Nanometre-scale Oxidation of Silicon Surfaces by Dynamic Force Microscopy: Reproducibility, Kinetics and Nanofabrication

Local oxidation of silicon surfaces by scanning probe microscopy is a very promising lithographic approach at nanometre scale. Here, we present two approaches to optimize the oxidation for nanofabrication purposes: (i) we analyse the reproducibility and kinetics of the oxidation of Si(100) surfaces when there is no tip and sample mechanical contact and (ii) we study the effect of modulating the voltage in the aspect ratio of the oxide structures grown. The finite tip-sample separation has remarkable practical consequences: the same tip can be used to perform thousands of modifications without any sign of wear. In addition, the structures generated do not show any degradation over long periods (months). It is also found that the kinetics is independent of the force microscopy mode used (contact or non-contact). On the other hand, the application of an AC voltage to induce the oxidation significantly modifies the aspect ratio of the structures. A detailed description of the oxidation mechanism is proposed to account for both results.

[1]  Eric S. Snow,et al.  Single‐atom point contact devices fabricated with an atomic force microscope , 1996 .

[2]  Hyongsok T. Soh,et al.  Fabrication of 0.1 um metal oxide semiconductor field-effect transistors with the atomic force microscope , 1995 .

[3]  Kazuhiko Matsumoto,et al.  Application of scanning tunneling microscopy nanofabrication process to single electron transistor , 1996 .

[4]  Kazuhiko Matsumoto,et al.  Single-Electron Transistors (SETs) with Nb/Nb Oxide System Fabricated by Atomic Force Microscope (AFM) Nano-Oxidation Process. , 1997 .

[5]  Emmanuel Dubois,et al.  NANOOXIDATION USING A SCANNING PROBE MICROSCOPE : AN ANALYTICAL MODEL BASED ON FIELD INDUCED OXIDATION , 1997 .

[6]  P. Couturier.  Japan , 1988, The Lancet.

[7]  Phaedon Avouris,et al.  Atomic force microscope tip-induced local oxidation of silicon: kinetics, mechanism, and nanofabrication , 1997 .

[8]  Michael T. Postek,et al.  Modification of hydrogen-passivated silicon by a scanning tunneling microscope operating in air , 1990 .

[9]  Kang L. Wang,et al.  Nanometer‐structure writing on Si(100) surfaces using a non‐contact‐mode atomic force microscope , 1994 .

[10]  Hiroshi Yokoyama,et al.  Understanding scanned probe oxidation of silicon , 1998 .

[11]  L. Ley,et al.  Nanometer‐scale field‐induced oxidation of Si(111):H by a conducting‐probe scanning force microscope: Doping dependence and kinetics , 1995 .

[12]  Francesc Pérez-Murano,et al.  Local oxidation of silicon surfaces by dynamic force microscopy: Nanofabrication and water bridge formation , 1998 .

[13]  David R. Allee,et al.  Selective area oxidation of silicon with a scanning force microscope , 1993 .

[14]  G. Abadal,et al.  Nanometer‐scale oxidation of Si(100) surfaces by tapping mode atomic force microscopy , 1995 .