A studying on load transfer in carbon nanotube/epoxy composites under tension

Abstract The shear-lag model is developed to study the effect of geometry and material properties of epoxy and carbon nanotubes on load transfer in carbon nanotube/epoxy composites under tension. The results from proposed shear-lag model are validated by finite element method and the Haque’s model. Results show that the aspect ratio of the half-length to the outer radius of carbon nanotubes and their layer number have significant influence on load transfer in the composites. On the other hand, this research reveals new findings, which are not reported in other previous works. That is, no noticeable influences of the epoxy Young’s modulus and the interface shear modulus between epoxy matrix and carbon nanotube layers are found on load transfer in terms of the saturated stress length. In addition, the carbon nanotube volume percentage is found not affecting the load transfer. This research presents a better understanding on mechanical properties of carbon nanotube/epoxy composites.

[1]  S. Her,et al.  Analytical model for predicting the interfacial stresses of carbon nanotubes-reinforced nanocomposites , 2014 .

[2]  N. V. Viet,et al.  Load transfer in fractured carbon nanotubes under tension , 2012 .

[3]  V. Varadan,et al.  Mechanical properties of carbon nanotube/polymer composites , 2014, Scientific Reports.

[4]  A. Haque,et al.  Theoretical study of stress transfer in carbon nanotube reinforced polymer matrix composites , 2005 .

[5]  J. Tsai,et al.  Investigating the load transfer efficiency in carbon nanotubes reinforced nanocomposites , 2008 .

[6]  S. K. Georgantzinos,et al.  Investigation of stress transfer in carbon nanotube reinforced composites using a multi-scale finite element approach , 2014 .

[7]  Linda S. Schadler,et al.  LOAD TRANSFER IN CARBON NANOTUBE EPOXY COMPOSITES , 1998 .

[8]  G. Dolling,et al.  LATTICE VIBRATIONS IN PYROLITIC GRAPHITE , 1962 .

[9]  Xin-Lin Gao,et al.  A shear-lag model for carbon nanotube-reinforced polymer composites , 2005 .

[10]  H. L. Cox.  The elasticity and strength of paper and other fibrous materials , 1952 .

[11]  Elizabeth C. Dickey,et al.  Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites , 2000 .

[12]  L. Jia,et al.  Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests , 2015 .

[13]  Isaac M Daniel,et al.  Mechanical characterization of graphite/epoxy nanocomposites by multi-scale analysis , 2007 .

[14]  N. V. Viet,et al.  Shear transfer in fractured carbon nanotubes under torsion , 2012 .

[15]  James R. Fair,et al.  Applied numerical methods with personal computers , 1987 .

[16]  Hyonny Kim,et al.  Stress transfer in multi-walled carbon nanotubes , 2007 .

[17]  N. V. Viet,et al.  Stress distribution in carbon nanotubes with bending fracture , 2015 .