Dynamic shear plugging of beams and plates with an advancing crack

[1]  T. Wierzbicki,et al.  Numerical study on crack propagation in high velocity perforation , 2005 .

[2]  Tomasz Wierzbicki,et al.  EFFECT OF FRACTURE CRITERIA ON HIGH VELOCITY PERFORATION OF THIN BEAMS , 2004 .

[3]  T. Wierzbicki,et al.  On fracture locus in the equivalent strain and stress triaxiality space , 2004 .

[4]  Qingming Li,et al.  Shear plugging and perforation of ductile circular plates struck by a blunt projectile , 2003 .

[5]  M. Langseth,et al.  Effect of target thickness in blunt projectile penetration of Weldox 460 E steel plates , 2003 .

[6]  C. Wożniak,et al.  On the macroscopic modelling of elastic/viscoplastic composites , 2002 .

[7]  T. Wierzbicki,et al.  Wave solution for an impulsively loaded rigid-plastic circular membrane , 2002 .

[8]  Tore Børvik,et al.  Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and c , 2002 .

[9]  Odd Sture Hopperstad,et al.  Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and conical noses: Part II: numerical simulations , 2002 .

[10]  Norman Jones,et al.  Formation of a shear localization in structural elements under transverse dynamic loads , 2000 .

[11]  Norman Jones,et al.  Response and Failure of Ductile Circular Plates Struck by a Mass , 1997 .

[12]  T. Wierzbicki,et al.  Transient response of an impulsively loaded plastic string on a plastic foundation , 1996 .

[13]  Tomasz Wierzbicki,et al.  A tension zone model of blanking and tearing of ductile metal plates , 1996 .

[14]  G. G. Corbett,et al.  Impact loading of plates and shells by free-flying projectiles: A review , 1996 .

[15]  Dongquan Liu,et al.  Perforation of rigid-plastic plate by blunt missile , 1995 .

[16]  M. Meyers Dynamic Behavior of Materials , 1994 .

[17]  T. Wierzbicki,et al.  Impact response of a string-on-plastic foundation , 1992 .

[18]  John W. Hutchinson,et al.  Dynamic Fracture Mechanics , 1990 .

[19]  N. Jones,et al.  The impact behaviour of aluminium alloy and mild steel double-shear specimens , 1988 .

[20]  Charles E. Anderson,et al.  Ballistic impact: the status of analytical and numerical modeling , 1988 .

[21]  R. L. Woodward,et al.  A structural model for thin plate perforation by normal impact of blunt projectiles , 1987 .

[22]  A. Slocum,et al.  Predicting fully plastic mode II crack growth from an asymmetric defect , 1985 .

[23]  Werner Goldsmith,et al.  Plate perforation phenomena due to normal impact by blunt cylinders , 1984 .

[24]  James M. Kelly,et al.  A phenomenological penetration model of plates , 1983 .

[25]  R. L. Woodward,et al.  Penetration of targets by flat-ended projectiles , 1976 .

[26]  N. Jones Plastic Failure of Ductile Beams Loaded Dynamically , 1976 .

[27]  S. R. Bodner,et al.  Analysis of the mechanics of perforation of projectiles in metallic plates , 1974 .

[28]  Werner Golsdmith,et al.  Penetration and perforation processes in metal targets at and above ballistic velocities , 1971 .

[29]  C. A. Calder,et al.  Plastic deformation and perforation of thin plates resulting from projectile impact , 1971 .

[30]  Jonathan Awerbuch,et al.  A Mechanics Approach to Projectile Penetration , 1970 .

[31]  T. W. Ipson,et al.  Ballistic Perforation Dynamics , 1963 .

[32]  Geoffrey Ingram Taylor,et al.  The use of flat-ended projectiles for determining dynamic yield stress I. Theoretical considerations , 1948, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.