Thermal boundary conductance of transition metals on diamond

An experimental process that was used to obtain a direct measurement of thermal boundary conductance (TBC) between a diamond substrate and several transition metals, deposited by sputtering, is des...

[1]  L. Weber,et al.  On the influence of active element content on the thermal conductivity and thermal expansion of Cu-X (X = Cr, B) diamond composites , 2007 .

[2]  Hiroshi Kawarada,et al.  Hydrogen-terminated diamond surfaces and interfaces , 1996 .

[3]  Gang Chen,et al.  Ballistic-Diffusive Equations for Transient Heat Conduction From Nano to Macroscales , 2002 .

[4]  A. Mortensen,et al.  Thermal conductivity and interfacial conductance of AlN particle reinforced metal matrix composites , 2011 .

[5]  A. Majumdar,et al.  Thermometry and Thermal Transport in Micro/Nanoscale Solid-State Devices and Structures , 2002 .

[6]  J. Molina,et al.  Assessing predictive schemes for thermal conductivity against diamond-reinforced silver matrix composites at intermediate phase contrast , 2007 .

[7]  B. Kieback,et al.  Interfacial characterization of Cu/diamond composites prepared by powder metallurgy for heat sink applications , 2008 .

[8]  C. Zweben Advances in composite materials for thermal management in electronic packaging , 1998 .

[9]  M. Efremov,et al.  Real-time heat capacity measurement during thin-film deposition by scanning nanocalorimetry , 2002 .

[10]  Dominique Drouin,et al.  CASINO V2.42: a fast and easy-to-use modeling tool for scanning electron microscopy and microanalysis users. , 2007, Scanning.

[11]  S. Kearney,et al.  Criteria for Cross-Plane Dominated Thermal Transport in Multilayer Thin Film Systems During Modulated Laser Heating , 2010 .

[12]  Young,et al.  Lattice-dynamical calculation of the Kapitza resistance between fcc lattices. , 1989, Physical review. B, Condensed matter.

[13]  T. Ando,et al.  Surface potential change by oxidation of the chemical vapor deposited diamond (001) surface , 2007 .

[14]  G Chen,et al.  Ballistic-diffusive heat-conduction equations. , 2001, Physical review letters.

[15]  L. Hector,et al.  Hydrogen effect on adhesion and adhesive transfer at aluminum/diamond interfaces , 2003 .

[16]  Construction and characterization of a sputter deposition system for coating granular materials , 2009 .

[17]  L. Weber,et al.  Diamond-Based Metal Matrix Composites for Thermal Management Made by Liquid Metal Infiltration — Potential and Limits , 2008 .

[18]  M. D. Thouless,et al.  Growth and configurational stability of circular, buckling-driven film delaminations , 1992 .

[19]  Patrick E. Hopkins,et al.  Influence of Inelastic Scattering at Metal-Dielectric Interfaces , 2008 .

[20]  Thomsen,et al.  Surface generation and detection of phonons by picosecond light pulses. , 1986, Physical review. B, Condensed matter.

[21]  Gang Chen,et al.  Pulse accumulation, radial heat conduction, and anisotropic thermal conductivity in pump-probe transient thermoreflectance. , 2008, The Review of scientific instruments.

[22]  Jianguo Zhu,et al.  Magnetic flux penetration in polycrystalline SmFeO0.75F0.2As , 2010 .

[23]  Gang Chen,et al.  Thermal conductance and phonon transmissivity of metal–graphite interfaces , 2010 .

[24]  Anthony G. Evans,et al.  The characterization of telephone cord buckling of compressed thin films on substrates , 2002 .

[25]  Y. Gotoh,et al.  インコメンシュレート複合結晶(Sr 2 Cu 2 O 3 ) 0.70 CuO 2 の構造変調,正孔分布及び正孔秩序化構造 , 2003 .

[26]  J. Keckes,et al.  Modification of wetting of copper (Cu) on carbon (C) by plasma treatment and molybdenum (Mo) interlayers , 2006 .

[27]  P. Hopkins,et al.  Temperature-Dependent Thermal Boundary Conductance at Al/Al2O3 and Pt/Al2O3 interfaces , 2007 .

[28]  D. Cahill,et al.  Thermal Conductance of metal-metal interfaces , 2005 .

[29]  Carl Zweben,et al.  Advances in high-performance thermal management materials : A review , 2007 .

[30]  Ravi Prasher,et al.  Acoustic mismatch model for thermal contact resistance of van der Waals contacts , 2009 .

[31]  Katsuhito Yoshida,et al.  Thermal properties of diamond/copper composite material , 2004, Microelectron. Reliab..

[32]  S. Kidalov,et al.  High thermal conductivity composites consisting of diamond filler with tungsten coating and copper (silver) matrix , 2011 .

[33]  Patrick E. Hopkins,et al.  Effects of surface roughness and oxide layer on the thermal boundary conductance at aluminum/silicon interfaces , 2010 .

[34]  Hugh O. Pierson,et al.  Handbook of Refractory Carbides and Nitrides: Properties, Characteristics, Processing and Applications , 1996 .

[35]  M. Stöger-Pollach,et al.  Molybdenum interlayers as adhesion promotors for thin copper films on plasma treated glassy carbon , 2006 .

[36]  Xiaodong Li,et al.  Adhesion at Diamond /Metal Interfaces: A Density Functional Theory Study , 2010 .

[37]  D. Cahill,et al.  Thermal conductance of epitaxial interfaces , 2003 .

[38]  Paul Munroe,et al.  Three-Dimensional Microstructural Characterization Using Focused Ion Beam Tomography , 2007 .

[39]  A. Smith,et al.  Measurement of Thermal Boundary Conductance of a Series of Metal-Dielectric Interfaces by the Transient Thermoreflectance Technique , 2005 .

[40]  A. Majumdar,et al.  Nanoscale thermal transport , 2003, Journal of Applied Physics.

[41]  B. Kieback,et al.  Interfacial design of Cu-based composites prepared by powder metallurgy for heat sink applications , 2008 .

[42]  L. Weber,et al.  Surface Modification of Diamonds in Diamond/Al-Matrix Composite , 2008 .

[43]  U. E. Klotz,et al.  Interface formation in infiltrated Al(Si)/diamond composites , 2006 .

[44]  Kikuo Ujihara Reflectivity of Metals at High Temperatures , 1972 .

[45]  Oxygen-induced surface state on diamond (100) , 2001 .

[46]  Xing Zhang,et al.  Prediction of size effect on thermal conductivity of nanoscale metallic films , 2009 .

[47]  P. Ruch,et al.  Effect of diamond crystallographic orientation on dissolution and carbide formation in contact with liquid aluminium , 2006 .

[48]  D. Cahill,et al.  Thermal conductance of interfaces between highly dissimilar materials , 2006 .

[49]  M. Kasu,et al.  Origin of Schottky Barrier Modification by Hydrogen on Diamond , 2009 .

[50]  H. Maris,et al.  Kapitza conductance and heat flow between solids at temperatures from 50 to 300 K. , 1993, Physical review. B, Condensed matter.

[51]  Gang Chen,et al.  Effects of surface chemistry on thermal conductance at aluminum–diamond interfaces , 2010 .

[52]  D. Hasselman,et al.  Effective Thermal Conductivity of Composites with Interfacial Thermal Barrier Resistance , 1987 .

[53]  J. Molina,et al.  Thermal conductivity of aluminum matrix composites reinforced with mixtures of diamond and SiC particles , 2008 .

[54]  D. Cahill Analysis of heat flow in layered structures for time-domain thermoreflectance , 2004 .

[55]  Clemens,et al.  Time-resolved thermal transport in compositionally modulated metal films. , 1988, Physical review. B, Condensed matter.

[56]  H. Kawarada,et al.  Properties of metal/diamond interfaces and effects of oxygen adsorbed onto diamond surface , 1991 .

[57]  T. Ando,et al.  Surface conductivity change by oxidation of the homoepitaxially grown diamond (100) surface , 2007 .

[58]  Xuan Zheng,et al.  Two-tint pump-probe measurements using a femtosecond laser oscillator and sharp-edged optical filters. , 2008, The Review of scientific instruments.

[59]  N. G. Semaltianos,et al.  Single-pulse drilling study on Au, Al and Ti alloy by using a picosecond laser , 2009 .

[60]  H. Maris,et al.  Picosecond ultrasonics study of the modification of interfacial bonding by ion implantation , 1998 .