Development of a Laser Scanner-based Navigation System for a Combine Harvester

Abstract The objective of this study was to develop an autonomous navigation system for a combine harvester using a laser scanner. The laser scanner was attached to the top of the harvester cabin through a pan tilt unit that tilted the laser scanner in the vertical plane to obtain 3D information on the field. A field profile was modeled by investigating the spatial distribution of range data measured by the laser scanner in a soybean field. A crop row localization method used a cross correlation algorithm to calculate the relative position and direction between the vehicle and crop rows. Field experiments were conducted in a row-planted soybean field during harvesting season. Results showed that the combine harvester had RMS errors of 0.02 m and 0.8 degrees in terms of lateral offset and heading deflection, respectively, in detecting the soybean row localized between cut and uncut areas under static conditions. The corresponding RMS errors were 0.07 m and 3 degrees when the combine harvester was autonomously guided to perform soybean harvesting along crop rows at a speed of 0.97 m/s in the field.

[1]  Thierry Chateau,et al.  Automatic guidance of agricultural vehicles using a laser sensor. , 2000 .

[2]  José Luis Pons Rovira,et al.  Automatic fruit recognition: a survey and new results using Range/Attenuation images , 1999, Pattern Recognit..

[3]  Thomas Bell.  Automatic tractor guidance using carrier-phase differential GPS. , 2000 .

[4]  Kazunobu Ishii,et al.  Field Automation Using Robot Tractor , 2002 .

[5]  Vijay Subramanian,et al.  Development of machine vision and laser radar based autonomous vehicle guidance systems for citrus grove navigation , 2006 .

[6]  Noboru Noguchi,et al.  Robotization of agricultural vehicles (Part 2). Description of the tilling robot. , 2000 .

[7]  Noboru Noguchi,et al.  An obstacle identification algorithm for a laser range finder-based obstacle detector , 2005 .

[8]  Noboru Noguchi,et al.  Agricultural automatic guidance research in North America , 2000 .

[9]  Kazunobu Ishii,et al.  Development of an Autonomous Navigation System using a Two-dimensional Laser Scanner in an Orchard Application , 2007 .

[10]  Qin Zhang,et al.  A Stereovision-based Crop Row Detection Method for Tractor-automated Guidance , 2005 .

[11]  John F. Reid,et al.  An Algorithm for Computer Vision Sensing of a Row Crop Guidance Directrix , 1991 .

[12]  Yoshisada Nagasaka,et al.  Autonomous guidance for rice transplanting using global positioning and gyroscopes , 2004 .

[13]  N. D. Tillett,et al.  Automatic guidance sensors for agricultural field machines:A review , 1991 .