Dynamic Photomask‐Assisted Direct Ink Writing Multimaterial for Multilevel Triboelectric Nanogenerator

[1]  A. Studart,et al.  3D Printing of Materials with Tunable Failure via Bioinspired Mechanical Gradients , 2018, Advanced materials.

[2]  Kyung Hyun Choi,et al.  In situ UV curable 3D printing of multi-material tri-legged soft bot with spider mimicked multi-step forward dynamic gait , 2016 .

[3]  Conner K. Dunn,et al.  Thermomechanically Triggered Two‐Stage Pattern Switching of 2D Lattices for Adaptive Structures , 2018 .

[4]  Zhong Lin Wang.  On Maxwell's displacement current for energy and sensors: the origin of nanogenerators , 2017 .

[5]  Mohammad Talha,et al.  Recent development in modeling and analysis of functionally graded materials and structures , 2015 .

[6]  Devis Bellucci,et al.  Functionally graded materials for orthopedic applications - an update on design and manufacturing. , 2016, Biotechnology advances.

[7]  G. Kang,et al.  Fabrication of tough epoxy with shape memory effects by UV-assisted direct-ink write printing. , 2018, Soft matter.

[8]  G. Griffini,et al.  3D-printable CFR polymer composites with dual-cure sequential IPNs , 2016 .

[9]  Martin L. Dunn,et al.  Sequential Self-Folding Structures by 3D Printed Digital Shape Memory Polymers , 2015, Scientific Reports.

[10]  Dujing Wang,et al.  Triple-shape memory epoxy based on Diels–Alder adduct molecular switch , 2016 .

[11]  Zhong Lin Wang,et al.  Triboelectrification based motion sensor for human-machine interfacing. , 2014, ACS applied materials & interfaces.

[12]  Craig M. Hamel,et al.  Cellulose nanocrystals support material for 3D printing complexly shaped structures via multi-materials-multi-methods printing , 2019, Additive Manufacturing.

[13]  Mark A. Skylar-Scott,et al.  Laser-assisted direct ink writing of planar and 3D metal architectures , 2016, Proceedings of the National Academy of Sciences.

[14]  Jun Chen,et al.  Shape Memory Polymers for Body Motion Energy Harvesting and Self‐Powered Mechanosensing , 2018, Advanced materials.

[15]  N. Fang,et al.  Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion. , 2016, Physical review letters.

[16]  Manuel Schaffner,et al.  3D printing of robotic soft actuators with programmable bioinspired architectures , 2018, Nature Communications.

[17]  D. Briand,et al.  Self-powered triboelectric touch sensor made of 3D printed materials , 2018, Nano Energy.

[18]  Jiangtao Wu,et al.  3D Printing of Highly Stretchable, Shape-Memory, and Self-Healing Elastomer toward Novel 4D Printing. , 2018, ACS applied materials & interfaces.

[19]  Daining Fang,et al.  Grayscale digital light processing 3D printing for highly functionally graded materials , 2019, Science Advances.

[20]  T. Xie.  Tunable polymer multi-shape memory effect , 2010, Nature.

[21]  Zhong Lin Wang.  Entropy theory of distributed energy for internet of things , 2019, Nano Energy.

[22]  André R Studart,et al.  Composites Reinforced in Three Dimensions by Using Low Magnetic Fields , 2012, Science.

[23]  Zhong Lin Wang,et al.  Triboelectric nanogenerator as self-powered active sensors for detecting liquid/gaseous water/ethanol , 2013 .

[24]  Caofeng Pan,et al.  Self‐Powered Tactile Sensor Array Systems Based on the Triboelectric Effect , 2018, Advanced Functional Materials.

[25]  Jianhua Hao,et al.  Fully self-healing and shape-tailorable triboelectric nanogenerators based on healable polymer and magnetic-assisted electrode , 2017 .

[26]  Martin L. Dunn,et al.  Recyclable 3D printing of vitrimer epoxy , 2017 .

[27]  Simiao Niu,et al.  Nanometer Resolution Self‐Powered Static and Dynamic Motion Sensor Based on Micro‐Grated Triboelectrification , 2014, Advanced materials.

[28]  Jiangtao Wu,et al.  Three-Dimensional-Printed Multistable Mechanical Metamaterials With a Deterministic Deformation Sequence , 2017 .

[29]  Lei Zhang,et al.  Stretchable Porous Carbon Nanotube‐Elastomer Hybrid Nanocomposite for Harvesting Mechanical Energy , 2017, Advanced materials.

[30]  C. Hawker,et al.  Solution Mask Liquid Lithography (SMaLL) for One‐Step, Multimaterial 3D Printing , 2018, Advanced materials.

[31]  Andrew J Boydston,et al.  Multimaterial actinic spatial control 3D and 4D printing , 2019, Nature Communications.

[32]  Jun Chen,et al.  Harmonic‐Resonator‐Based Triboelectric Nanogenerator as a Sustainable Power Source and a Self‐Powered Active Vibration Sensor , 2013, Advanced materials.

[33]  Markus J. Buehler,et al.  Advanced Structural Materials by Bioinspiration   , 2017 .

[34]  Daining Fang,et al.  High-Speed 3D Printing of High-Performance Thermosetting Polymers via Two-Stage Curing. , 2018, Macromolecular rapid communications.

[35]  Zhong Lin Wang,et al.  Human skin based triboelectric nanogenerators for harvesting biomechanical energy and as self-powered active tactile sensor system. , 2013, ACS nano.

[36]  Jizhou Song,et al.  Ultrafast Digital Printing toward 4D Shape Changing Materials , 2017, Advanced materials.

[37]  Jin-Woo Han,et al.  All-printed triboelectric nanogenerator , 2018 .

[38]  H. Le Ferrand,et al.  Magnetically assisted slip casting of bioinspired heterogeneous composites. , 2015, Nature materials.

[39]  Thomas J Ober,et al.  Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks , 2015, Advanced materials.

[40]  Minoo Naebe,et al.  Functionally graded materials: A review of fabrication and properties , 2016 .

[41]  Martin L. Dunn,et al.  Thermal cure effects on electromechanical properties of conductive wires by direct ink write for 4D printing and soft machines , 2017 .

[42]  A. Studart,et al.  Multimaterial magnetically assisted 3D printing of composite materials , 2015, Nature Communications.

[43]  J. A. Lewis.  Direct Ink Writing of 3D Functional Materials , 2006 .

[44]  R. Hutchinson,et al.  Free‐Radical Acrylic Polymerization Kinetics at Elevated Temperatures , 2010 .

[45]  Glaucio H. Paulino,et al.  Programmable Deployment of Tensegrity Structures by Stimulus-Responsive Polymers , 2017, Scientific Reports.

[46]  Robert J. Wood,et al.  An integrated design and fabrication strategy for entirely soft, autonomous robots , 2016, Nature.

[47]  Lijie Sun,et al.  A Single Integrated 3D‐Printing Process Customizes Elastic and Sustainable Triboelectric Nanogenerators for Wearable Electronics , 2018, Advanced Functional Materials.

[48]  Ralph G Nuzzo,et al.  Programming Mechanical and Physicochemical Properties of 3D Hydrogel Cellular Microcultures via Direct Ink Writing , 2016, Advanced healthcare materials.

[49]  Marc Behl,et al.  Reversible Triple‐Shape Effect of Polymer Networks Containing Polypentadecalactone‐ and Poly(ε‐caprolactone)‐Segments , 2010, Advanced materials.

[50]  Lei Zhang,et al.  Multifunctional triboelectric nanogenerator based on porous micro-nickel foam to harvest mechanical energy , 2015 .

[51]  Ying-Chih Lai,et al.  Vitrimer Elastomer‐Based Jigsaw Puzzle‐Like Healable Triboelectric Nanogenerator for Self‐Powered Wearable Electronics , 2018, Advanced materials.

[52]  J. Lewis,et al.  3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.

[53]  Mir Jalil Razavi,et al.  4D Origami by Smart Embroidery. , 2017, Macromolecular rapid communications.

[54]  André R Studart,et al.  Additive manufacturing of biologically-inspired materials. , 2016, Chemical Society reviews.

[55]  Zhong Lin Wang,et al.  Ultrathin, rollable, paper-based triboelectric nanogenerator for acoustic energy harvesting and self-powered sound recording. , 2015, ACS nano.

[56]  A. Bandodkar,et al.  Advanced Materials for Printed Wearable Electrochemical Devices: A Review , 2017 .

[57]  Craig M. Hamel,et al.  3D printed two-dimensional periodic structures with tailored in-plane dynamic responses and fracture behaviors , 2018 .

[58]  G. Zhu,et al.  A Shape‐Adaptive Thin‐Film‐Based Approach for 50% High‐Efficiency Energy Generation Through Micro‐Grating Sliding Electrification , 2014, Advanced materials.

[59]  J. Lewis,et al.  Architected cellular ceramics with tailored stiffness via direct foam writing , 2017, Proceedings of the National Academy of Sciences.