Analytical effective elastic properties of particulate composites with soft interfaces around anisotropic particles

Abstract Understanding the effects of interfacial properties on effective elastic properties is of great importance in materials science and engineering. In this work, we propose a theoretical framework to predict the effective moduli of three-phase heterogeneous particulate composites containing spheroidal particles, soft interfaces, and a homogeneous matrix. We first derive the effective moduli of two-phase representative volume elements (RVEs) with matrix and spheroidal inclusions using the variational principle. Subsequently, an analytical model considering the volume fraction of soft interfaces around spheroidal particles is presented. The effective moduli of such three-phase particulate composites are eventually derived by the generalized self-consistent scheme. These theoretical schemes are compared with experimental studies, numerical simulations, and theoretical approximations reported in the literature to verify their validity. We further investigate the dependence of the effective elastic modulus on the interfacial properties and the geometric characteristics of anisotropic particles based on the proposed theoretical framework. Results show that the interfacial volume fraction and the effective elastic modulus of particulate composites are strongly dependent on the aspect ratio, geometric size factor, volume fraction, and particle size distribution of ellipsoidal particles.

[1]  Linhua Jiang,et al.  Prediction of transport behaviors of particulate composites considering microstructures of soft interfacial layers around ellipsoidal aggregate particles. , 2014, Soft matter.

[2]  R. Newnham,et al.  Electrical Resistivity of Composites , 1990 .

[3]  Huisu Chen,et al.  Analytical and modeling investigations of volume fraction of interfacial layers around ellipsoidal aggregate particles in multiphase materials , 2012 .

[4]  J. Willis.  Bounds and self-consistent estimates for the overall properties of anisotropic composites , 1977 .

[5]  N. Pan,et al.  Predictions of effective physical properties of complex multiphase materials , 2008 .

[6]  Ping Sheng,et al.  A generalized differential effective medium theory , 1985 .

[7]  C. C. Yang.  Effect of the Transition Zone on the Elastic Moduli of Mortar , 1998 .

[8]  K. Scrivener,et al.  The Interfacial Transition Zone (ITZ) Between Cement Paste and Aggregate in Concrete , 2004 .

[9]  Hernán A Makse,et al.  Mean-field theory of random close packings of axisymmetric particles , 2013, Nature Communications.

[10]  Salvatore Torquato,et al.  Effective stiffness tensor of composite media—I. Exact series expansions , 1997 .

[11]  Wenxiang Xu,et al.  Modeling of soft interfacial volume fraction in composite materials with complex convex particles. , 2014, The Journal of chemical physics.

[12]  Edward J. Garboczi,et al.  Multiscale Analytical/Numerical Theory of the Diffusivity of Concrete , 1998 .

[13]  A. F. Stock,et al.  THE EFFECT OF AGGREGATE CONCENTRATION UPON THE STRENGTH AND MODULUS OF ELASTICITY OF CONCRETE , 1979 .

[14]  F. Stillinger,et al.  Improving the Density of Jammed Disordered Packings Using Ellipsoids , 2004, Science.

[15]  R. Hill.  A self-consistent mechanics of composite materials , 1965 .

[16]  Zvi Hashin,et al.  Thermoelastic properties of particulate composites with imperfect interface , 1991 .

[17]  R. Christensen,et al.  Solutions for effective shear properties in three phase sphere and cylinder models , 1979 .

[18]  Yang Shen,et al.  Interfacial Effect on Dielectric Properties of Polymer Nanocomposites Filled with Core/Shell‐Structured Particles , 2007 .

[19]  S. Torquato,et al.  Random Heterogeneous Materials: Microstructure and Macroscopic Properties , 2005 .

[20]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[21]  Linbing Wang,et al.  Unified Method to Quantify Aggregate Shape Angularity and Texture Using Fourier Analysis , 2005 .

[22]  W. F. Chen,et al.  Effect of transition zone on elastic moduli of concrete materials , 1996 .

[23]  David J. Corr,et al.  Experimental study of the interfacial transition zone (ITZ) of model rock-filled concrete (RFC) , 2015 .

[24]  Aibing Yu,et al.  Dynamic Simulation of the Packing of Ellipsoidal Particles , 2011 .

[25]  Huiling Duan,et al.  A unified scheme for prediction of effective moduli of multiphase composites with interface effects. Part I: Theoretical framework , 2007 .

[26]  Stephen L. Alexander,et al.  Modeling the Thermoviscoelastic Properties and Recovery Behavior of Shape Memory Polymer Composites , 2014 .

[27]  Y. Mai,et al.  Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites , 2008 .

[28]  J. Willis,et al.  The effect of spatial distribution on the effective behavior of composite materials and cracked media , 1995 .

[29]  Zongjin Li,et al.  Multi-Aggregate Approach for Modeling Interfacial Transition Zone in Concrete , 2014 .

[30]  Bhushan Lal Karihaloo,et al.  Effective conductivities of heterogeneous media containing multiple inclusions with various spatial distributions , 2006 .

[31]  Jinxi Liu,et al.  Dynamic effective shear modulus of nanocomposites containing randomly distributed elliptical nano-fibers with interface effect , 2013 .

[32]  S. Shtrikman,et al.  A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Materials , 1962 .

[33]  S. Torquato,et al.  Nearest-surface distribution functions for polydispersed particle systems. , 1992, Physical review. A, Atomic, molecular, and optical physics.

[34]  Ch. Zhang,et al.  Micro-scaled size-dependence of the effective properties of 0–3 PZT–cement composites: Experiments and modeling , 2014 .

[35]  Wen Chen,et al.  Strategy for interfacial overlapping degree in multiphase materials with complex convex particles , 2015 .

[36]  Y. Benveniste.  Exact results for the local fields and the effective moduli of fibrous composites with thickly coated fibers , 2014 .