A review: additive manufacturing for active electronic components
暂无分享,去创建一个
[1] Donal D. C. Bradley,et al. Mobility enhancement in conjugated polymer field-effect transistors through chain alignment in a liquid-crystalline phase , 2000 .
[2] M. Schwab,et al. Screen‐Printable Thin Film Supercapacitor Device Utilizing Graphene/Polyaniline Inks , 2013 .
[3] S. Forrest,et al. VERY HIGH-EFFICIENCY GREEN ORGANIC LIGHT-EMITTING DEVICES BASED ON ELECTROPHOSPHORESCENCE , 1999 .
[4] Hartmut Yersin,et al. Triplet emitters for OLED applications. Mechanisms of exciton trapping and control of emission properties , 2004 .
[5] R Swan,et al. THE LAST PLACE ON EARTH , 1996 .
[6] Chee Kai Chua,et al. 3D printing and additive manufacturing : principles and applications , 2015 .
[7] Ping Liu,et al. High-performance semiconducting polythiophenes for organic thin-film transistors. , 2004, Journal of the American Chemical Society.
[8] Michael C. McAlpine,et al. 3D Printed Bionic Ears , 2013, Nano letters.
[9] Flora M. Li,et al. Ink-jet printing of carbon nanotube thin film transistors , 2007 .
[10] V. Subramanian,et al. Printed organic transistors for ultra-low-cost RFID applications , 2004, 4th IEEE International Conference on Polymers and Adhesives in Microelectronics and Photonics, 2004. POLYTRONIC 2004..
[11] Sheng Li,et al. Electroluminescence from printed stellate polyhedral oligomeric silsesquioxanes , 2009 .
[12] Ricardo E Sousa,et al. Advances and Future Challenges in Printed Batteries. , 2015, ChemSusChem.
[13] Hitoshi Ohmori,et al. Dye-sensitized solar cell utilizing electrostatic inkjet , 2013 .
[14] Ian M. Hutchings,et al. Inkjet Technology for Digital Fabrication , 2012 .
[15] U. Schubert,et al. Inkjet Printing of Polymers: State of the Art and Future Developments , 2004 .
[16] Janos Veres,et al. Gate Insulators in Organic Field-Effect Transistors , 2004 .
[17] Stephen R. Forrest,et al. High-efficiency red electrophosphorescence devices , 2001 .
[18] Yong Cao,et al. Coffee-Ring-Free Quantum Dot Thin Film Using Inkjet Printing from a Mixed-Solvent System on Modified ZnO Transport Layer for Light-Emitting Devices. , 2016, ACS applied materials & interfaces.
[19] Jie Zhang,et al. Formulation of novel screen-printable dielectric ink for fully-printed TIPs-pentacene OFETs , 2014 .
[20] B. H. King,et al. Characterzing aerosol Jet® multi-nozzle process parameters for non-contact front side metallization of silicon solar cells , 2009, 2009 34th IEEE Photovoltaic Specialists Conference (PVSC).
[21] T. Jackson,et al. Organic thin film transistors , 1997, Conference Proceedings. LEOS '97. 10th Annual Meeting IEEE Lasers and Electro-Optics Society 1997 Annual Meeting.
[22] Stephen R. Forrest,et al. Direct patterning of organic light-emitting devices by organic-vapor jet printing , 2005 .
[23] Paul F. Baude,et al. High Performance Organic Thin Film Transistors , 2003 .
[24] S. Lam Po Tang,et al. Recent developments in flexible wearable electronics for monitoring applications , 2007 .
[25] Roland Huntford,et al. The Last Place on Earth , 1979 .
[26] M. Aegerter,et al. Direct gravure printing of indium tin oxide nanoparticle patterns on polymer foils , 2008 .
[27] S. Agarwala,et al. Probing the morphology-device relation of Fe₂O₃ nanostructures towards photovoltaic and sensing applications. , 2012, Nanoscale.
[28] Stephen R. Forrest,et al. Direct mask-free patterning of molecular organic semiconductors using organic vapor jet printing , 2004 .
[29] Maxim Shkunov,et al. Liquid-crystalline semiconducting polymers with high charge-carrier mobility , 2006, Nature materials.
[30] Philippe Delaporte,et al. Pulsed-laser printing of organic thin-film transistors , 2009 .
[31] Hiroki Mori,et al. Alkylated Dinaphtho[2,3‐b:2′,3′‐f]Thieno[3,2‐b]Thiophenes (Cn‐DNTTs): Organic Semiconductors for High‐Performance Thin‐Film Transistors , 2011, Advanced materials.
[32] Joerg Franke,et al. Aerosol Jet printing on rapid prototyping materials for fine pitch electronic applications , 2011, 2011 IEEE 61st Electronic Components and Technology Conference (ECTC).
[33] B.K. Kaushik,et al. Organic Thin Film Transistor Architecture, Parameters and their Applications , 2011, 2011 International Conference on Communication Systems and Network Technologies.
[34] Daniel A. Steingart,et al. Recent Progress on Printed Flexible Batteries: Mechanical Challenges, Printing Technologies, and Future Prospects , 2015 .
[35] Yeonkyung Lee,et al. Toward high‐resolution, inkjet‐printed, quantum dot light‐emitting diodes for next‐generation displays , 2016 .
[36] Mike Hambsch,et al. Modified mass printing technique for the realization of source/drain electrodes with high resolution , 2010 .
[37] David Harrison,et al. Capacitive-type humidity sensors fabricated using the offset lithographic printing process , 2002 .
[38] Ben Wang,et al. Aerosol jet printing for 3-D multilayer passive microwave circuitry , 2014, 2014 44th European Microwave Conference.
[39] Soon-Ki Kwon,et al. All-Inkjet-Printed Organic Thin-Film Transistor Inverter on Flexible Plastic Substrate , 2011, IEEE Electron Device Letters.
[40] Minseok Kim,et al. Flexible ambipolar organic field-effect transistors with reverse-offset-printed silver electrodes for a complementary inverter , 2016, Nanotechnology.
[41] Maximilian Landgraf,et al. Aerosol jet printing and lightweight power electronics for dielectric elastomer actuators , 2013, 2013 3rd International Electric Drives Production Conference (EDPC).
[42] David B. Wallace,et al. Acoustic phenomena in a demand mode piezoelectric ink jet printer , 2002 .
[43] C. Daniel Frisbie,et al. Performance and stability of aerosol-jet-printed electrolyte-gated transistors based on poly(3-hexylthiophene). , 2013, ACS applied materials & interfaces.
[44] Gregory D. Abowd,et al. Instant inkjet circuits: lab-based inkjet printing to support rapid prototyping of UbiComp devices , 2013, UbiComp.
[45] Christopher D. Rahn,et al. Battery Systems Engineering , 2014 .
[46] Daniel A. Steingart,et al. A flexible high potential printed battery for powering printed electronics , 2013 .
[47] M. Renn,et al. Printing conformal electronics on 3D structures with Aerosol Jet technology , 2012, 2012 Future of Instrumentation International Workshop (FIIW) Proceedings.
[48] R. N. Marks,et al. Light-emitting diodes based on conjugated polymers , 1990, Nature.
[49] Katsuaki Suganuma,et al. Introduction to Printed Electronics , 2014, Springer Briefs in Electrical and Computer Engineering.
[50] D. Gethin,et al. Patterning of micro-scale conductive networks using reel-to-reel flexographic printing , 2010 .
[51] Roar R. Søndergaard,et al. Roll-to-roll printing and coating techniques for manufacturing large-area flexible organic electronics , 2015 .
[52] George G. Malliaras,et al. Humidity sensors based on pentacene thin-film transistors , 2002 .
[53] K. Guarini,et al. High-Resolution Inkjet Printing of All-Polymer Transistor Circuits , 2009 .
[54] Jiyoul Lee,et al. Printable ion-gel gate dielectrics for low-voltage polymer thin-film transistors on plastic. , 2008, Nature materials.
[55] Antonio Facchetti,et al. Semiconductors for organic transistors , 2007 .
[56] Helmut Kipphan,et al. Handbook of Print Media: Technologies and Production Methods , 2006 .
[57] Shi-Li Zhang,et al. Ink-jet printed thin-film transistors with carbon nanotube channels shaped in long strips , 2011 .
[58] Corrado Carta,et al. Analog Characteristics of Fully Printed Flexible Organic Transistors Fabricated With Low-Cost Mass-Printing Techniques , 2014, IEEE Transactions on Electron Devices.
[59] Stephen R. Forrest,et al. Thermally induced failure mechanisms of organic light emitting device structures probed by X-ray specular reflectivity , 1997 .
[60] Zhenan Bao,et al. Soluble and processable regioregular poly(3‐hexylthiophene) for thin film field‐effect transistor applications with high mobility , 1996 .
[61] Kyung Cheol Choi,et al. Thin-Film Thermoelectric Module for Power Generator Applications Using a Screen-Printing Method , 2011 .
[62] Byung-Jun Jung,et al. Relationship between the liquid crystallinity and field‐effect‐transistor behavior of fluorene–thiophene‐based conjugated copolymers , 2006 .
[63] Hyun Wook Kang,et al. Flexible supercapacitor fabrication by room temperature rapid laser processing of roll-to-roll printed metal nanoparticle ink for wearable electronics application , 2014 .
[64] C. Grigoropoulos,et al. All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles , 2007 .
[65] F. J. Adrian,et al. Metal deposition from a supported metal film using an excimer laser , 1986 .
[66] Jonathan D. Raff,et al. A π-Stacking Terthiophene-Based Quinodimethane Is an n-Channel Conductor in a Thin Film Transistor , 2002 .
[67] Felix Wortmann,et al. Internet of Things , 2015, Business & Information Systems Engineering.
[68] Shizuo Tokito,et al. n-type organic field-effect transistors with very high electron mobility based on thiazole oligomers with trifluoromethylphenyl groups. , 2005, Journal of the American Chemical Society.
[69] Woo Y. Lee,et al. Graphene supercapacitor electrodes fabricated by inkjet printing and thermal reduction of graphene oxide , 2011 .
[70] Stefan W. Glunz,et al. Metal aerosol jet printing for solar cell metallization , 2007 .
[71] Yong-Young Noh,et al. Downscaling of Organic Field‐Effect Transistors with a Polyelectrolyte Gate Insulator , 2008 .
[72] P. Wilson,et al. Development of electronic textiles to support networks, communications, and medical applications in future U.S. Military protective clothing systems , 2005, IEEE Transactions on Information Technology in Biomedicine.
[73] Michael C. McAlpine,et al. 3D printed quantum dot light-emitting diodes. , 2014, Nano letters.
[74] Alessandra Sanson,et al. Role of water in TiO2 screen-printing inks for dye-sensitized solar cells , 2015 .
[75] B. Derby. Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution , 2010 .
[76] Benjamin C. K. Tee,et al. Skin-like pressure and strain sensors based on transparent elastic films of carbon nanotubes. , 2011, Nature nanotechnology.
[77] Bernard Geffroy,et al. Organic light‐emitting diode (OLED) technology: materials, devices and display technologies , 2006 .
[78] Piero Cosseddu,et al. Inkjet printing of transparent, flexible, organic transistors , 2011 .
[79] J. Rogers,et al. Elastomeric Transistor Stamps: Reversible Probing of Charge Transport in Organic Crystals , 2004, Science.
[80] Yoshio Taniguchi,et al. High mobility n-type thin-film transistors based on N,N′-ditridecyl perylene diimide with thermal treatments , 2006 .
[81] Xiaojun Guo,et al. All ink-jet printed low-voltage organic field-effect transistors on flexible substrate , 2016 .
[82] H W Li,et al. Dewetting of conducting polymer inkjet droplets on patterned surfaces , 2004, Nature materials.
[83] Soo Jin Chua,et al. Degradation and failure of organic light-emitting devices , 2002 .
[84] N. Nakashima,et al. Electrostatic Inkjet Printing of Carbon Nanotube for Cold Cathode Application , 2007, 2007 Digest of papers Microprocesses and Nanotechnology.
[85] Alasdair J. Campbell,et al. Indacenodithiophene-benzothiadiazole organic field-effect transistors with gravure-printed semiconductor and dielectric on plastic , 2015 .
[86] Jürgen Köhler,et al. Physical model for the laser induced forward transfer process , 2012 .
[87] Brian Derby,et al. Ink-jet delivery of particle suspensions by piezoelectric droplet ejectors , 2005 .
[88] Wi Hyoung Lee,et al. Recent advances in organic transistor printing processes. , 2013, ACS applied materials & interfaces.
[89] Soon-Ki Kwon,et al. All-Inkjet-Printed Organic Thin-Film Transistors with Silver Gate, Source/Drain Electrodes , 2011 .
[90] G. Jabbour,et al. Inkjet Printed RGB Quantum Dot-Hybrid LED , 2010, Journal of Display Technology.
[91] Il Ki Han,et al. The response characteristics of a gas sensor based on poly-3-hexylithiophene thin-film transistors , 2010 .
[92] Minseok Kim,et al. High-Performance Pentacene Thin-Film Transistors Fabricated by Printing Technology , 2011, IEEE Electron Device Letters.
[93] Elsa Reichmanis,et al. Ring oscillator fabricated completely by means of mass-printing technologies , 2007 .
[94] Tobin J. Marks,et al. n‐Type Building Blocks for Organic Electronics: A Homologous Family of Fluorocarbon‐Substituted Thiophene Oligomers with High Carrier Mobility , 2003 .
[95] Reinhard R. Baumann,et al. Inkjet Printing as a Key Enabling Technology for Printed Electronics , 2011 .
[96] Michael A. Haase,et al. Pentacene-based radio-frequency identification circuitry , 2003 .
[97] Vivek Subramanian,et al. High-Speed Printing of Transistors: From Inks to Devices , 2015, Proceedings of the IEEE.
[98] Vivek Subramanian,et al. Plastic-Compatible Low Resistance Printable Gold Nanoparticle Conductors for Flexible Electronics , 2003 .
[99] Arved C. Hübler,et al. Modified poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) source/drain electrodes for fully printed organic field-effect transistors consisting of a semiconductor blend , 2013 .
[100] S. Reineke. Complementary LED technologies. , 2015, Nature materials.
[101] H. Sirringhaus,et al. High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.
[102] Po-Chiang Chen,et al. Inkjet printing of single-walled carbon nanotube/RuO2 nanowire supercapacitors on cloth fabrics and flexible substrates , 2010 .
[103] Daniel R. Gamota,et al. Fully printed silicon field effect transistors , 2009 .
[104] Dong-Soo Kim,et al. Fabrication of Printed Organic Thin-Film Transistors Using Roll Printing , 2008 .
[105] R. Boudreau,et al. Gravure Printing of Conductive Inks on Glass Substrates for Applications in Printed Electronics , 2011, Journal of Display Technology.
[106] Leandro Lorenzelli,et al. Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review , 2015, IEEE Sensors Journal.
[107] Ben Wang,et al. Conductivity enhancement of aerosol-jet printed electronics by using silver nanoparticles ink with carbon nanotubes , 2012 .
[108] Xuejun Lu,et al. Aerosol-jet-printed, high-speed, flexible thin-film transistor made using single-walled carbon nanotube solution , 2010 .
[109] Yong-Young Noh,et al. Downscaling of self-aligned, all-printed polymer thin-film transistors. , 2007, Nature nanotechnology.
[110] Ireneusz Brzozowski,et al. Estimation and harvesting of human heat power for wearable electronic devices , 2016 .
[111] Marko Topič,et al. Sol-gel based TiO2 paste applied in screen-printed dye-sensitized solar cells and modules , 2013 .
[112] J. Sakai,et al. High efficiency organic solar cells by screen printing method , 2005, Conference Record of the Thirty-first IEEE Photovoltaic Specialists Conference, 2005..
[113] Janos Veres,et al. Polymer-based organic field-effect transistor using offset printed source/drain structures , 2005 .