Distribution of electrical installation

Article is a distribution of the electrical installation with at least one serving for the mounting of devices rail (3) or mounting plate, are arranged for each other, two supports to a substructure at a distance (2) to which it is attached. The supports (2) on the one hand and the top hat rail (3) or mounting plate or on this arranged coupling parts (4) on the other hand, have mutual adjustments, the cohesive together with at least one of them manually releasable latch (6, 9) form a firm seat. The notches (6, 9) are arranged at the, considered together, outer sides of the two supports (2). By unlocking the catch, a fully occupied with appliances DIN rail can be taken here to lay the pipes to be laid behind her. Then it can be easily and quickly reattached. Then the devices are connected. Unlike the previous screw fasteners which are covered by patch devices that are located behind the mounting rail to the supports detents are accessible. They can be reached with a finger behind the devices yet. On the outer sides of the two supports, they can be pressed simultaneously with the index finger or middle finger of the left and right hands, and the hands can thereby grasp the DIN rail with the person sitting on their devices and remove. For a mounting plate which has usually only a device ...