Analysis of Open Architecture 6R Robot Forward and Inverse Kinematics Adaptive to Structural Variations

This paper presents a kinematic analysis for an open architecture 6R robot controller, which is designed to control robots made by domestic manufactures with structural variations. Usually, robot kinematic studies are often introduced for specific robot types, and therefore, difficult to apply the kinematic model from one to another robot. This study incorporates most of the robot structural variations in one model so that it is convenient to switch robot types by modifying model parameters. By combining an adequate set of parameters, the kinematic models, especially the inverse kinematics, are derived. The kinematic models are proved to be suitable for many classic industrial robot types, such as Puma560, ABB IRB120/1600, KAWASAKI RS003N/RS010N, FANUC M6iB/M10iA, and therefore be applicable to those with similar structures. The analysis and derivation of the forward and inverse kinematic models are presented, and the results are proven to be accurate.

[1]  Ignacy Duleba,et al.  A comparison of Jacobian-based methods of inverse kinematics for serial robot manipulators , 2013, Int. J. Appl. Math. Comput. Sci..

[2]  Huimin Dong,et al.  A new approach of kinematic geometry for error identification and compensation of industrial robots , 2019 .

[3]  Ma Cong-guo.  Study on the inverse kinematics analysis and solution of FANUC_M-6iB robot , 2008 .

[4]  Hakan Temeltas,et al.  A Comparative Study of Three Inverse Kinematic Methods of Serial Industrial Robot Manipulators in the Screw Theory Framework , 2011 .

[5]  Shiqiang Zhu,et al.  An Efficient Inverse Kinematic Algorithm for a PUMA560-Structured Robot Manipulator , 2013 .

[6]  Daniel Martins,et al.  Hierarchical kinematic analysis of robots , 2003 .

[7]  I. Vasilyev,et al.  Analytical solution to inverse kinematic problem for 6-DOF robot-manipulator , 2010 .

[8]  Tian Huang,et al.  A new numerical algorithm for the inverse position analysis of all serial manipulators , 2005, Robotica.

[9]  Cristina Castejón,et al.  Dynamic Modeling of the Dissipative Contact and Friction Forces of a Passive Biped-Walking Robot , 2020, Applied Sciences.

[10]  Serdar Kucuk,et al.  Inverse kinematics solutions for industrial robot manipulators with offset wrists , 2014 .

[11]  B. Roth,et al.  Inverse Kinematics of the General 6R Manipulator and Related Linkages , 1993 .

[12]  Juan Carlos García-Prada,et al.  Methodology for the navigation optimization of a terrain-adaptive unmanned ground vehicle , 2018 .

[14]  J. A. Rose,et al.  Editor's Farewell , 2006, Robotica.

[15]  Yong Guan,et al.  Inverse kinematic solution of 6R robot manipulators based on screw theory and the Paden–Kahan subproblem , 2018, International Journal of Advanced Robotic Systems.

[16]  Li Jiang,et al.  Genetic Algorithm for Solving the Inverse Kinematics Problem for General 6R Robots , 2015 .

[17]  Xu Hai-li.  Analysis on Structure and Kinematics of FANUC M-6iB Industrial Robot , 2009 .

[18]  Cristina Castejón,et al.  Kinematics and Dynamics of the Quasi-Passive Biped “PASIBOT” , 2011 .