Green Supply-Chain Management: A State-of-the-Art Literature Review

There is a growing need for integrating environmentally sound choices into supply-chain management research and practice. Perusal of the literature shows that a broad frame of reference for green supply-chain management (GrSCM) is not adequately developed. Regulatory bodies that formulate regulations to meet societal and ecological concerns to facilitate growth of business and economy also suffer from its absence. A succinct classification to help academicians, researchers and practitioners in understanding integrated GrSCM from a wider perspective is needed. Further, sufficient literature is available to warrant such classification. This paper takes an integrated and fresh look into the area of GrSCM. The literature on GrSCM is covered exhaustively from its conceptualization, primarily taking a 'reverse logistics angle'. Using the rich body of available literature, including earlier reviews that had relatively limited perspectives, the literature on GrSCM is classified on the basis of the problem context in supply chain's major influential areas. It is also classified on the basis of methodology and approach adopted. Various mathematical tools/techniques used in literature vis-a-vis the contexts of GrSCM are mapped. A timeline indicating relevant papers is also provided as a ready reference. Finally, the findings and interpretations are summarized, and the main research issues and opportunities are highlighted.

[1]  Surendra M. Gupta,et al.  Petri net approach to disassembly process planning for products with complex AND/OR precedence relationships , 2001, Eur. J. Oper. Res..

[2]  Daoud Aït-Kadi,et al.  Integration of reverse logistics activities within a supply chain information system , 2005, Comput. Ind..

[3]  Ruud H. Teunter,et al.  Production , Manufacturing and Logistics The newsboy problem with resalable returns : A single period model and case study , 2005 .

[4]  Pauli Miettinen,et al.  How to benefit from decision analysis in environmental life cycle assessment (LCA) , 1997 .

[5]  Rajesh Srivastava,et al.  Inventory buffers in recoverable manufacturing , 1998 .

[6]  V D R Guide,et al.  A closed-loop logistics model for remanufacturing , 1999, J. Oper. Res. Soc..

[7]  V. Guide Production planning and control for remanufacturing: industry practice and research needs , 2000 .

[8]  Paul S Phillips,et al.  The development of strategic and tactical tools, using systems analysis, for waste management in large complex organisations: a case study in UK healthcare waste , 2005 .

[9]  Jens Schumacher,et al.  Logistics simulation of recycling networks , 1998 .

[10]  N. E. Gallopoulos,et al.  Strategies for Manufacturing , 1989 .

[11]  Christoph Bey Quo Vadis Industrial Ecology , 2001 .

[12]  Samar K. Mukhopadhyay,et al.  Optimal return policy and modular design for build-to-order products , 2005 .

[13]  Robert U. Ayres,et al.  The Impact of Remanufacturing in the Economy , 2000 .

[14]  C. Carter,et al.  REVERSE LOGISTICS: A REVIEW OF THE LITERATURE AND FRAMEWORK FOR FUTURE INVESTIGATION , 1998 .

[15]  Ronald J Kopicki,et al.  REUSE AND RECYCLING -- REVERSE LOGISTICS OPPORTUNITIES / , 1993 .

[16]  Joseph R. Fiksel,et al.  Design for environment : creating eco-efficient products and processes , 1996 .

[17]  Andrew King,et al.  An Assessment of Design-for-Environment Practices in Leading US Electronics Firms , 2000, Interfaces.

[18]  Rajesh Srivastava,et al.  Product structure complexity and scheduling of operations in recoverable manufacturing , 1997 .

[19]  L. V. Wassenhove,et al.  Quantitative approaches to distribution logistics and supply chain management , 2002 .

[20]  R. Teunter,et al.  On the necessity of a disposal option for returned items that can be remanufactured , 2002 .

[21]  Distribution Logistics , 2008, Encyclopedia of GIS.

[22]  Ronald S. Tibben-Lembke,et al.  Going Backwards: Reverse Logistics Trends and Practices , 1999 .

[23]  Thomas E. Graedel,et al.  Material substitution: a resource supply perspective , 2002 .

[24]  Simme Douwe P. Flapper,et al.  Managing closed-loop supply chains , 2005 .

[25]  Takeshi Hoshino,et al.  Optimization analysis for recycle-oriented manufacturing systems , 1995 .

[26]  Michael Søgaard Jørgensen,et al.  Models for Defining LCM, Monitoring LCM Practice and Assessing its Feasibility , 2004 .

[27]  P. C. Schuur,et al.  Business case Océ: Reverse logistic network re-design for copiers , 1999 .

[28]  Haw‐Jan Wu,et al.  Environmentally responsible logistics systems , 1995 .

[29]  T. Spengler,et al.  Environmental integrated production and recycling management , 1997 .

[30]  A. Kriwet,et al.  Integration of Recycling Considerations Into Product Design — A System Approach , 1994 .

[31]  Michael P. Pugh,et al.  The use of mathematical models in evaluating resource recovery options , 1993 .

[32]  Rommert Dekker,et al.  Inventory Control in Hybrid Systems with Remanufacturing , 1999 .

[33]  Peter Schuur,et al.  On a medium term product recovery and disposal strategy for durable assembly products , 1998 .

[34]  Surendra M. Gupta,et al.  A petri net approach to disassembly process planning , 1998 .

[35]  Erik Rolland,et al.  The design of reverse distribution networks: Models and solution procedures , 2003, Eur. J. Oper. Res..

[36]  Knut Richter,et al.  Remanufacturing planning for the reverse Wagner/Whitin models , 2000, Eur. J. Oper. Res..

[37]  E. A. van deLaan,et al.  Production planning and inventory control with remanufacturing and disposal , 1997 .

[38]  Linda C. Angell,et al.  Integrating environmental issues into the mainstream: an agenda for research in operations management , 1999 .

[39]  Rommert Dekker,et al.  A stochastic approach to a case study for product recovery network design , 2005, Eur. J. Oper. Res..

[40]  Chwen Sheu,et al.  A model for reverse logistics entry by third-party providers , 2002 .

[41]  Anshuman Khare,et al.  European response to issues in recycling car plastics , 1999 .

[42]  Jacqueline M. Bloemhof-Ruwaard,et al.  THE IMPACT OF PRODUCT RECOVERY ON LOGISTICS NETWORK DESIGN , 2001 .

[43]  R. Roy,et al.  Successful recycling through value-chain collaboration , 1992 .

[44]  J. Stock Development and implementation of reverse logistics programs , 1998 .

[45]  Toshihiko Masui,et al.  Policy evaluations under environmental constraints using a computable general equilibrium model , 2005, Eur. J. Oper. Res..

[46]  V. Daniel R. Guide,et al.  An evaluation of order release strategies in a remanufacturing environment , 1997, Comput. Oper. Res..

[47]  E. Silver,et al.  Forecasting the returns of reusable containers , 1989 .

[48]  Mark D. Hanna,et al.  Operations and environment: an expanded focus for TQM , 1995 .

[49]  S. Minner Multiple-supplier inventory models in supply chain management: A review , 2003 .

[50]  A. Tan,et al.  Improving the performance of a computer company in supporting its reverse logistics operations in the Asia‐Pacific region , 2003 .

[51]  Hokey Min,et al.  A genetic algorithm approach to developing the multi-echelon reverse logistics network for product returns , 2006 .

[52]  Vaidyanathan Jayaraman,et al.  A service logistics model for simultaneous siting of facilities and multiple levels of equipment , 1995, Comput. Oper. Res..

[53]  V. Daniel R. Guide,et al.  Building contingency planning for closed-loop supply chains with product recovery , 2003 .

[54]  René B.M. de Koster Marisa P. de Brito,et al.  Return handling: an exploratory study with nine retailer warehouses , 2002 .

[55]  R. Lackes,et al.  Supply chain management and reverse logistics , 2004 .

[56]  Ian Haynes,et al.  Accelerated Product Development: An Experience with Small and Medium‐sized Companies , 1994 .

[57]  J. Ashayeri,et al.  Inventory management of repairable service parts for personal computers : A case study , 1996 .

[58]  R. Dekker,et al.  Reverse logistics : quantitative models for closed-loop supply chains , 2004 .

[59]  Simme Douwe P. Flapper,et al.  A facility location allocation model for reusing carpet materials , 1999 .

[60]  Yasutaka Kainuma,et al.  A multiple attribute utility theory approach to lean and green supply chain management , 2006 .

[61]  Ad J. de Ron,et al.  Disassembly and recycling of electronic consumer products: an overview , 1995 .

[62]  Marianne Jahre Household waste collection as a reverse channel , 1995 .

[63]  Shimon Y. Nof Information and collaboration models of integration , 1994 .

[64]  Anshuman Khare,et al.  Economic issues in recycling end-of-life vehicles , 2000 .

[65]  E. Sundin,et al.  Making functional sales environmentally and economically beneficial through product remanufacturing , 2005 .

[66]  E. A. van deLaan,et al.  An (s,Q) inventory model with remanufacturing and disposal , 1996 .

[67]  Carsten W. Scherer,et al.  Computational issues in a stochastic finite horizon one product recovery inventory model , 2003, Eur. J. Oper. Res..

[68]  Geraldo Ferrer,et al.  The economics of personal computer remanufacturing , 1997 .

[69]  Hoda A. ElMaraghy,et al.  Planning of Products Assembly and Disassembly , 1992 .

[70]  Jiuh-Biing Sheu,et al.  An Integrated Logistics Operational Model for Green-Supply Chain Management , 2005 .

[71]  Marisa de Brito,et al.  Reverse Logistics: A Review of Case Studies , 2004 .

[72]  Said Salhi,et al.  Discrete Location Theory , 1991 .

[73]  Shuang-Hua Yang,et al.  Optimization of the process for recovering caprolactam from wastewater in a pulsed-sieve-plate column using green design methodologies , 2004 .

[74]  B. W. Marguglio,et al.  Environmental management systems , 1991 .

[75]  M. Porter,et al.  Toward a New Conception of the Environment-Competitiveness Relationship , 1995 .

[76]  Mahmoud M. El-Halwagi,et al.  Optimal recycle/reuse policies for minimizing the wastes of pulp and paper plants∗ , 1993 .

[77]  Hokey Min,et al.  Green purchasing practices of US firms , 2001 .

[78]  Rommert Dekker,et al.  A characterisation of logistics networks for product recovery , 2000 .

[79]  M. Ivimey Annual report , 1958, IRE Transactions on Engineering Writing and Speech.

[80]  Joseph Sarkis,et al.  RELATIONSHIPS BETWEEN OPERATIONAL PRACTICES AND PERFORMANCE AMONG EARLY ADOPTERS OF GREEN SUPPLY CHAIN MANAGEMENT PRACTICES IN CHINESE MANUFACTURING ENTERPRISES , 2004 .

[81]  John A. Muckstadt,et al.  An analysis of single item inventory systems with returns , 1981 .

[82]  Amit Gupta Approximate Solution of a Single-Base Multi-indentured Repairable-item Inventory System , 1993 .

[83]  Frederic H. Murphy,et al.  Compensating for non-homogeneity in decision-making units in data envelopment analysis , 2003, Eur. J. Oper. Res..

[84]  Michael Godfrey,et al.  Incorporating transportation costs into inventory replenishment decisions , 2002 .

[85]  Luk N. Van Wassenhove,et al.  Closed - Loop Supply Chain Models with Product Remanufacturing , 2004, Manag. Sci..

[86]  Surendra M. Gupta,et al.  Disassembly of multiple product structures , 1997 .

[87]  I. K. Hui,et al.  A study of the Environmental Management System implementation practices , 2001 .

[88]  V. Daniel R. Guide,et al.  The Reverse Supply Chain , 2002 .

[89]  D. Pujari,et al.  Green and competitive: Influences on environmental new product development performance , 2003 .

[90]  D. Heyman Optimal disposal policies for a single‐item inventory system with returns , 1977 .

[91]  Askiner Gungor,et al.  Issues in environmentally conscious manufacturing and product recovery: a survey , 1999 .

[92]  L. V. Wassenhove,et al.  MANAGING PRODUCT RETURNS FOR REMANUFACTURING , 2001 .

[93]  Marc Salomon,et al.  The capacitated distribution and waste disposal problem. , 1996 .

[94]  R. Srivastava,et al.  Production planning and control for remanufacturing: a state - of - the - art survey , 1999 .

[95]  Joeseph Sarkis,et al.  A methodological framework for evaluating environmentally conscious manufacturing programs , 1999 .

[96]  Trevor A Spedding,et al.  Creating a Green Supply Chain , 2001 .

[97]  Mahesh Gupta,et al.  Environmental management and its impact on the operations function , 1995 .

[98]  V. Guide,et al.  A Hierarchical Decision Model for Re-manufacturing and Re-use , 2003 .

[99]  H. Groenevelt,et al.  COMPETITION IN REMANUFACTURING , 2001 .

[100]  B. Pelegrín,et al.  The return plant location problem: Modelling and resolution , 1998 .

[101]  Myer Kutz Environmentally conscious manufacturing , 2007 .

[102]  Jitendr a Kumar Das Responding to Green Concerns: The Roles for Government and Business , 2002 .

[103]  Stephen Lippmann,et al.  Supply chain environmental management: Elements for success , 1999 .

[104]  Vittorio Maniezzo,et al.  A decision support system for urban waste management , 1998, Eur. J. Oper. Res..

[105]  Walter Wehrmeyer,et al.  The Relationship between the Environmental and Economic Performance of Firms , 2001 .

[106]  J. Stock,et al.  MANY HAPPY (PRODUCT) RETURNS , 2002 .

[107]  George Foo,et al.  Design for X (DFX): Key to competitive, profitable products , 1990, AT&T Technical Journal.

[108]  Eva Samakovlis,et al.  Revaluing the hierarchy of paper recycling , 2004 .

[109]  M. S. Spencer,et al.  An evaluation of capacity planning techniques in a remanufacturing environment , 1997 .

[110]  Samir K. Srivastava,et al.  Managing product returns for reverse logistics , 2006 .

[111]  Rommert Dekker,et al.  Controlling inventories with stochastic item returns: A basic model , 2002, Eur. J. Oper. Res..

[112]  Dimitrios Vlachos,et al.  An inventory system with two supply modes and capacity constraints , 2001 .

[113]  Michael R. Johnson,et al.  Planning product disassembly for material recovery opportunities , 1995 .

[114]  Pavan Sukhdev,et al.  Costing the Earth , 2009, Nature.

[115]  Surendra M. Gupta,et al.  Economic Consequences of Increasing Polymer Content for the U.S. Automobile Recycling Infrastructure , 1997 .

[116]  A. Campbell,et al.  Corporate strategy: The quest for parenting advantage , 1995 .

[117]  Li-Hsing Shih,et al.  Reverse logistics system planning for recycling electrical appliances and computers in Taiwan , 2001 .

[118]  Tsai C. Kuo,et al.  Environmentally conscious design and manufacturing: A state-of-the-art survey , 1997 .

[119]  W. C. Benton,et al.  A joint optimization of product variety and ordering approach , 1998, Comput. Oper. Res..

[120]  Jacquetta Lee,et al.  Critical review of life cycle analysis and assessment techniques and their application to commercial activities , 1995 .

[121]  Gregory Theyel Customer and Supplier Relations for Environmental Performance , 2001 .

[122]  V D R Guide,et al.  Buffering from material recovery uncertainty in a recoverable manufacturing environment , 1997 .

[123]  Surendra M. Gupta,et al.  Disassembly sequence planning for products with defective parts in product recovery , 1998 .

[124]  Rommert Dekker,et al.  An investigation of lead-time effects in manufacturing/remanufacturing systems under simple PUSH and PULL control strategies , 1999, Eur. J. Oper. Res..

[125]  Dilip Chhajed,et al.  Production, Manufacturing and Logistics An integrated product returns model with logistics and marketing coordination , 2005 .

[126]  Rommert Dekker,et al.  A two-level network for recycling sand: A case study , 1998, Eur. J. Oper. Res..

[127]  Ehud Kroll,et al.  A Methodology to Evaluate Ease of Disassembly for Product Recycling , 1996 .

[128]  Christian N Madu,et al.  A hierarchic metric approach for integration of green issues in manufacturing: a paper recycling application. , 2002, Journal of environmental management.

[129]  Mehdi Amini,et al.  Designing a reverse logistics operation for short cycle time repair services , 2005 .

[130]  Bert Bras,et al.  Product, process, and organizational design for remanufacture – an overview of research , 1999 .

[131]  Hokey Min,et al.  Combined location-routing problems: A synthesis and future research directions , 1998, Eur. J. Oper. Res..

[132]  W. C. Benton,et al.  Supply-Chain Management for Recoverable Manufacturing Systems , 2000, Interfaces.

[133]  Aart van Harten,et al.  Business case Roteb: recovery strategies for monitors , 1999 .

[134]  A. Colorni,et al.  The regional urban solid waste management system: A modelling approach , 1993 .

[135]  Wujin Chu,et al.  Controlling product returns in direct marketing , 1996 .

[136]  L. N. Van Wassenhove,et al.  Concurrent product and closed-loop supply chain design with an application to refrigerators , 2003 .

[137]  Maria Cândida Mourão,et al.  Heuristic method for a mixed capacitated arc routing problem: A refuse collection application , 2005, Eur. J. Oper. Res..

[138]  D. C. Whybark,et al.  From garbage to goods: Successful remanufacturing systems and skills , 2000 .

[139]  I. Boustead,et al.  Handbook of industrial energy analysis , 1979 .

[140]  D. Norman,et al.  Environmental Management Systems: Do They Improve Performance? , 2003 .

[141]  Jack R. Meredith,et al.  Theory Building through Conceptual Methods , 1993 .

[142]  D. Richards Environmentally Conscious Manufacturing , 1994 .

[143]  Karen R. Chinander,et al.  ALIGNING ACCOUNTABILITY AND AWARENESS FOR ENVIRONMENTAL PERFORMANCE IN OPERATIONS , 2001 .

[144]  V. Daniel,et al.  Scheduling with priority dispatching rules and drum-buffer-rope in a recoverable manufacturing system , 1997 .

[145]  A. Kriwet,et al.  Systematic integration of design-for-recycling into product design , 1995 .

[146]  Jacqueline M. Bloemhof-Ruwaard,et al.  An environmental life cycle optimization model for the European pulp and paper industry , 1996 .

[147]  Vaidyanathan Jayaraman,et al.  The effect of lead time variation on the performance of disassembly release mechanisms , 1999 .

[148]  Joseph Sarkis,et al.  Greener manufacturing and operations : from design to delivery and back /ed. by Joseph Sarkis , 2002 .

[149]  P. Eagan,et al.  Solutions to health care waste: life-cycle thinking and "green" purchasing. , 2001, Environmental health perspectives.

[150]  Bhaba R. Sarker,et al.  Discrete location theory , 1991 .

[151]  Shad Dowlatshahi,et al.  Developing a Theory of Reverse Logistics , 2000, Interfaces.

[152]  Paul Shrivastava,et al.  Environmental technologies and competitive advantage , 1995 .

[153]  Erwin van der Laan,et al.  Product remanufacturing and disposal: A numerical comparison of alternative control strategies , 1996 .

[154]  Robert D. Klassen,et al.  PLANT‐LEVEL ENVIRONMENTAL MANAGEMENT ORIENTATION: THE INFLUENCE OF MANAGEMENT VIEWS AND PLANT CHARACTERISTICS , 2001 .

[155]  Rajesh Srivastava,et al.  Scheduling policies for remanufacturing , 1997 .

[156]  Anna Nagurney,et al.  Reverse supply chain management and electronic waste recycling: a multitiered network equilibrium framework for e-cycling , 2005 .

[157]  Geraldo Ferrer,et al.  The economics of tire remanufacturing , 1997 .

[158]  D. Lambert,et al.  SUPPLY CHAIN MANAGEMENT , 2003 .

[159]  K. Richter,et al.  Analysis of the EOQ repair and waste disposal problem with integer setup numbers , 1999 .

[160]  Erwin van der Laan,et al.  Quantitative models for reverse logistics: A review , 1997 .

[161]  Michel Gendreau,et al.  Dynamic and Stochastic Models for the Allocation of Empty Containers , 1993, Oper. Res..

[162]  V. Daniel R. Guide,et al.  Repairable inventory theory: Models and applications , 1997 .

[163]  L. V. Wassenhove,et al.  Interactions between operational research and environmental management , 1995 .

[164]  Giuliano Noci,et al.  Measuring the environmental performance of new products: an integrated approach , 1996 .

[165]  K. Richter,et al.  The reverse Wagner/Whitin model with variable manufacturing and remanufacturing cost , 2001 .

[166]  H L Michael,et al.  MANAGEMENT OF RESEARCH. INTRODUCTION , 1973 .

[167]  Erwin van der Laan,et al.  Leadtime effects and policy improvement for stochastic inventory control with remanufacturing , 2001 .

[168]  A. Spicer,et al.  Third-party demanufacturing as a solution for extended producer responsibility , 2004 .

[169]  D. Blumberg STRATEGIC EXAMINATION OF REVERSE LOGISTICS AND REPAIR SERVICE REQUIREMENTS, NEEDS, MARKET SIZE, AND OPPORTUNITIES , 1998 .

[170]  D. Lambert,et al.  Strategic Logistics Management , 1987 .

[171]  Maria Laura Mastellone,et al.  THE ENVIRONMENTAL PERFORMANCE OF ALTERNATIVE SOLID WASTE MANAGEMENT OPTIONS: A LIFE CYCLE ASSESSMENT STUDY , 2003 .

[172]  J. Quelch,et al.  A Strategic Approach to Managing Product Recalls , 1996 .

[173]  Markus Klausner,et al.  Reverse-Logistics Strategy for Product Take-Back , 2000, Interfaces.

[174]  K. Inderfurth,et al.  How to set the holding cost rates in average cost inventory models with reverse logistics , 2000 .

[175]  Gilvan C. Souza,et al.  Performance of static priority rules for shared facilities in a remanufacturing shop with disassembly and reassembly , 2005, Eur. J. Oper. Res..

[176]  J. D. Hess,et al.  Modeling merchandise returns in direct marketing , 1997 .

[177]  Simme Douwe Flapper,et al.  Product recovery in stochastic remanufacturing systems with multiple reuse options , 2001, Eur. J. Oper. Res..

[178]  W. J. Glantschnig,et al.  Green design: an introduction to issues and challenges , 1994 .

[179]  Laura Meade,et al.  A conceptual model for selecting and evaluating third‐party reverse logistics providers , 2002 .

[180]  Leo Kroon,et al.  Returnable containers: an example of reverse logistics , 1995 .

[181]  Rajesh Srivastava,et al.  Priority scheduling policies for repair shops , 2000 .

[182]  Marc Salomon,et al.  Strategic Issues in Product Recovery Management , 1995 .

[183]  Joseph Sarkis,et al.  An empirical evaluation of environmental efficiencies and firm performance: Pollution prevention versus end-of-pipe practice , 2001, Eur. J. Oper. Res..

[184]  André Langevin,et al.  Value Analysis and Optimization of Reusable Containers at Canada Post , 2000, Interfaces.

[185]  S. Minner Strategic safety stocks in reverse logistics supply chains , 2001 .

[186]  P. Daugherty,et al.  Reverse logistics: superior performance through focused resource commitments to information technology , 2005 .

[187]  Jonathan D. Linton,et al.  A Decision Support System for Planning Remanufacturing at Nortel Networks , 2000, Interfaces.

[188]  Frank B. Friedman,et al.  The changing role of the environmental manager , 1992 .

[189]  Kazuo Tanie,et al.  Concept of an autonomous disassembly system using behavior-based robotics , 1996, Adv. Robotics.

[190]  R. V. Hoek,et al.  From reversed logistics to green supply chains , 1999 .

[191]  Gp Gudrun Kiesmüller,et al.  An inventory model with dependent product demands and returns , 2001 .

[192]  M.B.M. deKoster,et al.  How to organise return handling; an exploratory study with nine retailer warehouses , 2002 .

[193]  Manoj Kumar Tiwari,et al.  Analyzing alternatives in reverse logistics for end-of-life computers: ANP and balanced scorecard approach , 2005, Comput. Ind. Eng..

[194]  Ronald S. Tibben-Lembke Life after death: reverse logistics and the product life cycle , 2002 .

[195]  James P. Warren,et al.  A Total Product System Concept , 2001 .

[196]  C. Hicksa,et al.  A functional model of supply chains and waste , 2004 .

[197]  C.S.A. van Koppen,et al.  Selecting Environmental Performance Indicators : The Case of Numico , 2001 .

[198]  Jim Browne,et al.  Towards a taxonomy of resource recovery from end-of-life products , 2000 .

[199]  Geraldo Ferrer On the widget remanufacturing operation , 2001, Eur. J. Oper. Res..

[200]  Thomas J. Goldsby,et al.  Using activity‐based costing to reengineer the reverse logistics channel , 2000 .

[201]  K. Richter The EOQ repair and waste disposal model with variable setup numbers , 1996 .

[202]  Ccile Scherpereel,et al.  Selecting Environmental Performance Indicators , 2001 .

[203]  Rudolf Kruse,et al.  Neuro-fuzzy approach to forecast returns of scrapped products to recycling and remanufacturing , 2002, Knowl. Based Syst..

[204]  Geraldo Ferrer,et al.  MATERIAL PLANNING FOR A REMANUFACTURING FACILITY , 2001 .

[205]  M. Fitzgerald,et al.  Horses for courses. , 2004, International journal of nursing practice.

[206]  Joseph Sarkis,et al.  Evaluating environmentally conscious business practices , 1998, Eur. J. Oper. Res..

[207]  Eric Masanet,et al.  Product recovery with some byte: an overview of management challenges and environmental consequences in reverse manufacturing for the computer industry , 2003 .

[208]  Ioannis Giannikos,et al.  A multiobjective programming model for locating treatment sites and routing hazardous wastes , 1998 .

[209]  Robert U. Ayres,et al.  Eco-efficiency, asset recovery and remanufacturing , 1997 .

[210]  P. Johnson,et al.  Managing value in reverse logistics systems , 1998 .

[211]  Kamalini Ramdas,et al.  Chain or Shackles: Understanding What Drives Supply-Chain Performance , 2000, Interfaces.

[212]  B. Burnes,et al.  The benefits of reverse logistics: The case of the Manchester Royal Infirmary Pharmacy , 2000 .

[213]  Alain Delchambre,et al.  Disassembly for recycling of office electronic equipment , 1997 .

[214]  Benita M. Beamon,et al.  Designing the green supply chain , 1999 .

[215]  Terrance Pohlen,et al.  Reverse Logistics in Plastics Recycling , 1992 .

[216]  G. Boothroyd,et al.  Design for Assembly and Disassembly , 1992 .

[217]  Carsten Nagel,et al.  Caught between ecology and economy: end-of-life aspects of environmentally conscious manufacturing , 1999 .

[218]  Diane A. Mollenkopf,et al.  The hidden value in reverse logistics , 2005 .

[219]  Jiuh-Biing Sheu,et al.  A REVERSE LOGISTICS COST MINIMIZATION MODEL FOR THE TREATMENT OF HAZARDOUS WASTES , 2002 .

[220]  Qinghua Zhu,et al.  Integrating Environmental Issues into Supplier Selection and Management , 2001 .