Fundamental aspects of the hydromechanical behaviour of Callovo-Oxfordian claystone: From experimental studies to model calibration and validation

Abstract Within the framework of feasibility studies for a reversible, deep geological repository of high- and intermediate-level long-lived radioactive waste (HLW, IL-LLW), the French National Radioactive Waste Management Agency (Andra) is investigating the Callovo-Oxfordian (COx) claystone formation near Bure (northeast France) as a potential host formation for the repository. In 2000, Andra initiated construction of the Meuse Haute-Marne Underground Research Laboratory (MHM URL). Concurrently with on-site construction work, an extensive research program has been conducted, including theoretical and experimental studies and constitutive modelling. In-situ experiments provide an extensive data set for performance evaluation of models describing the thermo-hydro-mechanical behaviour of COx claystone under different conditions (excavation, heat, etc.). In 2012, a benchmark exercise was initiated to evaluate proposed models, including basic assumptions, mathematical descriptions, input variables and parameters, and to determine how these assumptions influence model outcomes with respect to in-situ experimental observations. The present paper outlines the main features of the hydromechanical behaviour of COx claystone and presents a series of laboratory test results (triaxial compression and creep tests) providing model development teams with a coherent database for model calibration and validation.

[1]  Jian-Fu Shao,et al.  A micromechanical model for the elasto-viscoplastic and damage behavior of a cohesive geomaterial , 2008 .

[2]  A. Vinsot,et al.  In situ characterization of the Callovo-Oxfordian pore water composition , 2008 .

[3]  Michel Bornert,et al.  Multiscale Full‐Field Strain Measurements for Micromechanical Investigations of the Hydromechanical Behaviour of Clayey Rocks , 2010 .

[4]  Frédéric Villiéras,et al.  Mineralogy, texture and porosity of Callovo-Oxfordian argillites of the Meuse/Haute-Marne region (eastern Paris Basin) , 2007 .

[5]  F. Pellet,et al.  Creep and time-dependent damage in argillaceous rocks , 2006 .

[6]  O. Vincké,et al.  Poroelastic parameters of Meuse/Haute Marne argillites: effect of loading and saturation states , 2004 .

[7]  Scott Altmann,et al.  Effects of mineral distribution at mesoscopic scale on solute diffusion in a clay‐rich rock: Example of the Callovo‐Oxfordian mudstone (Bure, France) , 2012 .

[8]  L. R. Van Loon,et al.  Preferred orientations and anisotropy in shales: Callovo-Oxfordian shale (France) and Opalinus Clay (Switzerland) , 2008 .

[9]  Jean-Dominique Barnichon,et al.  Observations and predictions of hydromechanical coupling effects in the Boom clay, Mol Underground Research Laboratory, Belgium , 2003 .

[10]  Marc Distinguin,et al.  Determination of hydraulic properties of the Callovo-Oxfordian argillite at the bure site: Synthesis of the results obtained in deep boreholes using several in situ investigation techniques , 2007 .

[11]  Jian-Fu Shao,et al.  Pétrofabrique et propriétés mécaniques des argilites , 2006 .

[12]  Jean Desroches,et al.  Complete in situ stress determination in an argillite sedimentary formation , 2007 .

[13]  Christophe Tournassat,et al.  A robust model for pore-water chemistry of clayrock , 2009 .

[14]  B. Yven,et al.  Upscaling the porosity of the Callovo-Oxfordian mudstone from the pore scale to the formation scale; insights from the 3H-PMMA autoradiography technique and SEM BSE imaging , 2015 .

[15]  Florian Amann,et al.  Dependency of Deformability, Strength and Failure Characteristics of Clay Shales on Total Suction , 2014 .

[16]  Sandra Escoffier.  Caractérisation expérimentale du comportement hydromécanique des argilites de Meuse/Haute-Marne , 2002 .

[17]  Michel Bornert,et al.  Micro-Scale Experimental Investigation of Deformation and Damage of Argillaceous Rocks under Hydric and Mechanical Loads , 2013 .

[18]  Russell T. Ewy,et al.  Shale/claystone response to air and liquid exposure, and implications for handling, sampling and testing , 2015 .

[19]  Christophe Tournassat,et al.  Mineralogical and isotopic record of biotic and abiotic diagenesis of the Callovian-Oxfordian clayey formation of Bure (France) , 2011 .

[20]  E. T. Brown,et al.  EMPIRICAL STRENGTH CRITERION FOR ROCK MASSES , 1980 .

[21]  Françoise Homand,et al.  Saturated and unsaturated behaviour modelling of Meuse–Haute/Marne argillite , 2007 .

[22]  P. Berest,et al.  Creep behavior of Bure clayey rock , 2004 .

[23]  J. Shao,et al.  Effect of water content and structural anisotropy on mechanical property of claystone , 2012 .

[24]  J. Zghondi,et al.  Short- and long-term behaviors of drifts in the Callovo-Oxfordian claystone at the Meuse/Haute-Marne Underground Research Laboratory , 2013 .

[25]  Jean Talandier,et al.  Multi-scale pore structure of COx claystone: Towards the prediction of fluid transport , 2015 .

[26]  Gilles Armand,et al.  Pore Pressure Change During the Excavation of Deep Tunnels in the Callovo Oxfordian Claystone , 2015 .

[27]  Justo Cabrera,et al.  Hydro‐Mechanical Response of the Tournemire Argillite to the Underground Openings Excavation: Unsaturated Zones and Mine‐by‐test Experiment , 2013 .

[28]  Jian-Fu Shao,et al.  Modeling of elastoplastic damage behavior of a claystone , 2003 .

[29]  Olivier Buzzi,et al.  The place of expansive clays in the framework of unsaturated soil mechanics. , 2009 .

[30]  Gilles Armand,et al.  “Transverse Action” – A model benchmark exercise for numerical analysis of the Callovo-Oxfordian claystone hydromechanical response to excavation operations , 2017 .

[31]  G. Armand,et al.  Geometry and Properties of the Excavation-Induced Fractures at the Meuse/Haute-Marne URL Drifts , 2013, Rock Mechanics and Rock Engineering.