A C0-type zig–zag theory and finite element for laminated composite and sandwich plates with general configurations

In order to conveniently develop C0 continuous element for the accurate analysis of laminated composite and sandwich plates with general configurations, this paper develops a C0-type zig–zag theory in which the interlaminar continuity of transverse shear stresses is a priori satisfied and the number of unknowns is independent of the number of layers. The present theory is applicable not only to the cross-ply but also to the angle-ply laminated composite and sandwich plates. On the premise of retaining the merit of previous zig–zag theories, the derivatives of transverse displacement have been taken out from the displacement fields. Therefore, based on the proposed zig–zag theory, it is very easy to construct the C0 continuous element. To assess the performance of the proposed model, the classical quadratic six-node triangular element with seven degrees of freedom at each node is presented for the static analysis of laminated composite and sandwich plates. The typical examples are taken into account to assess the performance of finite element based on the proposed zig–zag theory by comparing the present results with the three-dimensional elasticity solutions. Numerical results show that the present model can produce the more accurate deformations and stresses compared with the previous zig–zag theories.

[1]  Maenghyo Cho,et al.  Higher order zig-zag theory for smart composite shells under mechanical-thermo-electric loading , 2007 .

[2]  Abdul Hamid Sheikh,et al.  A new triangular element to model inter-laminar shear stress continuous plate theory , 2004 .

[3]  Shear deformation in thermal bending analysis of laminated plates by the GDQ method , 2003 .

[4]  Yogesh M. Desai,et al.  Analytical solutions for vibrations of laminated and sandwich plates using mixed theory , 2004 .

[5]  Ugo Icardi,et al.  Higher-order zig-zag model for analysis of thick composite beams with inclusion of transverse normal stress and sublaminates approximations , 2001 .

[6]  Marco Di Sciuva,et al.  Multilayered anisotropic plate models with continuous interlaminar stresses , 1992 .

[7]  Djordje Vuksanović,et al.  Linear analysis of laminated composite plates using single layer higher-order discrete models , 2000 .

[8]  A. H. Sheikh,et al.  Analysis of Laminated Sandwich Plates Based on Interlaminar Shear Stress Continuous Plate Theory , 2005 .

[9]  Wenbin Yu,et al.  Mathematical construction of a Reissner¿Mindlin plate theory for composite laminates , 2005 .

[10]  Jinho Oh,et al.  A finite element based on cubic zig-zag plate theory for the prediction of thermo-electric-mechanical behaviors , 2004 .

[11]  M. D. Sciuva,et al.  BENDING, VIBRATION AND BUCKLING OF SIMPLY SUPPORTED THICK MULTILAYERED ORTHOTROPIC PLATES: AN EVALUATION OF A NEW DISPLACEMENT MODEL , 1986 .

[12]  C. Hong.  Thermal bending analysis of shear-deformable laminated anisotropic plates by the GDQ method , 2009 .

[13]  Santosh Kapuria,et al.  Free vibration analysis of composite and sandwich plates using an improved discrete Kirchhoff quadrilateral element based on third-order zigzag theory , 2008 .

[14]  Tarun Kant,et al.  Analytical solutions for free vibration of laminated composite and sandwich plates based on a higher-order refined theory , 2001 .

[15]  Santosh Kapuria,et al.  A coupled zigzag theory for the dynamics of piezoelectric hybrid cross-ply plates , 2005 .

[16]  Alexander Tessler,et al.  A {3,2}-order bending theory for laminated composite and sandwich beams , 1998 .

[17]  Maenghyo Cho,et al.  Higher order zig-zag plate theory under thermo-electric-mechanical loads combined , 2003 .

[18]  A. H. Shah,et al.  Natural Vibrations of Laminated and Sandwich Plates , 2004 .

[19]  Bhanu Singh,et al.  An improved higher order zigzag theory for the static analysis of laminated sandwich plate with soft core , 2008 .

[20]  Maenghyo Cho,et al.  Enhanced first-order theory based on mixed formulation and transverse normal effect , 2007 .

[21]  Santosh Kapuria,et al.  An efficient higher order zigzag theory for composite and sandwich beams subjected to thermal loading , 2003 .

[22]  Santosh Kapuria,et al.  AN EFFICIENT HIGHER-ORDER ZIGZAG THEORY FOR LAMINATED PLATES SUBJECTED TO THERMAL LOADING , 2004 .

[23]  Aftab A. Mufti,et al.  Stability of sandwich plates by mixed, higher-order analytical formulation , 2003 .

[24]  N. Pagano,et al.  Exact Solutions for Rectangular Bidirectional Composites and Sandwich Plates , 1970 .

[25]  M. Nataraja,et al.  Bending of sandwich plates with anti-symmetric angle-ply face sheets – Analytical evaluation of higher order refined computational models , 2006 .

[26]  Abdul Hamid Sheikh,et al.  VIBRATION OF LAMINATE-FACED SANDWICH PLATE BY A NEW REFINED ELEMENT , 2004 .

[27]  Hiroyuki Matsunaga,et al.  A comparison between 2-D single-layer and 3-D layerwise theories for computing interlaminar stresses of laminated composite and sandwich plates subjected to thermal loadings , 2004 .

[28]  M. Cho,et al.  A new postprocessing method for laminated composites of general lamination configurations , 2001 .

[29]  Santosh Kapuria,et al.  Nonlinear coupled zigzag theory for buckling of hybrid piezoelectric plates , 2006 .

[30]  Santosh Kapuria,et al.  Assessment of zigzag theory for static loading, buckling, free and forced response of composite and sandwich beams , 2004 .

[31]  Yogesh M. Desai,et al.  STABILITY OF COMPOSITE AND SANDWICH STRUTS BY MIXED FORMULATION , 2004 .

[32]  Marco Gherlone,et al.  A global/local third-order Hermitian displacement field with damaged interfaces and transverse extensibility: FEM formulation , 2003 .

[33]  E. Carrera.  Historical review of Zig-Zag theories for multilayered plates and shells , 2003 .

[34]  J. Reddy.  A Simple Higher-Order Theory for Laminated Composite Plates , 1984 .

[35]  Maenghyo Cho,et al.  An efficient higher-order plate theory for laminated composites , 1992 .

[36]  Santosh Kapuria,et al.  Nonlinear zigzag theory for electrothermomechanical buckling of piezoelectric composite and sandwich plates , 2006 .