Rake face temperature when machining with coated cutting tools

Procedia Manufacturing is an open access journal focusing entirely on publishing high quality conference proceedings. Procedia Manufacturing enables fast dissemination of its content so that conference delegates can publish their papers in a dedicated online issue on Sciverse ScienceDirect under the Creative Commons license BY-NC-ND (for further details see our open access license policy.)

[1]  G. Han,et al.  Study of titanium nitride for low-e coating application , 2007 .

[2]  L. Dai,et al.  Suppression of repeated adiabatic shear banding by dynamic large strain extrusion machining , 2014 .

[3]  G. Boothroyd.  Temperatures in Orthogonal Metal Cutting , 1963 .

[4]  M. Cemal Cakir,et al.  Thermocouple and Infrared Sensor-Based Measurement of Temperature Distribution in Metal Cutting , 2015, Sensors.

[5]  Thejas Menon.  Full-field infrared thermography at tool-chip interface through transparent cutting tool while machining TI-6AL-4V , 2013 .

[6]  V. Madhavan,et al.  Infrared Thermography of the Chip-Tool Interface through Transparent Cutting Tools | NIST , 2014 .

[7]  S. Wada,et al.  Thermal conductivity/diffusivity of Nd3+ doped GdVO4, YVO4, LuVO4, and Y3Al5O12 by temperature wave analysis , 2008 .

[8]  Hugh O. Pierson,et al.  Handbook of Refractory Carbides and Nitrides: Properties, Characteristics, Processing and Applications , 1996 .

[9]  E. Trent,et al.  Temperature distribution in tools used for cutting iron, titanium and nickel , 1975 .

[10]  M. Lahres,et al.  Quantitative measurement of temperatures on diamond-coated tools during machining , 1995 .

[11]  S. Carvalho,et al.  Improving the visible transmittance of low-e titanium nitride based coatings for solar thermal applications , 2011 .

[12]  F. Schilling,et al.  Single-crystal elastic properties of (Y,Yb)3Al5O12 , 2009 .

[13]  V. C. Raj,et al.  Measurement of surface temperature and emissivity of different materials by two-colour pyrometry. , 2013, Review of Scientific Instruments.

[14]  T. Kitagawa,et al.  Temperature and wear of cutting tools in high-speed machining of Inconel 718 and Ti6Al6V2Sn , 1997 .

[15]  Guy Sutter,et al.  Temperature fields in a chip during high-speed orthogonal cutting—An experimental investigation , 2007 .

[16]  G. Greene,et al.  Total hemispherical emissivity of oxidized Inconel 718 in the temperature range 300-1000°C , 2000 .

[17]  Infrared temperature measurement on diamond-coated tools during machining , 1994 .

[18]  J. H. Dautzenberg,et al.  Temperature measurement in orthogonal metal cutting , 1998 .

[19]  Brandon M. Lane,et al.  Uncertainty of temperature measurements by infrared thermography for metal cutting applications , 2013 .

[20]  R. Komanduri,et al.  A review of the experimental techniques for the measurement of heat and temperatures generated in some manufacturing processes and tribology , 2001 .

[21]  Mark R. Miller,et al.  Experimental Cutting Tool Temperature Distributions , 2003 .

[22]  E. M. Trent,et al.  Metallurgical appraisal of wear mechanisms and processes on high-speed-steel cutting tools , 1974 .

[23]  Xiaoshuang Chen,et al.  Control of optical properties of TiN_xO_y films and application for high performance solar selective absorbing coatings , 2014 .

[24]  E. G. Herbert.  The Measurement of Cutting Temperatures , 1926 .

[25]  Tony L. Schmitz,et al.  Calibrated Thermal Microscopy of the Tool–Chip Interface in Machining , 2000 .