
[28] R. Huiskes,et al. Development and validation of a three-dimensional finite element model of the pelvic bone. , 1995, Journal of biomechanical engineering.
[29] Justin W. Fernandez,et al. Anatomically based geometric modelling of the musculo-skeletal system and other organs , 2004, Biomechanics and modeling in mechanobiology.
[30] C. Dietschi,et al. Mechanical function of subchondral bone as experimentally determined on the acetabulum of the human pelvis. , 1976, Journal of biomechanics.
[31] M. Raimondi,et al. Loss in mechanical contact of cementless acetabular prostheses due to post-operative weight bearing: a biomechanical model. , 2007, Medical engineering & physics.
[32] E. F. Byars,et al. EFFECT OF EMBALMING ON THE MECHANICAL PROPERTIES OF BEEF BONE. , 1964, Journal of applied physiology.
[33] R. Huiskes,et al. Mechanical and textural properties of pelvic trabecular bone. , 1993, Journal of biomechanics.
[34] N. Sharkey,et al. Modified Transverse Locking Nail Fixation of Proximal Femoral Fractures , 1997, Clinical orthopaedics and related research.
[35] N L Svensson,et al. Stresses in the normal pelvis. , 1978, Computers in biology and medicine.
[36] D. J. Rapperport,et al. Contact finite element stress analysis of porous ingrowth acetabular cup implantation, ingrowth, and loosening , 1987, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[37] Luis Gracia,et al. Long-term study of bone remodelling after femoral stem: a comparison between dexa and finite element simulation. , 2007, Journal of biomechanics.
[38] M. Viceconti,et al. The material mapping strategy influences the accuracy of CT-based finite element models of bones: an evaluation against experimental measurements. , 2007, Medical engineering & physics.
[39] J Fisher,et al. The Influence of Loading Time and Lubricant on the Friction of Articular Cartilage , 1996, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.
[40] L. E. Malvern. Introduction to the mechanics of a continuous medium , 1969 .
[41] R. Landsberg,et al. Pelvic stresses in vitro--II. A study of the efficacy of metal-backed acetabular prostheses. , 1986, Journal of biomechanics.
[42] J. Alonso,et al. Contact pressures in the flexed hip joint during lateral trochanteric loading , 2005, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[43] A S Greenwald,et al. The transmission of load through the human hip joint. , 1971, Journal of biomechanics.
[44] Marco Viceconti,et al. Subject-specific finite element models of long bones: An in vitro evaluation of the overall accuracy. , 2006, Journal of biomechanics.
[45] G. Bergmann,et al. Interfacial conditions between a press-fit acetabular cup and bone during daily activities: implications for achieving bone in-growth. , 2000, Journal of Biomechanics.
[46] K. Bathe. Finite Element Procedures , 1995 .
[47] Jan Schmitt,et al. Femoral strain changes after total hip arthroplasty--patient-specific finite element analyses 12 years after operation. , 2005, Medical engineering & physics.
[48] D. J. Rapperport,et al. Contact finite element stress analysis of the hip joint , 1985, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[49] D R Carter,et al. Stress distributions in the acetabular region--II. Effects of cement thickness and metal backing of the total hip acetabular component. , 1982, Journal of biomechanics.
[50] T. Santner,et al. Acetabular cup geometry and bone-implant interference have more influence on initial periprosthetic joint space than joint loading and surgical cup insertion. , 2006, Journal of Biomechanical Engineering.
[51] P S Walker,et al. Effects of prosthetic acetabular replacement on strains in the pelvis , 1985, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[52] W R Walsh,et al. Computational bone remodelling simulations and comparisons with DEXA results , 2005, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[53] D. Hungerford,et al. The initial stability of uncemented acetabular components. , 1992, The Journal of bone and joint surgery. British volume.