Challenges and opportunities for Solar Tower technology in India

Solar Tower technology has gained considerable momentum over the past decade. Unlike the parabolic trough, Solar Tower has a lot of variants in terms of type of receivers, working fluids, power cycles, size of heliostats, etc. Most of the literature available on this technology does not address in great depths, details of various parameters associated with tower technology. A detailed examination of plant parameters is required in order to perform a potential assessment, design basis or feasibility analysis. This paper aims to assess the principal parameters of existing plants, namely, solar to electric conversion efficiency, mirror and land area per MWe of equivalent capacity, packing density, field layout configuration, receiver size, tower height and gross costs of plants, wherever data is available. Based on this global review of existing plants, it is observed that, the annual solar to electric conversion efficiencies has an average value of 16% and the packing density has an average value of about 20%. Since most of the existing plants have been constructed for demonstration purposes, the true potential of this technology has not yet been realised. Using this assessment as a basis, the technical, financial and policy drivers and barriers for adopting tower technology in India are discussed. It is seen that based on indigenisation prospects, tower technology with external cylindrical or cavity receivers with storage could be adopted. The role and significance of this technology is brought out in the context of the Jawaharlal Nehru National Solar Mission (JNNSM) in order to achieve grid-connected solar power. It is estimated that around 1800MW of grid connected Solar Tower plants could come up under this mission by 2022.

[1]  D. Wasyluk,et al.  eSolar's Modular, Scalable Molten Salt Power Tower Reference Plant Design , 2014 .

[2]  Prashant Baredar,et al.  Status of solar wind renewable energy in India , 2013 .

[3]  Matthias Hänel,et al.  Jülich Solar Power Tower—Experimental Evaluation of the Storage Subsystem and Performance Calculation , 2011 .

[4]  L. L. vant-Hull,et al.  The Role of “Allowable Flux Density” in the Design and Operation of Molten-Salt Solar Central Receivers , 2001 .

[5]  K R Williams,et al.  Power from the sun , 1979 .

[6]  Jesús Ballestrín,et al.  Solar radiation attenuation in solar tower plants , 2012 .

[7]  Huili Zhang,et al.  Concentrated solar power plants: Review and design methodology , 2013 .

[8]  Qiang Yu,et al.  Modeling and simulation of 1 MW DAHAN solar thermal power tower plant , 2011 .

[9]  P. K. Joshi,et al.  Solar power potential mapping in India using remote sensing inputs and environmental parameters , 2014 .

[10]  S. C. Kaushik,et al.  State-of-the-art of solar thermal power plants—A review , 2013 .

[11]  Anuj Mathur,et al.  Techno-economic analysis of solar photovoltaic power plant for garment zone of Jaipur city , 2014 .

[12]  M. Súri,et al.  SATELLITE-BASED SOLAR RESOURCE DATA: MODEL VALIDATION STATISTICS VERSUS USER'S UNCERTAINTY , 2014 .

[13]  Miriam Ebert,et al.  Solugas – Operation Experience of the First Solar Hybrid Gas Turbine System at MW Scale , 2014 .

[14]  Peter Schwarzbözl,et al.  The Solar Tower Jülich - A Research and Demonstration Plant for Central Receiver Systems , 2009 .

[15]  Manuel Romero,et al.  An Update on Solar Central Receiver Systems, Projects, and Technologies , 2002 .