Heat Transfer and Wall Heat Flux Partitioning During Subcooled Flow Nucleate Boiling—A Review
暂无分享,去创建一个
[1] Allan P. Colburn,et al. A method of correlating forced convection heat-transfer data and a comparison with fluid friction☆☆☆ , 1964 .
[2] I. Kljenak,et al. Modelling of local two-phase flow parameters in upward subcooled flow boiling at low pressure , 2004 .
[3] Nilanjana G. Basu. Modeling and experiments for wall heat flux partitioning during subcooled flow boiling of water at low pressures , 2003 .
[4] D. Kenning,et al. Subcooled flow boiling at high heat flux , 1985 .
[5] S. Rouhani,et al. CALCULATION OF VOID VOLUME FRACTION IN THE SUBCOOLED AND QUALITY BOILING REGIONS , 1970 .
[6] S. Y. Ahmad. Axial Distribution of Bulk Temperature and Void Fraction in a Heated Channel With Inlet Subcooling , 1970 .
[7] R. Boyd,et al. Boiling curve correlation for subcooled flow boiling , 1995 .
[8] J. Tu,et al. On numerical modelling of low-pressure subcooled boiling flows , 2002 .
[9] V. Dhir,et al. Wall Heat Flux Partitioning During Subcooled Flow Boiling at Low Pressures , 2003 .
[10] Michael Z. Podowski,et al. MULTIDIMENSIONAL EFFECTS IN FORCED CONVECTION SUBCOOLED BOILING , 1990 .
[11] W. T. Hancox,et al. A general technique for the prediction of void distributions in non-steady two-phase forced convection , 1971 .
[12] Charles C. Maneri,et al. Modeling and Numerical Prediction of Flow Boiling in a Thin Geometry , 2004 .
[13] A. M. Judd,et al. SHAPE AND DEPARTURE OF SINGLE BUBBLES GROWING AT A WALL , 1978 .
[14] S. Rouhani. Calculation of Steam Volume Fraction in Subcooled Boiling , 1968 .
[15] O. Zeitoun,et al. Subcooled Flow Boiling and Condensation , 1994 .
[16] W. H. McAdams,et al. Heat Transfer at High Rates to Water with Surface Boiling , 1949 .
[17] Satish G. Kandlikar,et al. Heat Transfer Characteristics in Partial Boiling, Fully Developed Boiling, and Significant Void Flow Regions of Subcooled Flow Boiling , 1997, Fluids Engineering.
[18] A. Ponter,et al. Nucleate boiling in binary mixtures , 1978 .
[19] R. Greif,et al. Heat Transfer to a Boiling Liquid—Mechanism and Correlations , 1959 .
[20] N. Zuber,et al. POINT OF NET VAPOR GENERATION AND VAPOR VOID FRACTION IN SUBCOOLED BOILING , 1974 .
[21] N. Zuber,et al. Average volumetric concentration in two-phase flow systems , 1965 .
[22] W. Rohsenow,et al. The Determination of Forced-Convection Surface-Boiling Heat Transfer , 1964 .
[23] W. H. Jens,et al. ANALYSIS OF HEAT TRANSFER, BURNOUT, PRESSURE DROP AND DENSITY DATE FOR HIGH- PRESSURE WATER , 1951 .
[24] G. R. Hall,et al. Correlation of forced convection boiling heat transfer data , 1982 .
[25] H. C. Ünal,et al. Maximum bubble diameter, maximum bubble-growth time and bubble-growth rate during the subcooled nucleate flow boiling of water up to 17.7 MN/m2 , 1976 .
[26] R. Hendricks,et al. Assessment of convection, conduction, and evaporation in nucleate boiling , 1967 .
[27] M. B. Carver,et al. Application of generation and condensation models to predict subcooled boiling void at low pressures , 1992 .
[28] Vijay K. Dhir,et al. Wall Heat Flux Partitioning During Subcooled Flow Boiling: Part II—Model Validation , 2005 .
[29] J. R. T. Lahey. A MECHANISTIC SUBCOOLED BOILING MODEL , 1978 .
[30] J. C. Chen. Correlation for Boiling Heat Transfer to Saturated Fluids in Convective Flow , 1966 .
[31] S. S. Kutateladze. BOILING HEAT TRANSFER , 1961 .
[32] Vijay K. Dhir,et al. Wall Heat Flux Partitioning During Subcooled Flow Boiling: Part 1—Model Development , 2005 .
[33] B. Mikic,et al. A New Correlation of Pool-Boiling Data Including the Effect of Heating Surface Characteristics , 1969 .
[34] R. Winterton,et al. A general correlation for saturated and subcooled flow boiling in tubes and annuli, based on a nucleate pool boiling equation , 1991 .
[35] D.B.R. Kenning,et al. Fully-developed nucleate boiling: Overlap of areas of influence and interference between bubble sites , 1981 .
[36] Robert Cole,et al. A photographic study of pool boiling in the region of the critical heat flux , 1960 .