An integrated full-field model of concurrent plastic deformation and microstructure evolution: Application to 3D simulation of dynamic recrystallization in polycrystalline copper

Abstract Many time-dependent deformation processes at elevated temperatures produce significant concurrent microstructure changes that can alter the mechanical properties in a profound manner. Such microstructure evolution is usually absent in mesoscale deformation models and simulations. Here we present an integrated full-field modeling scheme that couples the mechanical response with the underlying microstructure evolution. As a first demonstration, we integrate a fast Fourier transform-based elasto-viscoplastic (FFT-EVP) model with a phase-field (PF) recrystallization model, and carry out three-dimensional simulations of dynamic recrystallization (DRX) in polycrystalline copper. A physics-based coupling between FFT-EVP and PF is achieved by (1) adopting a dislocation-based constitutive model in FFT-EVP, which allows the predicted dislocation density distribution to be converted to a stored energy distribution and passed to PF, and (2) implementing a stochastic nucleation model for DRX. Calibrated with the experimental DRX stress–strain curves, the integrated model is able to deliver full-field mechanical and microstructural information, from which quantitative description and analysis of DRX can be achieved. It is suggested that the initiation of DRX occurs significantly earlier than previous predictions, due to heterogeneous deformation. DRX grains are revealed to form at both grain boundaries and junctions (e.g., quadruple junctions) and tend to grow in a wedge-like fashion to maintain a triple line (not necessarily in equilibrium) with old grains. The resulting stress redistribution due to strain compatibility is found to have a profound influence on the subsequent dislocation evolution and softening.

[1]  D. Ponge,et al.  Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior , 1998 .

[2]  Hidehiro Onodera,et al.  Three-dimensional phase field simulation of the effect of anisotropy in grain-boundary mobility on growth kinetics and morphology of grain structure , 2007 .

[3]  J. Cahn,et al.  A microscopic theory for antiphase boundary motion and its application to antiphase domain coasening , 1979 .

[4]  Yunzhi Wang,et al.  Heterogeneously randomized STZ model of metallic glasses: Softening and extreme value statistics during deformation , 2013 .

[5]  Hervé Moulinec,et al.  A Computational Method Based on Augmented Lagrangians and Fast Fourier Transforms for Composites with High Contrast , 2000 .

[6]  P. Onck,et al.  Advances in Mechanical Behaviour, Plasticity and Damage , 2000 .

[7]  F. Dunne,et al.  Initiation of dynamic recrystallization under inhomogeneous stress states in pure copper , 1999 .

[8]  Ricardo A. Lebensohn,et al.  A self-consistent anisotropic approach for the simulation of plastic deformation and texture development of polycrystals : application to zirconium alloys , 1993 .

[9]  L. Anand,et al.  Inelastic deformation of polycrystalline face centered cubic materials by slip and twinning , 1998 .

[10]  U. F. Kocks,et al.  Kinetics of flow and strain-hardening☆ , 1981 .

[11]  Asj Akke Suiker,et al.  Transformation-induced plasticity in ferrous alloys , 2005 .

[12]  Dierk Raabe,et al.  A dislocation density based constitutive model for crystal plasticity FEM including geometrically necessary dislocations , 2006 .

[13]  A. Karma,et al.  Phase-Field Simulation of Solidification , 2002 .

[14]  N. Ma,et al.  Computer simulation of texture evolution during grain growth: effect of boundary properties and initial microstructure , 2004 .

[15]  Zi-kui Liu,et al.  An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals , 2015 .

[16]  P. Anderson,et al.  Coupling between martensitic phase transformations and plasticity: A microstructure-based finite element model , 2010 .

[17]  Akinori Yamanaka,et al.  Phase-field model during static recrystallization based on crystal-plasticity theory , 2007 .

[18]  Z. Guo,et al.  Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization , 2001 .

[19]  L. Murr Interfacial phenomena in metals and alloys , 1975 .

[20]  Yunzhi Wang,et al.  Large-scale three-dimensional phase field simulation of γ ′-rafting and creep deformation , 2010 .

[21]  Long-Qing Chen Phase-Field Models for Microstructure Evolution , 2002 .

[22]  S. Raza,et al.  Grain growth in copper and alpha-brasses , 1990 .

[23]  Dierk Raabe,et al.  Revealing the strain-hardening behavior of twinning-induced plasticity steels: Theory, simulations, , 2013 .

[24]  Gerbrand Ceder,et al.  Evaluation of interfacial excess contributions in different phase-field models for elastically inhomogeneous systems , 2013 .

[25]  N. Moelans,et al.  Phase-field simulation study of the migration of recrystallization boundaries , 2013 .

[26]  Yiyi Li,et al.  Mesoscale simulation of deformed austenite decomposition into ferrite by coupling a cellular automaton method with a crystal plasticity finite element model , 2005 .

[27]  S. Kalidindi Incorporation of deformation twinning in crystal plasticity models , 1998 .

[28]  A. Finel,et al.  Coupling phase field and viscoplasticity to study rafting in Ni-based superalloys , 2010 .

[29]  U. F. Kocks,et al.  A hybrid finite element formulation for polycrystal plasticity with consideration of macrostructural and microstructural linking , 1995 .

[30]  F. Roters,et al.  A constitutive model for fcc single crystals based on dislocation densities and its application to uniaxial compression of aluminium single crystals , 2004 .

[31]  J. M. Perlado,et al.  Unraveling the temperature dependence of the yield strength in single-crystal tungsten using atomistically-informed crystal plasticity calculations , 2015, 1506.02224.

[32]  J. Jonas,et al.  Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions , 2014 .

[33]  Esteban P. Busso,et al.  Discrete dislocation density modelling of single phase FCC polycrystal aggregates , 2004 .

[34]  Michael P. Anderson,et al.  Computer simulation of recrystallization in non-uniformly deformed metals , 1989 .

[35]  Srikanth Vedantam,et al.  Efficient numerical algorithm for multiphase field simulations. , 2006, Physical review. E, Statistical, nonlinear, and soft matter physics.

[36]  M. Ortiz,et al.  A material‐independent method for extending stress update algorithms from small-strain plasticity to finite plasticity with multiplicative kinematics , 1992 .

[37]  Robert D. Weed,et al.  Copper and Copper Alloys , 2015 .

[38]  Athanasios Arsenlis,et al.  Modeling the evolution of crystallographic dislocation density in crystal plasticity , 2002 .

[39]  Jeff Simmons,et al.  Phase field modeling of simultaneous nucleation and growth by explicitly incorporating nucleation events , 2000 .

[40]  T Prakash G. Thamburaja,et al.  Polycrystalline shape-memory materials: effect of crystallographic texture , 2001 .

[41]  W. T. Huh,et al.  Experimental lower bounds on geometrically necessary dislocation density , 2010 .

[42]  C. Bauer,et al.  Kinetics of grain boundary migration in copper bicrystals with [001] rotation axes☆ , 1973 .

[43]  Carlos N. Tomé,et al.  A dislocation-based constitutive law for pure Zr including temperature effects , 2008 .

[44]  Yunzhi Wang,et al.  Sparse data structure and algorithm for the phase field method , 2006 .

[45]  Stephen R. Niezgoda,et al.  Stochastic modeling of twin nucleation in polycrystals: An application in hexagonal close-packed metals , 2014 .

[46]  J. Jonas,et al.  Effect of initial grain size on dynamic recrystallization of copper , 1983 .

[47]  H. W. Hesselbarth,et al.  Simulation of recrystallization by cellular automata , 1991 .

[48]  G. Gottstein,et al.  Correlation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60 , 2001 .

[49]  Chen,et al.  Computer simulation of the domain dynamics of a quenched system with a large number of nonconserved order parameters: The grain-growth kinetics. , 1994, Physical review. B, Condensed matter.

[50]  P. Vacher,et al.  Strain field evolution during dynamic recrystallization nucleation; A case study on ice , 2015 .

[51]  John E. Allison,et al.  Integrated computational materials engineering: A perspective on progress and future steps , 2011 .

[52]  S. A. Dregia,et al.  Generalized phase-field model for computer simulation of grain growth in anisotropic systems , 2000 .

[53]  Yunzhi Wang,et al.  Phase field modeling of defects and deformation , 2010 .

[54]  T. Takaki,et al.  Multiscale modeling of hot-working with dynamic recrystallization by coupling microstructure evolution and macroscopic mechanical behavior , 2014 .

[55]  M. Ashby,et al.  Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics , 1982 .

[56]  T. Sakai Dynamic recrystallization microstructures under hot working conditions , 1995 .

[57]  W. Roberts,et al.  Dynamic recrystallization kinetics , 1979 .

[58]  L. Anand,et al.  Crystallographic texture evolution in bulk deformation processing of FCC metals , 1992 .

[59]  C. F. Niordson,et al.  Length-scale effect due to periodic variation of geometrically necessary dislocation densities , 2013 .

[60]  M. Groeber,et al.  DREAM.3D: A Digital Representation Environment for the Analysis of Microstructure in 3D , 2014, Integrating Materials and Manufacturing Innovation.

[61]  I. Steinbach Phase-field models in materials science , 2009 .

[62]  J. Nye Some geometrical relations in dislocated crystals , 1953 .

[63]  Huajian Gao,et al.  Geometrically necessary dislocation and size-dependent plasticity , 2003 .

[64]  D. J. Jensen,et al.  Grain boundary mobility during recrystallization of copper , 1997 .

[65]  T. Bieler,et al.  Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications , 2010 .

[66]  M. Daymond,et al.  A finite element model of deformation twinning in zirconium , 2008 .

[67]  Jeff Simmons,et al.  Increasing length scale of quantitative phase field modeling of growth-dominant or coarsening-dominant process , 2004 .

[68]  F. J. Humphreys,et al.  Recrystallization and Related Annealing Phenomena , 1995 .

[69]  Yunzhi Wang,et al.  Extended defects, ideal strength and actual strengths of finite-sized metallic glasses , 2014 .

[70]  T. Sakai,et al.  Dislocation substructures developed during dynamic recrystallisation in polycrystalline nickel , 1990 .

[71]  Taku Sakai,et al.  Nucleation and microtexture development under dynamic recrystallization of copper , 2002 .

[72]  C. M. Sellars,et al.  Grain-Size Effects during Dynamic Recrystallization of Nickel , 1974 .

[73]  Bart Blanpain,et al.  Quantitative analysis of grain boundary properties in a generalized phase field model for grain growth in anisotropic systems , 2008 .

[74]  John J. Jonas,et al.  Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations , 1984 .

[75]  Yunzhi Wang,et al.  Grain growth in anisotropic systems: comparison of effects of energy and mobility , 2002 .

[76]  R. Lebensohn N-site modeling of a 3D viscoplastic polycrystal using Fast Fourier Transform , 2001 .

[77]  B. Blanpain,et al.  Quantitative phase-field approach for simulating grain growth in anisotropic systems with arbitrary inclination and misorientation dependence. , 2008, Physical review letters.

[78]  Raymond F. Wegman,et al.  Copper and Copper Alloys , 2013 .

[79]  Ricardo A. Lebensohn,et al.  Simulation of micromechanical behavior of polycrystals: finite elements versus fast Fourier transforms , 2009 .

[80]  Vasily V. Bulatov,et al.  On the evolution of crystallographic dislocation density in non-homogeneously deforming crystals , 2004 .

[81]  Dierk Raabe,et al.  Cellular Automata in Materials Science with Particular Reference to Recrystallization Simulation , 2002 .

[82]  J. Jonas,et al.  Nucleation of dynamic recrystallization at triple junctions in polycrystalline copper , 2005 .

[83]  Surya R. Kalidindi,et al.  Strain hardening due to deformation twinning in α-titanium : Constitutive relations and crystal-plasticity modeling , 2005 .

[84]  M. Diehl,et al.  A spectral method solution to crystal elasto-viscoplasticity at finite strains , 2013 .

[85]  D. Hull,et al.  Introduction to Dislocations , 1968 .

[86]  A. Brahme,et al.  Coupled crystal plasticity – Probabilistic cellular automata approach to model dynamic recrystallization in magnesium alloys , 2015 .

[87]  W. King,et al.  Observations of lattice curvature near the interface of a deformed aluminium bicrystal , 2000 .

[88]  Taku Sakai,et al.  Nucleation of dynamic recrystallization at grain boundaries in copper bicrystals , 2004 .

[89]  H. Dai Geometrically-necessary dislocation density in continuum plasticity theory, FEM implementation and applications , 1997 .

[90]  Dan Backman,et al.  Integrated computational materials engineering: A new paradigm for the global materials profession , 2006 .

[91]  Philip Eisenlohr,et al.  An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials , 2012 .

[92]  T. Takaki,et al.  Multi-Phase-Field Model to Simulate Microstructure Evolutions during Dynamic Recrystallization , 2008 .