Numerical Analysis of Heat and Mass Transfer in Porous Media

Numerical Analysis of Mass Transfer around a Sphere Buried in Porous Media: Concentration Contours and Boundary Layer Thickness.- Unsaturated-Saturated Flow in Porous Media under Centrifugation.- Applying Computational Analysis in Studies of Resin Transfer Moulding.- Mass Transport in Growing Porous Media.- Modeling the Pore Level Fluid Flow in Porous Media using the Immersed Boundary Method.- Computer Simulation of Nanoparticles Deposition.- A Comparison of Thermal Dispersion Behaviour in High-Conductivity Porous Media of Various Pore Geometries.- Assessment of Heat Affected Zone of Submerged Arc Welding Process through Digital Image Processing.- Study of diffusion in a one-dimensional lattice-gas model of zeolites: The analytical approach and kinetic Monte Carlo simulations.- Contaminant transport in partially saturated porous.- Three-dimensional diffusion in arbitrary domain using generalized coordinates for the boundary condition of the first kind.- Convection and heat transfer of viscoelastic fluids saturated a porous medium.- Unsteady Heat Conduction from Spheroids.

[1]  A. Hunt,et al.  Dispersion of solutes in porous media , 2011 .

[2]  Akbar Shojaei,et al.  A numerical study of filling process through multilayer preforms in resin injection/compression molding , 2006 .

[3]  Krishna M. Pillai,et al.  Modeling the Unsaturated Flow in Liquid Composite Molding Processes: A Review and Some Thoughts , 2004 .

[4]  Clive A. J. Fletcher,et al.  Computational Techniques for Fluid Dynamics 1: Fundamental and General Techniques , 1996 .

[5]  T. Nishimura,et al.  Mass transfer enhancement in a sinusoidal wavy channel for pulsatile flow , 1996 .

[6]  R. M. Manglik,et al.  Enhanced heat transfer due to curvature-induced lateral vortices in laminar flows in sinusoidal corrugated-plate channels , 2004 .

[7]  THE DOUBLE-DECOMPOSITION CONCEPT FOR TURBULENT TRANSPORT IN POROUS MEDIA , 2005 .

[8]  Chi-Chang Wang,et al.  FORCED CONVECTION IN A WAVY-WALL CHANNEL , 2002 .

[9]  Christophe Binetruy,et al.  Dynamic void content prediction during radial injection in liquid composite molding , 2008 .

[10]  Marcelo J.S. de Lemos,et al.  Turbulence in Porous Media: Modeling and Applications , 2006 .

[11]  Weeratunge Malalasekera,et al.  An introduction to computational fluid dynamics - the finite volume method , 2007 .

[12]  S. Advani,et al.  Transport Phenomena in Liquid Composites Molding Processes and their Roles in Process Control and Optimization , 2005 .

[13]  Andrey V. Kuznetsov,et al.  HEAT TRANSFER IN BIDISPERSE POROUS MEDIA , 2005 .

[14]  S. Vanka,et al.  Convective heat transfer in periodic wavy passages , 1995 .

[15]  Jacob H. Masliyah,et al.  Dispersion in Porous Media , 2005 .

[16]  I. Pop,et al.  CONVECTIVE HEAT FLOW FROM SUDDENLY HEATED SURFACES EMBEDDED IN POROUS MEDIA , 1998 .

[17]  Massoud Kaviany,et al.  Principles of convective heat transfer , 2001 .

[18]  Rahul Vallabh,et al.  New Approach for Determining Tortuosity in Fibrous Porous Media , 2010 .

[19]  Richard S. Parnas,et al.  The effect of heterogeneous porous media on mold filling in resin transfer molding , 1991 .

[20]  Malcolm R. Mackley,et al.  Heat transfer and associated energy dissipation for oscillatory flow in baffled tubes , 1995 .

[21]  A. Bejan,et al.  Convection in Porous Media , 1992 .

[22]  S. Advani,et al.  Permeability estimation algorithm to simultaneously characterize the distribution media and the fabric preform in vacuum assisted resin transfer molding process , 2005 .

[23]  Timothy G. Gutowski,et al.  The Consolidation of Laminate Composites , 1987 .

[24]  B J Bellhouse,et al.  A HIGH EFFICIENCY MEMBRANE OXYGENATOR AND PULSATILE PUMPING SYSTEM, AND ITS APPLICATION TO ANIMAL TRIALS , 1973, Transactions - American Society for Artificial Internal Organs.

[25]  Clive A. J. Fletcher,et al.  Computational Techniques for Fluid Dynamics: Specific Techniques for Different Flow Categories , 1990 .

[26]  Frederick R. Phelan,et al.  Simulation of the injection process in resin transfer molding , 1997 .

[27]  R. Mckibbin,et al.  MATHEMATICAL MODELS FOR HEAT AND MASS TRANSPORT IN GEOTHERMAL SYSTEMS , 1998 .

[28]  Wen-Quan Tao,et al.  Numerical prediction for laminar forced convection heat transfer in parallel-plate channels with streamwise-periodic rod disturbances , 1998 .

[29]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[30]  I. Pop,et al.  Local thermal non-equilibrium in porous medium convection , 2005 .

[31]  C. K. Chen,et al.  TRANSPORT PHENOMENA IN ENCLOSED POROUS CAVITIES , 1998 .

[32]  A. Todoroki,et al.  Full-field monitoring of resin flow using an area-sensor array in a VaRTM process , 2011 .

[33]  T. Nishimura,et al.  Vortices and wall shear stresses in asymmetric and symmetric channels with sinusoidal wavy walls for pulsatile flow at low Reynolds numbers , 1998 .

[34]  E. Magyari,et al.  Effect of Viscous Dissipation on the Flow in Fluid Saturated Porous Media , 2005 .

[35]  Liu Yi,et al.  Study on void formation in multi-layer woven fabrics , 2004 .

[36]  Nathan Ida,et al.  Introduction to the Finite Element Method , 1997 .

[37]  Kevin D Potter,et al.  The early history of the resin transfer moulding process for aerospace applications , 1999 .

[38]  Simon Bickerton,et al.  Modeling forces generated within rigid liquid composite molding tools. Part B: Numerical analysis , 2007 .

[39]  Chia-Jung Hsu.  Numerical Heat Transfer and Fluid Flow , 1981 .

[40]  Joel H. Ferziger,et al.  Computational methods for fluid dynamics , 1996 .

[41]  COMPOSITE MATERIALS HANDBOOK VOLUME 3. POLYMER MATRIX COMPOSITES , 1997 .

[42]  Y. Wan,et al.  Preparation and mechanical properties of 3-D braided glass fiber reinforced light-cured resin composites , 2006 .

[43]  Pradip Majumdar,et al.  Computational Methods For Heat And Mass Transfer , 2005 .

[44]  Larry Lessard,et al.  An experimental investigation of class A surface finish of composites made by the resin transfer molding process , 2007 .

[45]  Ben Wang,et al.  Flow modeling and simulation of SCRIMP for composites manufacturing , 2000 .

[46]  S. Bossuyt,et al.  A reference specimen for permeability measurements of fibrous reinforcements for RTM , 2009 .

[47]  S. Tsai,et al.  Composite Materials: Design and Applications , 2002 .

[48]  D. Nield.  Modelling Fluid Flow in Saturated Porous Media and at Interfaces , 2002 .

[49]  M. Maeda,et al.  [Heat conduction]. , 1972, Kango kyoshitsu. [Nursing classroom].

[50]  Li-Yu Daisy Liu,et al.  Effect of physicochemical structure of natural fiber on transverse thermal conductivity of unidirectional abaca/bamboo fiber composites , 2012 .

[51]  Ben Wang,et al.  A Finite Element-based Heuristic Estimation of Local Preform Permeability for Resin Transfer Molding , 2009 .

[52]  A. Mojtabi,et al.  Double-Diffusive Convection in Porous Media , 2000 .

[53]  J. Delgado.  Longitudinal and Transverse Dispersion in Porous Media , 2007 .

[54]  A. J. Salazar,et al.  Modeling the disintegration of modulated liquid jets using volume-of-fluid (VOF) methodology , 2011 .

[55]  Estefania Lopez Lopez.  what is computational engineering , 2014 .

[56]  S. Tawfik,et al.  Polymeric composites based on polystyrene and cement dust wastes , 2011 .

[57]  Chin Tsau Hsu,et al.  Dynamic Modeling of Convective Heat Transfer in Porous Media , 2005 .

[58]  Enhancements of the simulation method on the edge effect in resin transfer molding processes , 2008 .

[59]  Enrico Nobile,et al.  Numerical analysis of fluid flow and heat transfer in periodic wavy channels , 2001 .

[60]  Andrew C. Long,et al.  Analysis of the vacuum infusion moulding process: I. Analytical formulation , 2005 .

[61]  A. Behie,et al.  Multiphase Flow in Porous Media , 1988 .

[62]  Norman Epstein,et al.  On tortuosity and the tortuosity factor in flow and diffusion through porous media , 1989 .

[63]  K. Vafai,et al.  NON-DARCIAN EFFECTS IN CONFINED FORCED CONVECTIVE FLOWS , 1998 .

[64]  R. M. Manglik,et al.  Effect of fin waviness and spacing on the lateral vortex structure and laminar heat transfer in wavy-plate-fin cores , 2004 .

[65]  K. Gamstedt,et al.  Characterization of interfacial stress transfer ability of particulate cellulose composite materials , 2011 .

[66]  J. L. Lage,et al.  FROM CONTINUUM TO POROUS–CONTINUUM: THE VISUAL RESOLUTION IMPACT ON MODELING NATURAL CONVECTION IN HETEROGENEOUS MEDIA , 2005 .

[67]  Metal Foams Design for Heat Exchangers: Structure and Effectives Transport Properties , 2012 .

[68]  Chaoyang Wang.  MODELING MULTIPHASE FLOW AND TRANSPORT IN POROUS MEDIA , 1998 .

[69]  Mica Grujicic,et al.  Non-isothermal preform infiltration during the vacuum-assisted resin transfer molding (VARTM) process , 2005 .

[70]  J. L. Lage.  THE FUNDAMENTAL THEORY OF FLOW THROUGH PERMEABLE MEDIA FROM DARCY TO TURBULENCE , 1998 .

[71]  Edu Ruiz,et al.  Porosity reduction using optimized flow velocity in Resin Transfer Molding , 2008 .

[72]  J. Bear.  Dynamics of Fluids in Porous Media , 1975 .

[73]  Ben Wang,et al.  Statistical characterization and robust design of RTM processes , 2005 .