Optimization of piezoelectric sensor location for delamination detection in composite laminates

The optimal placement of sensors is a critical issue in detecting damage in laminated composite structures. The aim is to use a minimum number of sensors, placed at the correct locations, so that the voltage signals received from the sensor set can be used to detect both the presence and the extent of damage. In this study, an optimization procedure is developed to detect arbitrarily located discrete delamination in composite plates using distributed piezoelectric sensors. The probability of damage distribution in the plate is determined using a statistical model. A genetic algorithm (GA) is used to detect the number and location of the sensors. The analysis uses a Monte Carlo method to generate the initial population. The simulation and signal processing is performed using a finite element procedure based on the refined layer-wise theory, which is capable of modelling ply-level stresses, and seeded delaminations are modelled with Heaviside step functions. A two-way electromechanical coupled field formulation is used to describe the induced strain. The objective function is a damage index which compares the voltage signals from a healthy (no delamination) and a statistically determined delaminated model. The voltage signals are affected by the local changes in the strain induced by the presence of delamination. The optimization solutions are verified by numerical simulation as well as with experiments conducted using customized piezoelectric sensors and a laser scanning vibrometer. The results presented show that the optimum sensor pattern is capable of detecting discrete seeded delaminations in moderately thick composite plates.

[1]  Anindya Ghoshal,et al.  Characterization of delamination effect on composite laminates using a new generalized layerwise approach , 2003 .

[2]  Kuen Y. Lin,et al.  Bayesian Updating of Damage Size Probabilities for Aircraft Structural Life-Cycle Management , 2001 .

[3]  Anindya Ghoshal,et al.  Characterization of Delamination by Using Damage Indices , 2003 .

[4]  D. Satpathi,et al.  Optimal transducer placement for health monitoring of long span bridge , 1997 .

[5]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .

[6]  István Manno,et al.  Introduction to the Monte-Carlo Method , 1999 .

[7]  Raymond R. Hill.  A Monte-Carlo study of genetic algorithm initial population generation methods , 1999, WSC '99.

[8]  S. M. Joshi,et al.  Sensor/Actuator Placement for Flexible Space Structures , 1990, 1990 American Control Conference.

[9]  F. Udwadia.  Methodology for Optimum Sensor Locations for Parameter Identification in Dynamic Systems , 1994 .

[10]  Aditi Chattopadhyay,et al.  Optimal Sensor Placement for Damage Characterization using Genetic Algorithms , 2004 .

[11]  Matthew P. Cartmell,et al.  Genetic algorithms in health monitoring of structures , 2001 .

[12]  Ning Hu,et al.  Structural damage identification using piezoelectric sensors , 2002 .

[13]  Seamus D. Garvey,et al.  A COMBINED GENETIC AND EIGENSENSITIVITY ALGORITHM FOR THE LOCATION OF DAMAGE IN STRUCTURES , 1998 .

[14]  Richard L. Scheaffer,et al.  Probability and statistics for engineers , 1986 .

[15]  S. O. Reza Moheimani,et al.  An optimization approach to optimal placement of collocated piezoelectric actuators and sensors on a thin plate , 2003 .

[16]  Anindya Ghoshal,et al.  Dynamic Analysis of Composite Laminates with Multiple Delamination Using Improved Layerwise Theory , 2003 .

[17]  K. Lim.  Method for Optimal Actuator and Sensor Placement for Large Flexible Structures , 1992 .

[18]  Fu-Kuo Chang,et al.  Identifying Delamination in Composite Beams Using Built-In Piezoelectrics: Part I—Experiments and Analysis , 1995 .

[19]  Xiao Ru-cheng.  Identification of damage in structures using genetic algorithms and programming , 2007 .

[20]  W. Staszewski,et al.  Impact damage location in composite structures using optimized sensor triangulation procedure , 2003 .

[21]  Anindya Ghoshal,et al.  A continuous sensor for damage detection in bars , 2002 .

[22]  Keith Worden,et al.  Overview of optimal sensor location methods for damage detection , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[23]  Makola M. Abdullah,et al.  Placement of sensors/actuators on civil structures using genetic algorithms , 2001 .