Operating Highly Stable LiCoO2 Cathodes up to 4.6 V by Using an Effective Integration of Surface Engineering and Electrolyte Solutions Selection

The need for high power density cathodes for Li‐ion batteries can be fulfilled by application of a high charging voltage above 4.5 V. As lithium cobalt oxide (LCO) remains a dominant commercial cathode material, tremendous efforts are invested to increase its charging potential toward 4.6 V. Yet, the long‐term performance of high voltage LCO cathodes still remains poor. Here, an integrated approach combining the application of an aluminum fluoride coating and the use of electrolyte solutions comprising 1:1:8 mixtures of difluoroethylene:fluoroethylene carbonate:dimethyl carbonate and 1 m LiPF6 is reported. This results in superior behavior of LCO cathodes charged at 4.6 V with high initial capacity of 223 mAh g−1, excellent long‐term performance, and 78% capacity retention after 500 cycles. Impressive stability is also found at 450 °C with an initial capacity of 220 mAh g−1 and around 84% capacity retention after 100 cycles. Systematic post‐mortem analysis of LCO cathodes and Li anodes after prolonged cycling reveals two main degradation routes related to changes at the surface of the cathodes and formation of passivation layers on the anodes. This study demonstrates the importance of appropriate selection of electrolyte solutions and development of effective coatings for improved performance of high voltage LCO‐based Li batteries.

[1]  D. Aurbach,et al.  High Energy Density Rechargeable Batteries Based on Li Metal Anodes. The Role of Unique Surface Chemistry Developed in Solutions Containing Fluorinated Organic Co-solvents. , 2021, Journal of the American Chemical Society.

[2]  Yong Yang,et al.  Stabilizing the LiCoO2 Interface at High Voltage with an Electrolyte Additive 2,4,6-Tris(4-fluorophenyl)boroxin , 2021, ACS Sustainable Chemistry & Engineering.

[3]  D. Aurbach,et al.  Unraveling the Role of Fluorinated Alkyl Carbonate Additives in Improving Cathode Performance in Sodium-Ion Batteries. , 2021, ACS applied materials & interfaces.

[4]  Jin‐Yi Li,et al.  trans-Difluoroethylene Carbonate as an Electrolyte Additive for Microsized SiOx@C Anodes. , 2021, ACS applied materials & interfaces.

[5]  Lan Xia,et al.  Review—recent advances in non-aqueous liquid electrolytes containing fluorinated compounds for high energy density lithium-ion batteries , 2021, Energy Storage Materials.

[6]  Zhixing Wang,et al.  Evolution of the morphology, structural and thermal stability of LiCoO2 during overcharge , 2021 .

[7]  Kang Xu,et al.  Structural origin of the high-voltage instability of lithium cobalt oxide , 2021, Nature Nanotechnology.

[8]  Yong Yang,et al.  Research progress of fluorine-containing electrolyte additives for lithium ion batteries , 2021 .

[9]  M. Winter,et al.  Understanding the Outstanding High‐Voltage Performance of NCM523||Graphite Lithium Ion Cells after Elimination of Ethylene Carbonate Solvent from Conventional Electrolyte , 2021, Advanced Energy Materials.

[10]  Alexander W. Abboud,et al.  Fast Diagnosis of Failure Mechanisms and Lifetime Prediction of Li Metal Batteries. , 2020, Small methods.

[11]  E. Michel,et al.  A multi-technique approach to understanding delithiation damage in LiCoO2 thin films , 2021, Scientific Reports.

[12]  P. Yan,et al.  Atomistic mechanism of cracking degradation at twin boundary of LiCoO2 , 2020 .

[13]  Hong Yang,et al.  Catalytic Performance for the Conversion of Potent Fluorinated Greenhouse Gases by Aluminium Fluorides with Different Morphology , 2020, Catalysis Letters.

[14]  Xiqian Yu,et al.  Hierarchical Defect Engineering for LiCoO2 through Low-Solubility Trace Element Doping , 2020, Chem.

[15]  D. Aurbach,et al.  Electrolyte Solutions for Rechargeable Li-Ion Batteries Based on Fluorinated Solvents , 2020 .

[16]  Bingkun Guo,et al.  An Overview on the Advances of LiCoO2 Cathodes for Lithium‐Ion Batteries , 2020, Advanced Energy Materials.

[17]  Yong Yang,et al.  Recent advances and historical developments of high voltage lithium cobalt oxide materials for rechargeable Li-ion batteries , 2020 .

[18]  Bingkun Guo,et al.  Study on the effect of Ni and Mn doping on the structural evolution of LiCoO2 under 4.6 V high-voltage cycling , 2020 .

[19]  D. Aurbach,et al.  Improved Performance of Li-metal∣LiNi0.8Co0.1Mn0.1O2 Cells with High-Loading Cathodes and Small Amounts of Electrolyte Solutions Containing Fluorinated Carbonates at 30 °C–55 °C , 2020, Journal of The Electrochemical Society.

[20]  Qiang Zhang,et al.  Fluorinated Solid-Electrolyte Interphase in High-Voltage Lithium Metal Batteries , 2019, Joule.

[21]  Tingzheng Hou,et al.  The influence of FEC on the solvation structure and reduction reaction of LiPF6/EC electrolytes and its implication for solid electrolyte interphase formation , 2019, Nano Energy.

[22]  Siyuan Li,et al.  Electrochemical surface passivation of LiCoO2 particles at ultrahigh voltage and its applications in lithium-based batteries , 2018, Nature Communications.

[23]  Bingkun Guo,et al.  Improved Electrochemical Performances of LiCoO2 at Elevated Voltage and Temperature with an In Situ Formed Spinel Coating Layer. , 2018, ACS applied materials & interfaces.

[24]  Shi-guo Xu,et al.  The Influence of Ni Doping on the Structure and Electrochemical Properties of LiCoO2 Materials , 2018 .

[25]  Kang Xu,et al.  Highly Fluorinated Interphases Enable High-Voltage Li-Metal Batteries , 2018 .

[26]  Doron Aurbach,et al.  Fluoroethylene Carbonate as an Important Component for the Formation of an Effective Solid Electrolyte Interphase on Anodes and Cathodes for Advanced Li-Ion Batteries , 2017 .

[27]  S. George,et al.  Coating Solution for High-Voltage Cathode: AlF3 Atomic Layer Deposition for Freestanding LiCoO2 Electrodes with High Energy Density and Excellent Flexibility. , 2017, ACS applied materials & interfaces.

[28]  Chong Yan,et al.  Fluoroethylene Carbonate Additives to Render Uniform Li Deposits in Lithium Metal Batteries , 2017 .

[29]  Hajime Arai,et al.  In situ NMR observation of the lithium extraction/insertion from LiCoO2 cathode , 2013 .

[30]  Takeshi Nakagawa,et al.  Thermal stability and kinetics of delithiated LiCoO2 , 2011 .

[31]  Yang-Kook Sun,et al.  Role of surface coating on cathode materials for lithium-ion batteries , 2010 .

[32]  I. Baraille,et al.  Surface Properties of LiCoO2 Investigated by XPS Analyses and Theoretical Calculations , 2009 .

[33]  Rémi Dedryvère,et al.  XPS Study on Al2O3- and AlPO4-Coated LiCoO2 Cathode Material for High-Capacity Li Ion Batteries , 2007 .

[34]  Ying Shirley Meng,et al.  Phase Transitions and High-Voltage Electrochemical Behavior of LiCoO2 Thin Films Grown by Pulsed Laser Deposition , 2007 .

[35]  Linda F. Nazar,et al.  Review on electrode–electrolyte solution interactions, related to cathode materials for Li-ion batteries , 2007 .

[36]  Seung‐Taek Myung,et al.  Role of Alumina Coating on Li−Ni−Co−Mn−O Particles as Positive Electrode Material for Lithium-Ion Batteries , 2005 .

[37]  Junwei Jiang,et al.  ARC studies of the thermal stability of three different cathode materials: LiCoO2; Li[Ni0.1Co0.8Mn0.1]O2; and LiFePO4, in LiPF6 and LiBoB EC/DEC electrolytes , 2004 .

[38]  Richard T. Haasch,et al.  Surface Characterization of Electrodes from High Power Lithium-Ion Batteries , 2002 .

[39]  Stephane Levasseur,et al.  The insulator-metal transition upon lithium deintercalation from LiCoO2: electronic properties and 7Li NMR study , 1999 .