Biomechanical Analysis of the Human Finger Extensor Mechanism during Isometric Pressing

This study investigated the effects of the finger extensor mechanism on the bone-to-bone contact forces at the interphalangeal and metacarpal joints and also on the forces in the intrinsic and extrinsic muscles during finger pressing. This was done with finger postures ranging from very flexed to fully extended. The role of the finger extensor mechanism was investigated by using two alternative finger models, one which omitted the extensor mechanism and another which included it. A six-camera three-dimensional motion analysis system was used to capture the finger posture during maximum voluntary isometric pressing. The fingertip loads were recorded simultaneously using a force plate system. Two three-dimensional biomechanical finger models, a minimal model without extensor mechanism and a full model with extensor mechanism (tendon network), were used to calculate the joint bone-to-bone contact forces and the extrinsic and intrinsic muscle forces. If the full model is assumed to be realistic, then the results suggest some useful biomechanical advantages provided by the tendon network of the extensor mechanism. It was found that the forces in the intrinsic muscles (interosseus group and lumbrical) are significantly reduced by 22% to 61% due to the action of the extensor mechanism, with the greatest reductions in more flexed postures. The bone-to-bone contact force at the MCP joint is reduced by 10% to 41%. This suggests that the extensor mechanism may help to reduce the risk of injury at the finger joints and also to moderate the forces in intrinsic muscles. These apparent biomechanical advantages may be a result of the extensor mechanism's distinctive interconnected fibrous structure, through which the contraction of the intrinsic muscles as flexors of the MCP joint can generate extensions at the DIP and PIP joints.

[1]  C. Harris,et al.  The functional anatomy of the extensor mechanism of the finger. , 1972, The Journal of bone and joint surgery. American volume.

[2]  V M Zatsiorsky,et al.  The effect of finger extensor mechanism on the flexor force during isometric tasks. , 2001, Journal of biomechanics.

[3]  Edmund Y. S. Chao,et al.  GRAPHICAL INTERPRETATION OF THE SOLUTION TO THE REDUNDANT PROBLEM IN BIOMECHANICS. , 1978 .

[4]  J. P. Paul,et al.  A biomechanical analysis of the metacarpo-phalangeal joint , 1977 .

[5]  J Mizrahi,et al.  A biomechanical model of index finger dynamics. , 1995, Medical engineering & physics.

[6]  Chandana Paul,et al.  The Tendon Network of the Fingers Performs Anatomical Computation at a Macroscopic Scale , 2007, IEEE Transactions on Biomedical Engineering.

[7]  E Y Chao,et al.  Three-dimensional force analysis of finger joints in selected isometric hand functions. , 1976, Journal of biomechanics.

[8]  R. Crowninshield,et al.  A physiologically based criterion of muscle force prediction in locomotion. , 1981, Journal of biomechanics.

[9]  Franck Quaine,et al.  Using EMG data to constrain optimization procedure improves finger tendon tension estimations during static fingertip force production. , 2007, Journal of biomechanics.

[10]  J. Landsmeer.  The Coordination of Finger-Joint Motions , 1963 .

[11]  E. M. Smith,et al.  ROLE OF THE FINGER FLEXORS IN RHEUMATOID DEFORMITIES OF THE METACARPOPHALANGEAL JOINTS. , 1964, Arthritis and rheumatism.

[12]  H. Nötzli,et al.  Deformation of articular cartilage collagen structure under static and cyclic loading , 1998, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[13]  B M Hillberry,et al.  Finger joint force minimization in pianists using optimization techniques. , 1993, Journal of biomechanics.

[14]  N K Fowler,et al.  Interphalangeal joint and tendon forces: normal model and biomechanical consequences of surgical reconstruction. , 2000, Journal of biomechanics.

[15]  A A Amis,et al.  Finger joint force predictions related to design of joint replacements. , 1982, Journal of biomedical engineering.

[16]  Siaw Meng Chou,et al.  Development of a finger biomechanical model and its considerations. , 2010, Journal of biomechanics.

[17]  H J Helminen,et al.  Normal and pathological adaptations of articular cartilage to joint loading , 2000, Scandinavian journal of medicine & science in sports.

[18]  D. Thompson,et al.  A clinical study of forces generated by the intrinsic muscles of the index finger and the extrinsic flexor and extensor muscles of the hand. , 1978, The Journal of hand surgery.

[19]  J. P. Paul,et al.  A biomechanical analysis of the metacarpophalangeal joint. , 1977, Journal of biomechanics.

[20]  Ayman Habib,et al.  OpenSim: Open-Source Software to Create and Analyze Dynamic Simulations of Movement , 2007, IEEE Transactions on Biomedical Engineering.

[21]  R. Smith,et al.  Balance and kinetics of the fingers under normal and pathological conditions. , 1974, Clinical orthopaedics and related research.

[22]  F. Zajac,et al.  Large index-fingertip forces are produced by subject-independent patterns of muscle excitation. , 1998, Journal of biomechanics.

[23]  C. Long.  Intrinsic-extrinsic muscle control of the fingers. Electromyographic studies. , 1968, The Journal of bone and joint surgery. American volume.

[24]  C. Harris,et al.  The Functional Anatomy of the Extensor Mechanism of the Finger , 1972 .

[25]  J L Sancho-Bru,et al.  A 3-D dynamic model of human finger for studying free movements. , 2001, Journal of biomechanics.

[26]  K. Kursa,et al.  In vivo forces generated by finger flexor muscles do not depend on the rate of fingertip loading during an isometric task. , 2005, Journal of biomechanics.

[27]  K. An,et al.  Extensor mechanism of the fingers. I. A quantitative geometric study. , 1991, The Journal of hand surgery.

[28]  R. L. Linscheid,et al.  Forces in the normal and abnormal hand , 1985, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[29]  Sang Wook Lee,et al.  Effect of finger posture on the tendon force distribution within the finger extensor mechanism. , 2008, Journal of biomechanical engineering.

[30]  D. Eyler,et al.  The anatomy and function of the intrinsic musculature of the fingers. , 1954, The Journal of bone and joint surgery. American volume.

[31]  V M Zatsiorsky,et al.  Contribution of the extrinsic and intrinsic hand muscles to the moments in finger joints. , 2000, Clinical biomechanics.

[32]  Franck Quaine,et al.  Estimation of finger muscle tendon tensions and pulley forces during specific sport-climbing grip techniques. , 2006, Journal of biomechanics.

[33]  Landsmeer Jm.  Studies in the anatomy of articulation. I. The equilibrium of the "intercalated" bone. , 1961 .

[34]  J T Dennerlein,et al.  Tensions of the flexor digitorum superficialis are higher than a current model predicts. , 1998, Journal of biomechanics.

[35]  K. An,et al.  Extensor mechanism of the fingers. II. Tensile properties of components. , 1991, The Journal of hand surgery.

[36]  K N An,et al.  Normative model of human hand for biomechanical analysis. , 1979, Journal of biomechanics.

[37]  F.J. Valero-Cuevas,et al.  A computational environment to simulate complex tendinous topologies , 2004, The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[38]  J. Landsmeer.  Anatomical and functional investigations on the articulation of the human fingers. , 1955, Acta anatomica. Supplementum.

[39]  J. Landsmeer,et al.  THE COORDINATION OF FINGER-JOINT MOTIONS. , 1964, The Journal of bone and joint surgery. American volume.

[40]  E. Chao,et al.  Biomechanical analysis of static forces in the thumb during hand function. , 1977, The Journal of bone and joint surgery. American volume.

[41]  Eaton Rg.  The extensor mechanism of the fingers. , 1969 .

[42]  K. J. Cole,et al.  Coordination of index finger movements. , 1994, Journal of biomechanics.

[43]  C. Long.  Intrinsic-extrinsic muscle control of the fingers , 1969 .