High-Frequency EMI Attenuation at Source With the Auxiliary Commutated Pole Inverter

Fast-switching power converters are a key enabling technology for the more electric aircraft (MEA), but the generated electromagnetic interference (EMI) poses significant challenges to the electrification effort. To meet the stringent aerospace EMI standards, passive filters are commonly employed, despite the weight and size constraints imposed by the MEA. Alternatively, the EMI source, i.e., the high $dv\text{/} dt$ and $di\text{/} dt$ slew rates, can be addressed through waveform-shaping techniques. For example, while most soft-switching converters can reduce switching loss, they do so by switching the semiconductor devices in a slower and smoother manner, resulting in the attenuation of high-frequency harmonics. This paper examines the auxiliary commutated pole inverter (ACPI) topology, and its first contribution is the attenuation of the high-frequency content of its EMI source, that is, the output voltage, in a predictable manner, through the active control of the resonant circuit. This is achieved by first, discussing the time-domain characteristics of trapezoidal and S-shaped pulse-trains that lead to attenuated high-frequency harmonic content, and second, by analyzing the equivalent LC circuit of the ACPI. The design of the inverter is then focused on the active control of the resonant parameters, for a predetermined and enhanced output voltage high-frequency response. The second contribution of this paper is the comparison of the EMI performance of hard switching and of three soft-switching modes, fixed-timing control, variable-timing control, and capacitive turn-offs, and how this informs important metrics such as power efficiency, current stress, and implementation complexity. Finally, the third contribution is on the trade-offs that arise when the primary design goal is enhanced EMI performance as opposed to switching loss reduction. A 5-kW, 3-phase ACPI prototype is used for validating the high-frequency content attenuation at source. It is shown that the ACPI can achieve a 37 dB harmonic attenuation of its output voltage at 4 MHz, compared to a hard-switched inverter.

[1]  Thomas A. Lipo,et al.  Pulse Width Modulation for Power Converters: Principles and Practice , 2003 .

[2]  W. Marsden.  I and J , 2012 .

[3]  Yuqing Tang,et al.  Modeling-based examination of conducted EMI emissions from hard- and soft-switching PWM inverters , 1999, Conference Record of the 1999 IEEE Industry Applications Conference. Thirty-Forth IAS Annual Meeting (Cat. No.99CH36370).

[4]  Torbjörn Thiringer,et al.  Reduction of EMI in Switched Mode Converters by Shaped Pulse Transitions , 2007 .

[5]  Tao Zhang,et al.  The evaluation of control strategies for Auxiliary Resonant Commutated Pole inverter , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[6]  Bulent Sarlioglu,et al.  More Electric Aircraft: Review, Challenges, and Opportunities for Commercial Transport Aircraft , 2015, IEEE Transactions on Transportation Electrification.

[7]  M. D. Kankam,et al.  Potential starter/generator technology for future aerospace application , 1996, NAECON 1996.

[8]  Sergei Nirenburg,et al.  Generation , 2004, Machine Translation.

[9]  Krishna Shenai,et al.  Internal dynamics of IGBT under zero-voltage and zero-current switching conditions , 1999 .

[10]  Deepak Divan,et al.  The Resonant DC Link Converter--A New Concept in Static Power Conversion , 1986, 1986 Annual Meeting Industry Applications Society.

[11]  Fred C. Lee,et al.  A simplified control scheme for zero voltage transition (ZVT) inverter using coupled inductors , 2000, 2000 IEEE 31st Annual Power Electronics Specialists Conference. Conference Proceedings (Cat. No.00CH37018).

[12]  Iossif Grinbaum,et al.  Numerical simulation and measurement of common-mode and circulating bearing currents , 2016, 2016 XXII International Conference on Electrical Machines (ICEM).

[13]  Ehsan Adib,et al.  Family of Soft-Switching Single-Switch PWM Converters With Lossless Passive Snubber , 2015, IEEE Transactions on Industrial Electronics.

[14]  R. M. Nelms,et al.  State plane analysis of an auxiliary resonant commutated pole inverter and implementation with load current adaptive fixed timing control , 2002, IEEE 2002 28th Annual Conference of the Industrial Electronics Society. IECON 02.

[15]  Volker Pickert,et al.  Three-phase soft-switching voltage source converters for motor drives. Part 1 : Overview and analysis , 1999 .

[16]  Dehong Xu,et al.  Design methodology of resonant inductor in a ZVS inverter , 2014, 2014 IEEE 5th International Symposium on Power Electronics for Distributed Generation Systems (PEDG).

[17]  Clayton R. Paul,et al.  Diagnosis and reduction of conducted noise emissions , 1988, IEEE 1988 International Symposium on Electromagnetic Compatibility.

[18]  W. McMurray,et al.  Resonant snubbers with auxiliary switches , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[19]  Baoquan Kou,et al.  An improved control scheme for single-phase auxiliary resonant snubber inverter , 2016, 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia).

[20]  Tore Undeland,et al.  Power Electronics: Converters, Applications and Design , 1989 .

[21]  Alfio Consoli,et al.  Reduction of common mode currents in PWM inverter motor drives , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[22]  Mohammad Rouhollah Yazdani,et al.  EMI Analysis and Evaluation of an Improved ZCT Flyback Converter , 2011, IEEE Transactions on Power Electronics.

[23]  Ali Elrayyah,et al.  An Effective Dithering Method for Electromagnetic Interference (EMI) Reduction in Single-Phase DC/AC Inverters , 2014, IEEE Transactions on Power Electronics.

[24]  J. W. Kolar,et al.  Closed-loop IGBT gate drive featuring highly dynamic di/dt and dv/dt control , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[25]  J. L. Norman Violette,et al.  An Introduction to Electromagnetic Compatibility , 1987 .

[26]  Jih-Sheng Lai,et al.  EMI experimental comparison of PWM inverters between hard- and soft-switching techniques , 1998, Power Electronics in Transportation (Cat. No.98TH8349).

[27]  D. Boroyevich,et al.  Comparative experimental evaluation of soft-switching inverter techniques for electric vehicle drive applications , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[28]  Gary L. Skibinski,et al.  Generation, control and regulation of EMI from AC drives , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[29]  Jih-Sheng Lai,et al.  An Improved Zero-Voltage Switching Inverter Using Two Coupled Magnetics in One Resonant Pole , 2010, IEEE Transactions on Power Electronics.

[30]  R. D. De Doncker,et al.  Analytical approximations of interference spectra generated by power converters , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[31]  J. Erdman,et al.  Effect of PWM inverters on AC motor bearing currents and shaft voltages , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[32]  D. Casadei,et al.  Experimental comparison of hard-switching, ZVT and SiC inverters , 2016, 2016 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM).

[33]  I. Barbi,et al.  A true PWM zero-voltage switching pole, with very low additional RMS current stress , 1991, PESC '91 Record 22nd Annual IEEE Power Electronics Specialists Conference.

[34]  Volker Pickert,et al.  Three-phase soft-switching voltage source converters for motor drives. Part 2 : Fundamental limitations and critical assessment , 1999 .

[35]  D. Holliday,et al.  Analysis of Shaped Pulse Transitions in Power Electronic Switching Waveforms for Reduced EMI Generation , 2011, IEEE Transactions on Industry Applications.

[36]  R.W. De Doncker,et al.  The auxiliary resonant commutated pole converter , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[37]  Jih-Sheng Lai,et al.  Source and Load Adaptive Design for a High-Power Soft-Switching Inverter , 2006, IEEE Transactions on Power Electronics.

[38]  Ivo Barbi,et al.  Analysis, designing, and experimentation of a transformer-assisted PWM zero-voltage switching pole inverter , 2000 .

[39]  Rik W. De Doncker,et al.  Ensuring soft-switching operation of a three-phase dual-active bridge DC-DC converter applying an auxiliary resonant-commutated pole , 2014, 2014 16th European Conference on Power Electronics and Applications.

[40]  Xibo Yuan,et al.  EMI reduction with a soft-switched auxiliary commutated pole inverter , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[41]  A. Di Napoli,et al.  EMC and safety in vehicle drives , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[42]  R. Teichmann.  Control parameter selection in auxiliary resonant commutated pole converters , 2001, IECON'01. 27th Annual Conference of the IEEE Industrial Electronics Society (Cat. No.37243).

[43]  Xibo Yuan,et al.  Controlling the output voltage frequency response of the auxiliary commutated pole inverter , 2016, IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society.

[44]  Andrew J. Forsyth,et al.  Evaluation of SiC BJTs for High-Power DC–DC Converters , 2014, IEEE Transactions on Power Electronics.

[45]  Deepak Divan,et al.  Zero-switching-loss inverters for high-power applications , 1989 .

[46]  Laszlo Tihanyi.  Electromagnetic Compatibility in Power Electronics , 1995 .

[47]  A. von Jouanne,et al.  The effect of long motor leads on PWM inverter fed AC motor drive systems , 1995, Proceedings of 1995 IEEE Applied Power Electronics Conference and Exposition - APEC'95.

[48]  R. Teichmann,et al.  Analysis of transfer ratio limitations in auxiliary resonant commutated pole converters , 2000, 7th IEEE International Power Electronics Congress. Technical Proceedings. CIEP 2000 (Cat. No.00TH8529).

[49]  Ray-Lee Lin,et al.  Characterization of EMI performance for hard and soft-switched inverters , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).