论文信息 - The Flywheel Energy Storage with Brushless DC Motor - the Practical Results

The Flywheel Energy Storage with Brushless DC Motor - the Practical Results

This paper presents the results of research of the rotating energy accumulator. In the study the brushless DC motor with permanent magnet (PN=2,98 kW) was used as the motor-generator. The rotating mass made up the steel pipe. This accumulator stored about 4 MJ kinetic energy. The rotation speed was 6000 rpm. The inverter was constructed from intelligent power modules. The control of this one is based on module with FPGA and DSP

S. Pirog | T. Siostrzonek

[1] Martin Jadrić,et al. Start-up of Sensorless Brushless DC Motor Based on Open Phase Voltage Measurement , 2003 .

[2] Yen-Shin Lai,et al. New initial position detection technique for three-phase brushless DC motor without position and current sensors , 2002 .

[3] Juan Dixon,et al. Current control strategy for brushless DC motors based on a common DC signal , 2002 .

[4] Hung-Chi Chen,et al. Current-mode control for sensorless BDCM drive with intelligent commutation tuning , 2002 .

[5] Kuang-Yao Cheng,et al. Design of a sensorless commutation IC for BLDC motors , 2003 .