Periodic pulse reverse plating achieve high throwing power of high aspect ratio electronic interconnection: simulation and experiments

[1]  Yang Peng,et al.  Electrochemical behaviors of additives in high Cu(II) concentration solution for high-aspect-ratio through ceramic holes filling , 2021, Materials Today Communications.

[2]  Yang Cheng,et al.  A Wideband PCB-Stacked Air-Filled Luneburg Lens Antenna for 5G Millimeter-Wave Applications , 2021, IEEE Antennas and Wireless Propagation Letters.

[3]  Jin-qiu Zhang,et al.  Screening of electroplating additive for improving throwing power of copper pyrophosphate bath via molecular dynamics simulation , 2020 .

[4]  Ying Tao,et al.  Temperature-dependent inhibition of PEG in acid copper plating: Theoretical analysis and experiment evidence , 2020 .

[5]  S. Gendt,et al.  Hydroquinone oriented growth control to achieve high-quality copper coating at high rate for electronics interconnection , 2020 .

[6]  Fuliang Wang.  Bis-(3-sulfopropyl) Disulfide Acceleration of Copper Electrodeposition via Molecular Dynamics and Quantum Chemical Calculations , 2020 .

[7]  Quanyong Wang,et al.  Copolymer of Pyrrole and 1,4-Butanediol Diglycidyl as an Efficient Additive Leveler for Through-Hole Copper Electroplating , 2020, ACS omega.

[8]  P. Korzhavyi,et al.  Hydrogen sorption capacity of crystal lattice defects and low Miller index surfaces of copper , 2020, Journal of Materials Science.

[9]  Liping Wang,et al.  Understanding the adsorption and anticorrosive mechanism of DNA inhibitor for copper in sulfuric acid , 2019, Applied Surface Science.

[10]  N. Xiao,et al.  Special electrochemical behaviour of sodium thiazolinyl-dithiopropane sulphonate during microvia filling , 2019, Transactions of the IMF.

[11]  C. Yang,et al.  Effect of pulse-reverse plating on copper: Thermal mechanical properties and microstructure relationship , 2019, Microelectronics Reliability.

[12]  Hugo Bender,et al.  Copper Plating for 3D Interconnects , 2010, ECS Transactions.

[13]  Y. Qiang,et al.  Effects of 2,2-Dithiodipyridine as a Leveler for Through-Holes Filling by Copper Electroplating , 2019, Journal of The Electrochemical Society.

[14]  John L. Volakis,et al.  Ultra-Wideband Phased Array for Millimeter-Wave ISM and 5G Bands, Realized in PCB , 2018, IEEE Transactions on Antennas and Propagation.

[15]  Quanxi Zhu,et al.  Effect of Reverse Pulse on Additives Adsorption and Copper Filling for Through Silicon Via , 2018, Journal of The Electrochemical Society.

[16]  Huaiwu Zhang,et al.  Computational analysis and experimental evidence of two typical levelers for acid copper electroplating , 2018 .

[17]  Huaiwu Zhang,et al.  Electrochemical Factors of Levelers on Plating Uniformity of Through-Holes: Simulation and Experiments , 2018 .

[18]  M. Bakir,et al.  Fabrication and electrical characterization of sub-micron diameter through-silicon via for heterogeneous three-dimensional integrated circuits , 2017 .

[19]  Wei-Ping Dow,et al.  Effects of Brighteners in a Copper Plating Bath on Throwing Power and Thermal Reliability of Plated Through Holes , 2016 .

[20]  I. O. Wallinder,et al.  Synergistic effects of gelatin and convection on copper foil electrodeposition , 2016 .

[21]  John U. Knickerbocker,et al.  An overview of through-silicon-via technology and manufacturing challenges , 2015 .

[22]  M. Moshrefi-Torbati,et al.  Plating Uniformity of Bottom-up Copper Pillars and Patterns for IC Substrates with Additive-assisted Electrodeposition , 2014 .

[23]  Ryutaro Maeda,et al.  Void-Free Copper Filling of Through Silicon Via by Periodic Pulse Reverse Electrodeposition , 2014 .

[24]  Peixia Yang,et al.  Electrochemical behaviors of Janus Green B in through-hole copper electroplating: An insight by experiment and density functional theory calculation using Safranine T as a comparison , 2013 .

[25]  An-Hong Liu,et al.  Periodic Pulse Reverse Cu Plating for Through-Hole Filling , 2013 .

[26]  Jin-qiu Zhang,et al.  Through-Hole Filling by Copper Electroplating Using Sodium Thiazolinyl-Dithiopropane Sulfonate as the Single Additive , 2012 .

[27]  A. West,et al.  Interaction between SPS and MPS in the Presence of Ferrous and Ferric Ions , 2011 .

[28]  Q. Li,et al.  Role of SPS in chloride ions and PEG additive system for copper electrocrystallisation , 2010 .

[29]  Yu-Chen Chang,et al.  Rapid Galvanostatic Determination on Levelers for Superfilling in Cu Electroplating , 2010 .

[30]  Wei-Ping Dow,et al.  Microvia filling by copper electroplating using diazine black as a leveler , 2009 .

[31]  Mark J. Willey,et al.  Acceleration Kinetics of PEG, PPG, and a Triblock Copolymer by SPS during Copper Electroplating , 2009 .

[32]  Wei-Ping Dow,et al.  Microvia Filling by Cu Electroplating Over a Au Seed Layer Modified by a Disulfide , 2009 .

[33]  Wei-Ping Dow,et al.  Enhancement of filling performance of a copper plating formula at low chloride concentration , 2008 .

[34]  J. Harb,et al.  The Role of SPS, MPSA, and Chloride in Additive Systems for Copper Electrodeposition , 2007 .

[35]  Cheng-Wei Chou,et al.  Practical monitoring of filling performance in a copper plating bath , 2006 .

[36]  Wei-Ping Dow,et al.  Evaluating the Filling Performance of a Copper Plating Formula Using a Simple Galvanostat Method , 2006 .

[37]  Wei-Ping Dow,et al.  Influence of convection-dependent adsorption of additives on microvia filling by copper electroplating , 2005 .

[38]  M. Aroyo,et al.  Pulse periodic reverse plating: New possibilities for electrodeposition of metal coatings with improved properties: Part 1 , 2002 .