Passive optical combustion sensors for scramjet engine control

[1]  Jerry Seitzman,et al.  INTERPRETATION OF OPTICAL EMISSIONS FOR SENSORS IN LIQUID FUELED COMBUSTORS , 2001 .

[2]  Paul King,et al.  Scramjet Isolator Shock Train Location Techniques , 2011 .

[3]  M. Akella,et al.  Unstart Detection in a Simplified-Geometry Hypersonic Inlet-Isolator Flow , 2010 .

[4]  Y. Hardalupas,et al.  Local measurements of the time-dependent heat release rate and equivalence ratio using chemiluminescent emission from a flame , 2004 .

[5]  M. Q. McQuay,et al.  An experimental study on the effect of pressure and strain rate on CH chemiluminescence of premixed fuel-lean methane/air flames , 2001 .

[6]  Ronald K. Hanson,et al.  Diode laser-based detection of combustor instabilities with application to a scramjet engine , 2009 .

[7]  Sean M. Torrez,et al.  Heat Release Distribution in a Dual-Mode Scramjet Combustor - Measurements and Modeling , 2009 .

[8]  J. Driscoll,et al.  Combustion characteristics of a dual-mode scramjet combustor with cavity flameholder , 2009 .

[9]  Wright-Patterson Afb,et al.  Simultaneous High-Frequency Pressure and TDLAS Measurements in a Small-Scale Axisymmetric Isolator with Bleed , 2012 .

[10]  Jerry Seitzman,et al.  Chemiluminescence Based Sensors for Turbine Engines , 2003 .

[11]  Matthew Fotia,et al.  Ram-Scram Transition and Flame/Shock-Train Interactions in a Model Scramjet Experiment , 2013 .

[12]  P. S. Wyckoff,et al.  On the Adequacy of Certain Experimental Observables as Measurements of Flame Burning Rate , 1998 .

[13]  Jerry Seitzman,et al.  CH∗ chemiluminescence modeling for combustion diagnostics , 2009 .

[14]  Javier Ballester,et al.  Diagnostic techniques for the monitoring and control of practical flames , 2010 .