A new cycle test system emulating inductive switching waveforms

Cycle life testing of smart power switches requires significant hardware effort to provide the required ohmic-inductive load patterns. A new reliability test system for research purposes is therefore introduced that generates arbitrary current waveforms to emulate inductive switching behavior. This allows flexible cycle stress testing of integrated power switches under arbitrary application conditions. The current drivers of the proposed "ARCTIS" test system are protected from thermal overload in case of failure of a stressed device using a combination of case temperature sensing and a thermal equivalent circuit. Therefore the power MOSFETs in the output stage may be utilized to the limits of their dynamical safe operating area. All devices under test are continuously monitored for short circuit and open load failures. The respective waveforms and failure events are digitally recorded by the PXI-based control system to obtain a statistical basis for the evaluation of cycle life time.

[1]  G. Sarrabayrouse,et al.  Thermal characterization of LDMOS transistors for accelerating stress testing , 2000 .

[2]  E. Dallago,et al.  Thermal resistance analysis by induced transient (TRAIT) method for power electronic devices thermal characterization. I. Fundamentals and theory , 1998 .

[3]  I. Pages,et al.  Reliability characterization of LDMOS transistors submitted to multiple energy discharges , 2000, 12th International Symposium on Power Semiconductor Devices & ICs. Proceedings (Cat. No.00CH37094).

[4]  M. Glavanovics,et al.  Thermal destruction testing: An indirect approach to a simple dynamic thermal model of smart power switches , 2001, Proceedings of the 27th European Solid-State Circuits Conference.

[5]  M. Glavanovics,et al.  Impact of thermal overload operation on wirebond and metallization reliability in smart power devices , 2004, Proceedings of the 30th European Solid-State Circuits Conference (IEEE Cat. No.04EX850).

[6]  Thierry Lequeu,et al.  Operation of power semiconductors under transient thermal conditions: thermal fatigue reliability and mechanical aspects , 2001, Microelectron. Reliab..

[7]  E. J. Diebold,et al.  Transient thermal impedance of semiconductor devices , 1961, Transactions of the American Institute of Electrical Engineers Part I Communication and Electronics.

[8]  E. Dallago,et al.  Thermal resistance analysis by induced transient (TRAIT) method for power electronic devices thermal characterization. II. Practice and experiments , 1998 .

[9]  M. Stecher,et al.  Influence of inhomogeneous current distribution on the thermal SOA of integrated DMOS transistors , 2004, 2004 Proceedings of the 16th International Symposium on Power Semiconductor Devices and ICs.