Flux Search Control of Field Oriented Control of Six-Phase Induction Motor supplied by SVPWM

This paper deals with the efficiency optimization of Field Oriented Control (FOC) of a six-phase induction motor supplied by Space Vector PWM (SVPWM) using the flux Search Controller (SC) technique. The proposed technique is based on controlling flux to achieve maximum efficiency at light load or low speed. Flux search controller technique is not only cost effective and easy to implement but also robust against parameter variations. Flux control algorithm in six-phase induction machine speed controller reduces 6n±1 harmonic loss as well as other losses like that of copper and core. Simulation results are carried out and they verify the effectiveness of the proposed approach. Streszczenie. Przedstawiono metode optymalizacji skuteczności sześciofazowego silnika indukcyjnego zasilanego za pośrednictwem SVPWM przy wykorzystaniu techniki SC. Metoda SC bazuje na kontroli strumienia w celu osiągniecia maksimum wydajności przy malych obciązeniach i malej predkości. Zaproponowana kontrola strumienia w silniku sześciofazowym redukuje straty. (Kontrola strumienia jako metoda optymalizacji sześciofazowego silnika indukcyjnego zasilanego za pośrednictwem SVPWM)

[1]  Gérard-André Capolino,et al.  Fuzzy Logic and Sliding-Mode Controls Applied to Six-Phase Induction Machine With Open Phases , 2010, IEEE Transactions on Industrial Electronics.

[2]  M. Nasir Uddin,et al.  Development and Implementation of a Nonlinear-Controller-Based IM Drive Incorporating Iron Loss With Parameter Uncertainties , 2009, IEEE Transactions on Industrial Electronics.

[3]  Girish Kumar Singh,et al.  A simple indirect field-oriented control scheme for multiphase induction machine , 2005, IEEE Transactions on Industrial Electronics.

[4]  Gérard-André Capolino,et al.  Modeling and Control of Six-Phase Symmetrical Induction Machine Under Fault Condition Due to Open Phases , 2008, IEEE Transactions on Industrial Electronics.

[5]  D. Hadiouche,et al.  Space-vector PWM techniques for dual three-phase AC machine: analysis, performance evaluation, and DSP implementation , 2006, IEEE Transactions on Industry Applications.

[6]  H. Razik,et al.  On the modeling and design of dual-stator windings to minimize circulating harmonic currents for VSI fed AC machines , 2004, IEEE Transactions on Industry Applications.

[7]  Demba Diallo,et al.  A Loss-Minimization DTC Scheme for EV Induction Motors , 2005, IEEE Transactions on Vehicular Technology.

[8]  F. Profumo,et al.  Digital field oriented control for dual three-phase induction motor drives , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[9]  Juan Ramón Heredia-Larrubia,et al.  Reducing Acoustic Noise Radiated by Inverter-Fed Induction Motors Controlled by a New PWM Strategy , 2010, IEEE Transactions on Industrial Electronics.

[10]  Andrea Cavagnino,et al.  Efficiency Analysis of PWM Inverter Fed Three-Phase and Dual Three-Phase High Frequency Induction Machines for Low/Medium Power Applications , 2008, IEEE Transactions on Industrial Electronics.

[11]  Jafar Soltani,et al.  Adaptive Nonlinear Direct Torque Control of Sensorless IM Drives With Efficiency Optimization , 2010, IEEE Transactions on Industrial Electronics.

[12]  Durval de Almeida Souza,et al.  Adaptive Fuzzy Controller for Efficiency Optimization of Induction Motors , 2007, IEEE Transactions on Industrial Electronics.

[13]  Frede Blaabjerg,et al.  On the energy optimized control of standard and high-efficiency induction motors in CT and HVAC applications , 1997 .

[14]  S. Williamson,et al.  Pulsating torque and losses in multiphase induction machines , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[15]  Alberto Tenconi,et al.  Dual three-phase induction motor drive with digital current control in the stationary reference frame , 1989 .

[16]  Davood Yazdani,et al.  Full Utilization of the Inverter in Split-Phase Drives by Means of a Dual Three-Phase Space Vector Classification Algorithm , 2009, IEEE Transactions on Industrial Electronics.

[17]  Andrea Cavagnino,et al.  Estimation of Iron Losses in Induction Motors: Calculation Method, Results, and Analysis , 2010, IEEE Transactions on Industrial Electronics.

[18]  Mohammad Reza Zolghadri,et al.  A Fast Flux Search Controller for DTC Based Induction Motor Drives , 2007, 2005 IEEE 36th Power Electronics Specialists Conference.

[19]  Longya Xu,et al.  A New Efficiency Optimization Method on Vector Control of Induction Motors , 2005, IEEE International Conference on Electric Machines and Drives, 2005..

[20]  Olorunfemi Ojo,et al.  Efficiency Optimizing Control of Induction Motor Using Natural Variables , 2006, IEEE Transactions on Industrial Electronics.

[21]  Abderrezak Rezzoug,et al.  A New PWM Strategy Based on a 24-Sector Vector Space Decomposition for a Six-Phase VSI-Fed Dual Stator Induction Motor , 2008, IEEE Transactions on Industrial Electronics.

[22]  M.N. Uddin,et al.  Development of a Nonlinear and Model-Based Online Loss Minimization Control of an IM Drive , 2008, IEEE Transactions on Energy Conversion.

[23]  Yifan Zhao,et al.  Space vector PWM control of dual three phase induction machine using vector space decomposition , 1994 .