Fabrication of Al2O3-ZrO2-Ni composites with improved toughness using nano powders prepared by mechanical alloying

[1]  B. P. Saha,et al.  Effect of porosity on the structure and properties of β-SiAlON ceramics , 2019, Journal of Alloys and Compounds.

[2]  Xiaohui Yan,et al.  Microstructure and mechanical properties of FeCoCrNiMnAlx high-entropy alloys prepared by mechanical alloying and hot-pressed sintering , 2019, Journal of Alloys and Compounds.

[3]  Wen He,et al.  Study on the growth kinetics of Al2O3 columnar crystal in Al2O3 matrix composite ceramics prepared by microwave sintering , 2019, Journal of Crystal Growth.

[4]  A. Prosviryakov,et al.  Low-Cost Mechanically Alloyed Copper-Based Composite Reinforced with Silicate Glass Particles for Thermal Applications , 2018, JOM.

[5]  M. Ibrahim,et al.  In vitro bioactivity, physical and mechanical properties of carbonated-fluoroapatite during mechanochemical synthesis , 2018, Ceramics International.

[6]  C. Tseng,et al.  Microwave dielectric properties of Li2W2O7 ceramics improved by Al2O3 addition , 2018, Journal of Alloys and Compounds.

[7]  Ying Chen,et al.  Enhanced dielectric breakdown strength in Ni2O3 modified Al2O3-SiO2-TiO2 based dielectric ceramics , 2018, Journal of the European Ceramic Society.

[8]  N. Lupu,et al.  Synthesis and characterisation of Al2O3/Ni-type composites obtained by spark plasma sintering , 2018 .

[9]  M. Taha,et al.  Mechanical properties, in vitro and in vivo bioactivity assessment of Na 2 O-CaO-P 2 O 5 -B 2 O 3 -SiO 2 glass-ceramics , 2018 .

[10]  M. Alini,et al.  Human primary osteoblast behaviour on microrough zirconia-toughened alumina and on selectively etched microrough zirconia-toughened alumina , 2018 .

[11]  M. Zawrah,et al.  Mechanical Alloying and Sintering of a Ni/10wt.%Al2O3 Nanocomposite and its Characterization , 2018, Silicon.

[12]  M. Ibrahim,et al.  Effect of sintering temperatures on the in vitro bioactivity, molecular structure and mechanical properties of titanium/carbonated hydroxyapatite nanobiocomposites , 2017 .

[13]  H. Ryu,et al.  Thermal conductivity of Mo-reinforced ZrO2 composites fabricated by spark plasma sintering for inert matrix fuels , 2017 .

[14]  M. Zawrah,et al.  Effect of nano ZrO2 on strengthening and electrical properties of Cu-matrix nanocomposits prepared by mechanical alloying , 2017 .

[15]  M. Ibrahim,et al.  Molecular modeling, FTIR spectral characterization and mechanical properties of carbonated-hydroxyapatite prepared by mechanochemical synthesis , 2017 .

[16]  M. Zawrah,et al.  Improvement of wetability, sinterability, mechanical and electrical properties of Al2O3-Ni nanocomposites prepared by mechanical alloying , 2017 .

[17]  Y. Chai,et al.  Sintering temperature dependence of low-cost, low-density ceramic proppant with high breakage resistance , 2016 .

[18]  M. Zawrah,et al.  Effect of milling parameters on sinterability, mechanical and electrical properties of Cu-4 wt.% ZrO2 nanocomposite , 2016 .

[19]  K. Singh,et al.  Effect of sintering temperature on the microstructural, dielectric, ferroelectric and piezoelectric properties of (Na0.5K0.5)NbO3 ceramics prepared from nanoscale powders , 2016 .

[20]  Y. Tür,et al.  Pressureless sintering of Al2O3/Ni nanocomposites produced by heterogeneous precipitation method with varying nickel contents , 2016 .

[21]  J. Zygmuntowicz,et al.  ZrO2-Ni composites : properties and characterization , 2016 .

[22]  A. José,et al.  Effect of Particle Size and Titanium Content on the Fracture Toughness of Particle-Ceramic Composites☆ , 2016 .

[23]  J. M. Lopes,et al.  Chemical synthesis and characterization of Nb–ZrO2 , 2016 .

[24]  Jiazhen Yan,et al.  Effects of brazing temperature on microstructure and mechanical performance of Al2O3/AgCuTi/Fe–Ni–Co brazed joints , 2015 .

[25]  Casey R. Thurber,et al.  Synthesis of Nickel and Nickel Hydroxide Nanopowders by Simplified Chemical Reduction , 2014 .

[26]  T. Goto,et al.  Spark plasma sintering of Al2O3–Ni nanocomposites using Ni nanoparticles produced by rotary chemical vapour deposition , 2014 .

[27]  A. Smirnov,et al.  Microstructure and mechanical properties of ZrO2 ceramics toughened by 5–20 vol% Ta metallic particles fabricated by pressureless sintering , 2014 .

[28]  M. Zawrah,et al.  Mechanical alloying, sintering and characterization of Al2O3–20 wt%–Cu nanocomposite , 2014 .

[29]  M. Zawrah,et al.  Preparation by mechanical alloying, characterization and sintering of Cu–20 wt.% Al2O3 nanocomposites , 2013 .

[30]  M. Yusoff,et al.  Effect of Sintering Parameters on Microstructure and Properties of Mechanically Alloyed Copper-Tungsten Carbide Composite , 2013 .

[31]  F. Oliveira,et al.  Fracture Toughness of Dense Cordierite: Sintering Cycle Effect , 2012 .

[32]  M. Zawrah,et al.  Fabrication of Al2O3–20 vol.% Al nanocomposite powders using high energy milling and their sinterability , 2012 .

[33]  M. Lastusaari,et al.  Influence of titanium and lutetium on the persistent luminescence of ZrO_2 , 2012 .

[34]  M. Zawrah,et al.  Synthesis of carbon-free Si3N4/SiC nanopowders using silica fume , 2011 .

[35]  D. Božić,et al.  Effects of copper and Al2O3 particles on characteristics of Cu–Al2O3 composites , 2010 .

[36]  Jow-Lay Huang,et al.  Processing and physical properties of Al2O3/aluminum alloy composites , 2009 .

[37]  M. Zawrah,et al.  In situ formation of zirconia–alumina–spinel–mullite ceramic composites , 2008 .

[38]  Mahmoud F. Zawrah,et al.  Mechanical properties of SiC ceramics by ultrasonic nondestructive technique and its bioactivity , 2007 .

[39]  M. Nygren,et al.  Diamond‐like Hardening of Alumina/Ni Nanocomposites , 2007 .

[40]  朱冬梅,et al.  Mechanical and dielectric properties of Ni/Al2O3 composites , 2007 .

[41]  Dae-gun Kim,et al.  Sintering characteristic of Al2O3-reinforced 2xxx series Al composite powders , 2005 .

[42]  M. Zawrah,et al.  Densification and properties of glass/cordierite composites , 2005 .

[43]  Jing-kun Guo,et al.  Microstructure and mechanical properties of Al2O3/Ni composites , 2004 .

[44]  M. Zawrah,et al.  Microstructure and hardness of nanostructured Al–Fe–Cr–Ti alloys through mechanical alloying , 2003 .

[45]  R. Chen,et al.  Oxidation resistance of Ni-toughened Al2O3 , 2003 .

[46]  O. Sbaizero,et al.  Electrical conductivity of an insulator matrix (alumina) and conductor particle (molybdenum) composites , 2003 .

[47]  J. Moya,et al.  Zirconia/stainless-steel continuous functionally graded material , 2002 .

[48]  J. Schneider,et al.  Microstructure and mechanical characteristics of laser-alloyed alumina ceramics , 2002 .

[49]  F. Feret,et al.  Determination of alpha and beta alumina in ceramic alumina by X-ray diffraction , 2000 .

[50]  A. Malliaris,et al.  Influence of Particle Size on the Electrical Resistivity of Compacted Mixtures of Polymeric and Metallic Powders , 1971 .