Physicomechanical, friction, and abrasion properties of EVA/PU blend foams foamed by supercritical nitrogen

Elastomer foams based on EVA, PU, and EVA/PU blends formulated for shoe-sole applications were prepared by a supercritical N2 batch foaming process and characterized for physicomechanical, friction and abrasion properties. The blending of EVA with PU was aimed for improving the friction and wear characteristics of the EVA based foams. All of the foams prepared showed spherical cells with closed-cell morphology and the cell sizes varied with varying the EVA/PU blend ratio and CaCO3 content of the foams. The properties such as hardness and resilience, friction coefficients and abrasion resistance improved for the EVA/PU blend foams compared to the EVA foam, but their compression set, tensile strength, and tear strength were inferior to the EVA foam. The incorporation of CaCO3 filler increased density, hardness, tensile strength, and tear strength of the EVA/PU blend foams but decreased resilience, compression set, friction coefficients, and abrasion resistance. The improvement in friction coefficients and wear resistance obtained in the EVA/PU blend foams was significant for shoe-sole applications. POLYM. ENG. SCI., 2017. © 2017 Society of Plastics Engineers

[1]  J. Fages,et al.  Extrusion assisted by supercritical CO2 : a review on its application to biopolymers , 2017 .

[2]  Shota Ishihara,et al.  A new microcellular foam injection-molding technology using non-supercritical fluid physical blowing agents , 2017 .

[3]  P. Mertiny,et al.  Evaluation of the effect of temperature on mechanical properties and wear resistance of polyurethane elastomers , 2016 .

[4]  In-Ju Kim.  Identifying shoe wear mechanisms and associated tribological characteristics: Importance for slip resistance evaluation , 2016 .

[5]  M. L. Maspoch,et al.  Effect of microcellular foaming on the fracture behavior of ABS polymer , 2016 .

[6]  V. Altstädt,et al.  Microcellular to nanocellular polymer foams : Progress(2004–2015) and future directions ; A review , 2015 .

[7]  Kishore,et al.  Dry sliding wear of epoxy/cenosphere syntactic foams , 2015 .

[8]  G. Vancso,et al.  Nanocellular polymer foams as promising high performance thermal insulation materials , 2015 .

[9]  B. Swoboda,et al.  Polymer nano-foams for insulating applications prepared from CO2 foaming , 2015 .

[10]  Chul B. Park,et al.  Poly (lactic acid) foaming , 2014 .

[11]  Zhongyuan Lu,et al.  Preparation of silicone rubber foam using supercritical carbon dioxide , 2014 .

[12]  J. Velasco,et al.  Multifunctional polymer foams with carbon nanoparticles , 2014 .

[13]  Chul B. Park,et al.  The Orientation of Carbon Nanotubes in Poly(ethylene-co-octene) Microcellular Foaming, and Its Suppression Effect on Cell Coalescence , 2012 .

[14]  T. K. Chaki,et al.  Microcellular Foam from Ethylene Vinyl Acetate/Polybutadiene Rubber (EVA/BR) Based Thermoplastic Elastomers for Footwear Applications , 2012 .

[15]  T. Ishikawa,et al.  Visual observation and numerical studies of N2 vs. CO2 foaming behavior in core‐back foam injection molding , 2012 .

[16]  N. Chand,et al.  Influence of foaming agent on wear and mechanical properties of surface modified rice husk filled polyvinylchloride , 2012 .

[17]  W. Michaeli,et al.  Extrusion of physically foamed rubber profiles , 2011 .

[18]  Martial Sauceau,et al.  New challenges in polymer foaming: A review of extrusion processes assisted by supercritical carbon dioxide , 2011 .

[19]  L. J. Lee,et al.  Extrusion foaming of polystyrene/carbon particles using carbon dioxide and water as co-blowing agents , 2011 .

[20]  C. S. Sipaut,et al.  Correlation between the acoustic and dynamic mechanical properties of natural rubber foam: Effect of foaming temperature , 2011 .

[21]  Chul B. Park,et al.  Enhancing cell nucleation of thermoplastic polyolefin foam blown with nitrogen , 2010 .

[22]  M. H. N. Famili,et al.  Investigation of a strategy for well controlled inducement of microcellular and nanocellular morphologies in polymers , 2010 .

[23]  Jin Kuk Kim,et al.  Effect of carbon black content on microcellular structure and physical properties of chlorinated polyethylene rubber foams , 2010 .

[24]  L. Schadler,et al.  The influence of carbon nanotube aspect ratio on the foam morphology of MWNT/PMMA nanocomposite foams , 2010 .

[25]  L. Schadler,et al.  Influence of nanoparticle surface chemistry and size on supercritical carbon dioxide processed nanocomposite foam morphology , 2010 .

[26]  Chul B. Park,et al.  Solubility measurements of N2 and CO2 in polypropylene and ethene/octene copolymer , 2007 .

[27]  Chul B. Park,et al.  Use of Nitrogen as a Blowing Agent for the Production of Fine-Celled High-Density Polyethylene Foams† , 2006 .

[28]  S. Kim,et al.  Foamability of Thermoplastic Vulcanizates (TPVs) with Carbon Dioxide and Nitrogen , 2006 .

[29]  L. Nicolais,et al.  Structure optimization of polycaprolactone foams by using mixtures of CO2 and N2 as blowing agents , 2005 .

[30]  Min-Su Kim,et al.  Physical properties of ethylene vinyl acetate copolymer (EVA)/natural rubber (NR) blend based foam , 2004 .

[31]  L. J. Lee,et al.  Extrusion of polystyrene nanocomposite foams with supercritical CO2 , 2003 .

[32]  Sumarno,et al.  Solubilities and diffusion coefficients of carbon dioxide and nitrogen in polypropylene, high-density polyethylene, and polystyrene under high pressures and temperatures , 1999 .

[33]  Carla Jones,et al.  The Surface Roughness of a Rubber Soling Material Determines the Coefficient of Friction on Water-Lubricated Surfaces , 1998 .

[34]  Chul B. Park,et al.  Processing and characterization of microcellular foamed high-density polythylene/isotactic polypropylene blends , 1998 .

[35]  Chul B. Park,et al.  The effect of talc on cell nucleation in extrusion foam processing of polypropylene with CO2 and isopentane , 1998 .

[36]  Chul B. Park,et al.  Effect of the crystallinity and morphology on the microcellular foam structure of semicrystalline polymers , 1996 .

[37]  E. Beckman,et al.  Generation of microcellular polymeric foams using supercritical carbon dioxide. II: Cell growth and skin formation , 1994 .

[38]  E. Beckman,et al.  Generation of microcellular polymeric foams using supercritical carbon dioxide. I: Effect of pressure and temperature on nucleation , 1994 .

[39]  A.M. Henderson,et al.  Ethylene-vinyl acetate (EVA) copolymers: a general review , 1993, IEEE Electrical Insulation Magazine.

[40]  N. Suh,et al.  A process for making microcellular thermoplastic parts , 1990 .

[41]  M. P. Wilson,et al.  Slip resistance testing of shoes — new developments , 1983 .