Electrochemical micro-drilling of deep holes by rotational cathode tools

In numerous non-conventional micro-machining, electrochemical micro-machining has merits such as high removal rate, leaving no residual stress and lower roughness on surfaces of machined products. It has been considered as a highly promising technology in micro-machining. Little research has been done on the deep-hole micro-drilling by electrochemical methods. This work utilizes a rotational system to extract insoluble sludge from a deep hole and reduce the difficulty of filling deep hole with electrolyte. As well as a rotational tool cathode, a pulsed power generator is used to support the intermittence machining to increase the precision of the workpiece. The influence of working parameters, such as pulsed on-times, applied voltages, electrolyte concentrations, pulsed frequencies, tool feeding rates, tool diameters, tool rotational rates, and hole depth, on the hole overcut and conicity in a electrochemical micro-drilling is investigated. A high quality micro-hole with a 33.35-µm overcut is drilled by a tungsten carbide pin of diameter 50 µm on a 304 stainless steel plate of thickness 1,000 µm. The hole aspect ratio (depth/diameter) reaches 8.6. It shows that a rotational tool can be utilized in the deep-hole electrochemical micro-drilling.

[1]  Shi Hyoung Ryu,et al.  Electro-chemical micro drilling using ultra short pulses , 2004 .

[2]  B. Bhattacharyya,et al.  Advancement in electrochemical micro-machining , 2004 .

[3]  Masayoshi Esashi,et al.  Microfabrication of thermoelectric materials by silicon molding process , 2003 .

[4]  Chyn-Shu Deng,et al.  Effects of support misalignments in deep-hole drill shafts on hole straightness , 2001 .

[5]  B. Bhattacharyya,et al.  Experimental investigation into electrochemical micromachining (EMM) process , 2003 .

[6]  Kamlakar P Rajurkar,et al.  Micro and Nano Machining by Electro-Physical and Chemical Processes , 2006 .

[7]  J. W. Schultze,et al.  The surface structure during pulsed ECM of iron in NaNO3 , 2005 .

[8]  Matthias Kock,et al.  Electrochemical micromachining with ultrashort voltage pulses–a versatile method with lithographical precision , 2003 .

[9]  B. Bhattacharyya,et al.  Experimental investigation on the influence of electrochemical machining parameters on machining rate and accuracy in micromachining domain , 2003 .

[10]  J. A. McGeough,et al.  Principles of electrochemical machining , 1974 .

[11]  C. R. Cho,et al.  A study of the characteristics for electrochemical micromachining with ultrashort voltage pulses , 2006 .

[12]  Mohan Sen,et al.  A review of electrochemical macro- to micro-hole drilling processes , 2005 .

[13]  Gerhard Ertl,et al.  Electrochemical machining of stainless steel microelements with ultrashort voltage pulses , 2001 .

[14]  Mitsuro Hattori,et al.  A study of three-dimensional shape machining with an ECμM system , 2006 .

[15]  B. Bhattacharyya,et al.  Control of micro-spark and stray-current effect during EMM process , 2007 .

[16]  Zheng Yunfei,et al.  Localized electrochemical micromachining with gap control , 2003 .

[17]  B. Bhattacharyya,et al.  Experimental study on electrochemical micromachining , 2005 .

[18]  Chong Nam Chu,et al.  The Effects of Tool Electrode Size on Characteristics of Micro Electrochemical Machining , 2006 .

[19]  B. Yan,et al.  Improvement of Electrochemical Microdrilling Accuracy Using Helical Tool , 2008 .