Catalytic behavior of Pt nanoparticles dealuminated Y-zeolite for some n-alkane hydroisomerization

Abstract Dealuminated zeolite Y-supported platinum was prepared adopting two dealumination methods, viz. fast (1, 3 and 6 h) and slow method (18 h). The content of Pt was constant at 0.5 wt% in all investigated catalysts. The prepared samples were characterized using TGA/DSC, XRD, FTIR techniques, nitrogen adsorption at −196 °C and TEM-connected with energy dispersive spectroscopy (EDS). Surface acidity was investigated via pyridine adsorption using FT-IR spectroscopy. The parent and dealuminated Y-zeolite samples were characterized by their microporous system. By increasing the dealumination time to 6 h, the increased specific surface area and total pore volume indicated a sort of pore opening taking place with an increase in the accessibility of nitrogen molecules. DSC confirmed the thermal stability of the dealuminated zeolite samples up to 800 °C. The prepared catalysts were tested through hydroisomerization reactions of n-hexane and n-heptane using a micro-catalytic pulse technique. Different catalytic behaviors could be distinguished for the dealuminated samples based on competitive reactions; hydro-isomerization, hydrocracking and cyclization. Slow dealumination leads to the most selective catalysts for hydroisomerization. n-Heptane was converted to higher extent than n-hexane; cracking process was more evident when the former was fed to the reactor.

[1]  Son-Ki Ihm,et al.  Comparison of Pt/zeolite catalysts for n-hexadecane hydroisomerization , 2000 .

[2]  W. S. Veeman,et al.  Study of the transformation of small-port into large-port mordenite by magic-angle spinning NMR and infrared spectroscopy , 1988 .

[3]  M. Ramos,et al.  Hydroisomerization of n-octane over platinum catalysts with or without binder , 2005 .

[4]  M. Ramos,et al.  Influence of the Binder on the n-Octane Hydroisomerization over Palladium-Containing Zeolite Catalysts , 2004 .

[5]  M. Ramos,et al.  Hydroisomerization of C6–C8 n-alkanes, cyclohexane and benzene over palladium and platinum beta catalysts agglomerated with bentonite , 2006 .

[6]  Jun Wang,et al.  Hydroisomerization of n-Heptane Over Cr Promoted Pt-bearing H3PW12O40 Catalysts Supported on Dealuminated USY Zeolite , 2009 .

[7]  P. Smirniotis,et al.  Pt/H-ZSM-12 as a catalyst for the hydroisomerization of C5–C7 n-alkanes and simultaneous saturation of benzene , 2003 .

[8]  J. Klinowski,et al.  Dealumination of zeolite Y by H4EDTA , 1993 .

[9]  M. Misono,et al.  Hydroisomerization of n-hexane and n-heptane over platinum-promoted Cs2.5H0.5PW12O40 (Cs2.5) studied in comparison with several other solid acids , 2000 .

[10]  Miss A.O. Penney (b) , 1974, The New Yale Book of Quotations.

[11]  E. Selli,et al.  Pyridine and ammonia as probes for FTIR analysis of solid acid catalysts , 1996 .

[12]  J. González-Velasco,et al.  Enhanced activity of zeolites by chemical dealumination for chlorinated VOC abatement , 2003 .

[13]  Andrew G. Glen,et al.  APPL , 2001 .

[14]  H. Kung,et al.  Role of Lewis Acidity in the Deactivation of USY Zeolites during 2-Methylpentane Cracking , 1997 .

[15]  A. Corma,et al.  Hydroisomerization of Pentane, Hexane, and Heptane for Improving the Octane Number of Gasoline , 1999 .

[16]  J. C. Jansen,et al.  Technical and economical evaluation of a zeolite membrane based heptane hydroisomerization process , 2005 .

[17]  J. M. Lopes,et al.  A FT-IR study of deactivation phenomena during methylcyclohexane transformation on H-USY zeolites: Nitrogen poisoning, coke formation, and acidity–activity correlations , 2007 .

[18]  G. Magnacca,et al.  Infrared study of some surface properties of boehmite (γ-AlO2H) , 1992 .

[19]  B. Gil,et al.  IR study of heterogeneity of OH groups in zeolite HY-splitting of OH and OD bands , 2003 .

[20]  G. G. Stokes "J." , 1890, The New Yale Book of Quotations.

[21]  F. Márquez,et al.  Activity, Selectivity, and Sulfur Resistance of Pt/WOx–ZrO2 and Pt/Beta Catalysts for the Simultaneous Hydroisomerization of n-Heptane and Hydrogenation of Benzene , 2000 .

[22]  M. Guisnet,et al.  Dealumination of Y zeolites with ammonium hexafluorosilicate: Effect of washing on the hydrothermal stability , 1990 .

[23]  J. Lavalley,et al.  Quantitative infrared study of the distinct acidic hydroxyl groups contained in modified Y zeolites , 1994 .

[24]  P. Borges,et al.  Activity–acidity relationship for alkane cracking over zeolites: n-hexane cracking over HZSM-5 , 2005 .

[25]  M. Ramos,et al.  Effect of the metal loading in the hydroisomerization of n-octane over beta agglomerated zeolite based catalysts , 2005 .

[26]  S. Ernst,et al.  Spectroscopic and Catalytic Characterization of Faujasites Dealuminated VIA the (NH4)2SiF6 Method , 1988 .

[27]  R. Roldán,et al.  Hydroisomerization of a hydrocarbon feed containing n-hexane, n-heptane and cyclohexane on zeolite-supported platinum catalysts , 2003 .

[28]  B. Gil,et al.  In situ thermogravimetry in an infrared spectrometer: an answer to quantitative spectroscopy of adsorbed species on heterogeneous catalysts , 2004 .

[29]  M. E. Borges,et al.  Catalytic behaviour of Pt or Pd metal nanoparticles–zeolite bifunctional catalysts for n-pentane hydroisomerization , 2007 .

[30]  M. Popova,et al.  Transalkylation of toluene with cumene over zeolites Y dealuminated in solid-state. Part I. Effect of the alteration of Broensted acidity , 2003 .

[31]  J. Lynch,et al.  Characterization of the Secondary Pore System in Dealuminated HY Zeolites Comparison between Isomorphous Substitution and Hydrothermal Treatment , 1988 .