Application of discrete element method to Superpave gyratory compaction

Superpave mix design method is one of the major asphalt mixture design methods and has been widely used worldwide. However, the Superpave laboratory mix design process is time-consuming and requires significant human and material resources. In this study, the discrete element method (DEM) was used to simulate the compaction of hot-mix asphalt (HMA) with the Superpave gyratory compactor (SGC). The open source DEM code, YADE, was modified and implemented with C++programming language to conduct virtual SGC compaction. The effects of aggregate gradation, gyration number, gyration angle, and parameters of contact model during the SGC compaction were investigated. Also, the clump technique was utilised to study the effect of aggregate shape. To verify the DEM simulation results, a laboratory SGC compaction was conducted. The results from the DEM virtual compaction were generally in agreement with the experimental data, indicating that DEM provides a feasible way to simulate asphalt mixture compaction. With further research, DEM has the potential to be a helpful tool for aggregate selection in asphalt mix design.

[1]  Jay N. Meegoda,et al.  Modeling Viscoelastic Behavior of Hot Mix Asphalt ( HMA ) Using Discrete Element Methods , 1994 .

[2]  Yu Liu,et al.  Three-Dimensional Discrete Element Simulation of Asphalt Concrete Subjected to Haversine Loading , 2010 .

[3]  E. Masad,et al.  Effects of coarse aggregate angularity and asphalt binder on laboratory-measured permanent deformation properties of HMA , 2009 .

[4]  A. Anandarajah,et al.  Three-Dimensional Discrete Element Method of Analysis of Clays , 2003 .

[5]  C. Juang,et al.  Geotechnical Special Publication , 2014 .

[6]  Zhanping You,et al.  3D discrete element models of the hollow cylindrical asphalt concrete specimens subject to the internal pressure , 2010 .

[7]  Erol Tutumluer,et al.  Effect of Coarse Aggregate Morphology on the Resilient Modulus of Hot-Mix Asphalt , 2005 .

[8]  Olga J. Pendleton,et al.  CORRELATION OF SELECTED LABORATORY COMPACTION METHODS WITH FIELD COMPACTION , 1994 .

[9]  William G. Buttlar,et al.  Application of Discrete Element Modeling Techniques to Predict the Complex Modulus of Asphalt–Aggregate Hollow Cylinders Subjected to Internal Pressure , 2005 .

[10]  Yangsheng Zhao,et al.  Numerical simulation of the top coal caving process using the discrete element method , 2009 .

[11]  Fernando Alonso-Marroquín,et al.  An efficient algorithm for granular dynamics simulations with complex-shaped objects , 2008 .

[12]  Zhanping You,et al.  Prediction of Dynamic Modulus of Asphalt Concrete using Two-Dimensional and Three-Dimensional Discrete Element Modeling Approach , 2008 .

[13]  Zhanping You,et al.  Investigating the Sensitivity of Aggregate Size within Sand Mastic by Modeling the Microstructure of an Asphalt Mixture , 2011 .

[14]  Andy Collop,et al.  Modelling dilation in an idealised asphalt mixture using discrete element modelling , 2006 .

[15]  Ala R. Abbas,et al.  Micromechanical Modeling of the Viscoelastic Behavior of Asphalt Mixtures Using the Discrete-Element Method , 2007 .

[16]  J W Hall.  Airport pavement innovations: theory to practice , 1993 .

[17]  Prithvi S. Kandhal,et al.  Hot Mix Asphalt Materials, Mixture Design and Construction , 1996 .

[18]  Yu Liu,et al.  Viscoelastic Model for Discrete Element Simulation of Asphalt Mixtures , 2009 .

[19]  Ala R. Abbas,et al.  SIMULATION OF THE MICROMECHANICAL BEHAVIOR OF ASPHALT MIXTURES USING THE DISCRETE ELEMENT METHOD , 2004 .

[20]  William G. Buttlar,et al.  Discrete Element Modeling of Asphalt Concrete: Microfabric Approach , 2001 .

[21]  M. Baucus.  Transportation Research Board , 1982 .

[22]  William G. Buttlar,et al.  Micromechanical Fracture Modeling of Asphalt Mixture Using the Discrete Element Method , 2005 .

[23]  Dong Wang,et al.  Fundamental mechanics of asphalt compaction through FEM and DEM modeling , 2007 .

[24]  Andy Collop,et al.  Discrete Element Modelling of Monotonic Compression Tests in an Idealised Asphalt Mixture , 2009 .

[25]  Andy Collop,et al.  Use of the Distinct Element Method to Model the Deformation Behavior of an Idealized Asphalt Mixture , 2004 .

[26]  J. Kozicki,et al.  A new open-source software developed for numerical simulations using discrete modeling methods , 2008 .

[27]  Eyad Masad,et al.  A thermomechanical framework for modeling the compaction of asphalt mixes , 2008 .

[28]  Hyunwook Kim,et al.  Simulation of Fracture Behavior in Asphalt Concrete Using a Heterogeneous Cohesive Zone Discrete Element Model , 2008 .

[29]  Dwayne D. Tannant,et al.  Numerical analysis of the stability of heavily jointed rock slopes using PFC2D , 2003 .

[30]  Pierre Alart,et al.  Numerical investigations of fault propagation and forced-fold using a non smooth discrete element method , 2006 .

[31]  Namunu J. Meegoda,et al.  A NOVEL APPROACH TO DEVELOP A PERFORMANCE BASED TEST FOR RUTTING OF ASPHALT CONCRETE , 1993 .

[32]  Zheng Jianlong.  ANSYS RESEARCH ON VIBRATORY COMPACTING PROCESS OF HOT ASPHALT MIXTURE PAVEMENT , 2008 .

[33]  J. Ting,et al.  Discrete numerical model for soil mechanics , 1989 .

[34]  Lanru Jing,et al.  Block system construction for three-dimensional discrete element models of fractured rocks , 2000 .

[35]  Mike Butcher.  Determining Gyratory Compaction Characteristics Using Servopac Gyratory Compactor , 1998 .

[36]  William G. Buttlar,et al.  Discrete Element Modeling to Predict the Modulus of Asphalt Concrete Mixtures , 2004 .

[37]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[38]  Habtamu Zelelew,et al.  Micromechanical Modeling of Asphalt Concrete Uniaxial Creep Using the Discrete Element Method , 2010 .

[39]  Feng Chen,et al.  Prediction/Verification of Particle Motion in One Dimension with the Discrete-Element Method , 2007 .