The MITC4+ shell element and its performance

[1]  Phill-Seung Lee,et al.  The MITC3+shell element and its performance , 2014 .

[2]  Klaus-Jürgen Bathe,et al.  3D-shell elements for structures in large strains , 2013 .

[3]  Kyungho Yoon,et al.  Improving the MITC3 shell finite element by using the Hellinger-Reissner principle , 2012 .

[4]  G. Prathap.  The Finite Element Method in Structural Mechanics: Principles And Practice Of Design Of Field-Consistent Elements For Structural And Solid Mechanics , 2010 .

[5]  Phill-Seung Lee,et al.  The quadratic MITC plate and MITC shell elements in plate bending , 2010, Adv. Eng. Softw..

[6]  Klaus-Jürgen Bathe,et al.  A triangular six-node shell element , 2009 .

[7]  Dominique Chapelle,et al.  Towards improving the MITC6 triangular shell element , 2007 .

[8]  Victoria Vampa,et al.  ANALYSIS OF IN-LAYER STRAINS IN THE LOW ORDER MITC SHELL ELEMENT , 2007 .

[9]  Manfred Bischoff,et al.  The discrete strain gap method and membrane locking , 2005 .

[10]  Phill-Seung Lee,et al.  Insight into finite element shell discretizations by use of the basic shell mathematical model , 2005 .

[11]  K. Bathe,et al.  Development of MITC isotropic triangular shell finite elements , 2004 .

[12]  Phill-Seung Lee,et al.  Towards improving the MITC9 shell element , 2003 .

[13]  K. Bathe,et al.  Measuring convergence of mixed finite element discretizations: an application to shell structures , 2003 .

[14]  D. Chapelle,et al.  The Finite Element Analysis of Shells - Fundamentals , 2003 .

[15]  Phill-Seung Lee,et al.  On the asymptotic behavior of shell structures and the evaluation in finite element solutions , 2002 .

[16]  Klaus-Jürgen Bathe,et al.  The inf–sup condition and its evaluation for mixed finite element methods , 2001 .

[17]  Alexander G Iosilevich,et al.  An inf-sup test for shell finite elements , 2000 .

[18]  Alexander G Iosilevich,et al.  An evaluation of the MITC shell elements , 2000 .

[19]  K. Bathe,et al.  Fundamental considerations for the finite element analysis of shell structures , 1998 .

[20]  M. L. Bucalem,et al.  Finite element analysis of shell structures , 1997 .

[21]  Klaus-Jürgen Bathe,et al.  Locking Behavior of Isoparametric Curved Beam Finite Elements , 1995 .

[22]  K. Bathe.  Finite Element Procedures , 1995 .

[23]  T. Belytschko,et al.  Projection schemes for one-point quadrature shell elements , 1994 .

[24]  C. Choi,et al.  An Efficient Four Node Degenerated Shell Element Based on the Assumed Covariant Strain , 1994 .

[25]  T. Belytschko,et al.  Physical stabilization of the 4-node shell element with one point quadrature , 1994 .

[26]  M. L. Bucalém,et al.  Higher‐order MITC general shell elements , 1993 .

[27]  J. Pitkäranta.  The problem of membrane locking in finite element analysis of cylindrical shells , 1992 .

[28]  J. C. Simo,et al.  A CLASS OF MIXED ASSUMED STRAIN METHODS AND THE METHOD OF INCOMPATIBLE MODES , 1990 .

[29]  Eduardo N. Dvorkin,et al.  A quadrilateral 2‐D finite element based on mixed interpolation of tensorial components , 1989 .

[30]  Eduardo N. Dvorkin,et al.  A formulation of general shell elements—the use of mixed interpolation of tensorial components† , 1986 .

[31]  K. Bathe,et al.  A continuum mechanics based four‐node shell element for general non‐linear analysis , 1984 .

[32]  T. Belytschko,et al.  A stabilization procedure for the quadrilateral plate element with one-point quadrature , 1983 .

[33]  Klaus-Jürgen Bathe,et al.  A study of three‐node triangular plate bending elements , 1980 .

[34]  Robert D. Cook,et al.  Improved Two-Dimensional Finite Element , 1974 .