Topology optimization design of cast parts based on virtual temperature method

Abstract Topology optimization has been widely used in industry for its powerful innovation ability to obtain the concept designs, which are generally unintuitive. But due to the limitation of the manufacturing processes or costs, some of these designs cannot be manufactured directly, so considering manufacturing process constraints in topology optimization becomes increasingly important. This paper presents a new method for structural topology optimization design considering the molding constraint which requires the absence of interior voids and undercuts in the cast parts. A virtual thermal diffusion problem is appropriately defined and a global thermal constraint is added into the optimization model to guarantee the cast-ability of the structural shape. The parting directions, unidirectional or multi-directional, are modeled by modifying heat dissipation boundaries and material properties. This method does not require an optimization process to start from a feasible initialization and can be applied to almost any topology optimization problems. Finite volume method is used to solve a steady-state heat equation and a parametric formulation of the conductive coefficient is given. Several examples of topology optimization of cast parts are provided to illustrate the validity and the effectiveness of the proposed method.

[1]  James K. Guest,et al.  Topology optimization with multiple phase projection , 2009 .

[2]  Liang Gao,et al.  A level set method for topological shape optimization of 3D structures with extrusion constraints , 2015 .

[3]  Xu Guo,et al.  An explicit length scale control approach in SIMP-based topology optimization , 2014 .

[4]  Grégoire Allaire,et al.  Molding Direction Constraints in Structural Optimization via a Level-Set Method , 2016 .

[5]  Yonghua Chen,et al.  Manufacturable mechanical part design with constrained topology optimization , 2012 .

[6]  Zhan Kang,et al.  Structural shape and topology optimization of cast parts using level set method , 2017 .

[7]  Ole Sigmund,et al.  Length scale and manufacturability in density-based topology optimization , 2016, Archive of Applied Mechanics.

[8]  Lothar Harzheim,et al.  A review of optimization of cast parts using topology optimization , 2005 .

[9]  Jihong Zhu,et al.  Topology Optimization in Aircraft and Aerospace Structures Design , 2016 .

[10]  Thomas A. Poulsen.  A new scheme for imposing a minimum length scale in topology optimization , 2003 .

[11]  M. Wang,et al.  Length scale control for structural optimization by level sets , 2016 .

[12]  Shutian Liu,et al.  Topology optimization-based lightweight primary mirror design of a large-aperture space telescope. , 2014, Applied optics.

[13]  Xu Guo,et al.  Explicit feature control in structural topology optimization via level set method , 2014 .

[14]  Rui Hu,et al.  H-DGTP—a Heaviside-function based directional growth topology parameterization for design optimization of stiffener layout and height of thin-walled structures , 2015 .

[15]  Takayuki Yamada,et al.  A topology optimization method based on the level set method incorporating a fictitious interface energy , 2010 .

[16]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .

[17]  Casper Schousboe Andreasen,et al.  An explicit parameterization for casting constraints in gradient driven topology optimization , 2011 .

[18]  Glaucio H. Paulino,et al.  Topology optimization with manufacturing constraints: A unified projection-based approach , 2016, Adv. Eng. Softw..

[19]  Ole Sigmund,et al.  On projection methods, convergence and robust formulations in topology optimization , 2011, Structural and Multidisciplinary Optimization.

[20]  O. Sigmund.  Morphology-based black and white filters for topology optimization , 2007 .

[21]  Jirí Matousek,et al.  Separating an object from its cast , 2002, Comput. Aided Des..

[22]  Shutian Liu,et al.  Structural topology optimization considering connectivity constraint , 2016, Structural and Multidisciplinary Optimization.

[23]  Zunyi Duan,et al.  Size effect of lattice material and minimum weight design , 2014 .

[24]  Z. Kang,et al.  An enhanced aggregation method for topology optimization with local stress constraints , 2013 .

[25]  Yi Min Xie,et al.  A further review of ESO type methods for topology optimization , 2010 .

[26]  M. Zhou,et al.  PROGRESS IN TOPOLOGY OPTIMIZATION WITH MANUFACTURING CONSTRAINTS , 2002 .

[27]  Wei Wu,et al.  Topology optimization of a novel stent platform with drug reservoirs. , 2008, Medical engineering & physics.

[28]  K. Svanberg.  The method of moving asymptotes—a new method for structural optimization , 1987 .

[29]  Mu Zhu,et al.  Casting and Milling Restrictions in Topology Optimization via Projection-Based Algorithms , 2012, DAC 2012.

[30]  Qi Xia,et al.  A level set based method for the optimization of cast part , 2010 .

[31]  Yongsheng Ma,et al.  A survey of manufacturing oriented topology optimization methods , 2016, Adv. Eng. Softw..

[32]  G. Cheng,et al.  An identification method for enclosed voids restriction in manufacturability design for additive manufacturing structures , 2015 .

[33]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[34]  M. Wang,et al.  A new level set method for systematic design of hinge-free compliant mechanisms , 2008 .

[35]  O. Sigmund,et al.  Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.

[36]  O. Sigmund,et al.  Design of manufacturable 3D extremal elastic microstructure , 2014 .

[37]  George I. N. Rozvany,et al.  A critical review of established methods of structural topology optimization , 2009 .

[38]  James K. Guest,et al.  Achieving minimum length scale in topology optimization using nodal design variables and projection functions , 2004 .

[39]  Qi Xia,et al.  Simultaneous optimization of cast part and parting direction using level set method , 2011 .

[40]  G. Allaire,et al.  Thickness control in structural optimization via a level set method , 2016, Structural and Multidisciplinary Optimization.

[41]  T. Shi,et al.  Constraints of distance from boundary to skeleton: For the control of length scale in level set based structural topology optimization , 2015 .

[42]  Jihong Zhu,et al.  Structural design of aircraft skin stretch-forming die using topology optimization , 2013, J. Comput. Appl. Math..

[43]  M. Bendsøe,et al.  Topology optimization of heat conduction problems using the finite volume method , 2006 .

[44]  Ole Sigmund,et al.  Manufacturing tolerant topology optimization , 2009 .

[45]  Kurt Maute,et al.  Level-set methods for structural topology optimization: a review , 2013 .

[46]  Michael Yu Wang,et al.  Shape feature control in structural topology optimization , 2008, Comput. Aided Des..

[47]  F. Navarrina,et al.  Topology optimization of continuum structures with local and global stress constraints , 2009 .

[48]  O. Sigmund,et al.  Robust topology optimization accounting for spatially varying manufacturing errors , 2011 .

[49]  Ole Sigmund,et al.  Topology optimization of microfluidic mixers , 2009 .

[50]  James K. Guest,et al.  Imposing maximum length scale in topology optimization , 2009 .

[51]  Michael Yu Wang,et al.  Shape and topology optimization of compliant mechanisms using a parameterization level set method , 2007, J. Comput. Phys..