An investigation of volute cross-sectional shape on turbocharger turbine under pulsating conditions in internal combustion engine

Engine downsizing is a proven method for CO2 reduction in Internal Combustion Engine (ICE). A turbocharger, which reclaims the energy from the exhaust gas to boost the intake air, can effectively improve the power density of the engine thus is one of the key enablers to achieve the engine downsizing. Acknowledging its importance, many research efforts have gone into improving a turbocharger performance, which includes turbine volute. The cross-section design of a turbine volute in a turbocharger is usually a compromise between the engine level packaging and desired performance. Thus, it is beneficial to evaluate the effects of cross-sectional shape on a turbine performance. This paper presents experimental and computational investigation of the influence of volute cross-sectional shape on the performance of a radial turbocharger turbine under pulsating conditions. The cross-sectional shape of the baseline volute (denoted as Volute B) was optimized (Volute A) while the annulus distribution of area-to-radius ratio (A/R) for the two volute configurations are kept the same. Experimental results show that the turbine with the optimized volute A has better cycle averaged efficiency under pulsating flow conditions, for different loadings and frequencies. The advantage of performance is influenced by the operational conditions. After the experiment, a validated unsteady computational fluid dynamics (CFD) modeling was employed to investigate the mechanism by which performance differs between the baseline volute and the optimized version. Computational results show a stronger flow distortion in spanwise direction at the rotor inlet with the baseline volute. Furthermore, compared with the optimized volute, the flow distortion is more sensitive to the pulsating flow conditions in the baseline volute. This is due to the different secondary flow pattern in the cross-sections, hence demonstrating a direction for desired volute cross-sectional shape to be used in a turbocharger radial turbine for internal combustion engine.

[1]  A Whitfield,et al.  Design and Performance of Vaneless Volutes for Radial Inflow Turbines: Part 2: Experimental Investigation of the Mean Line Performance—Assessment of Empirical Design Parameters , 1994 .

[2]  I Hakeem,et al.  Effect of volute geometry on the steady and unsteady performance of mixed-flow turbines , 2007 .

[3]  Srithar Rajoo,et al.  Variable Geometry Mixed Flow Turbine for Turbochargers: An Experimental Study , 2008 .

[4]  A Whitfield,et al.  Design and Performance of Vaneless Volutes for Radial Inflow Turbines: Part 1: Non-Dimensional Conceptual Design Considerations , 1994 .

[5]  Abraham Engeda,et al.  A comparative study of incompressible and compressible design approaches of radial inflow turbine volutes , 2001 .

[6]  Miloud Abidat,et al.  Design and flow analysis of radial and mixed flow turbine volutes , 2006 .

[7]  A Whitfield,et al.  Design and Performance of Vaneless Volutes for Radial Inflow Turbines: Part 3: Experimental Investigation of the Internal Flow Structure , 1994 .

[8]  H Chen,et al.  Design Methods of Volute Casings for Turbocharger Turbine Applications , 1996 .

[10]  Srithar Rajoo,et al.  Integration of meanline and one-dimensional methods for prediction of pulsating performance of a turbocharger turbine , 2014 .

[11]  Dieter Peitsch,et al.  On the Effect of Volute Tongue Design on Radial Turbine Performance , 2012 .

[12]  Luis Miguel García-Cuevas,et al.  Development and validation of a radial variable geometry turbine model for transient pulsating flow applications , 2014 .

[13]  Ricardo Martinez-Botas,et al.  The development of a dynamometer for torque measurement of automotive turbocharger turbines , 2007 .

[14]  R. A. Van den Braembussche,et al.  Experimental and Theoretical Analysis of the Flow in a Centrifugal Compressor Volute , 1992 .

[15]  Ricardo Martinez-Botas,et al.  A comparison of timescales within a pulsed flow turbocharger turbine , 2012 .

[16]  Hua Chen.  A Discussion on Volute Design Method for Radial Inflow Turbines , 2009 .

[17]  P. M. Chappie,et al.  Aerodynamic Design of Fixed and Variable Geometry Nozzleless Turbine Casings , 1980 .

[18]  I. Gyobu,et al.  Performance Investigations of Large Capacity Centrifugal Compressors , 1978 .

[19]  F. S. Bhinder,et al.  Paper 21: Investigation of Flow in the Nozzle-Less Spiral Casing of a Radial Inward-Flow Gas Turbine , 1969 .

[20]  Gequn Shu,et al.  Gasoline engine exhaust gas recirculation – A review , 2012 .