Resistive switching memories based on metal oxides: mechanisms, reliability and scaling

With the explosive growth of digital data in the era of the Internet of Things (IoT), fast and scalable memory technologies are being researched for data storage and data-driven computation. Among the emerging memories, resistive switching memory (RRAM) raises strong interest due to its high speed, high density as a result of its simple two-terminal structure, and low cost of fabrication. The scaling projection of RRAM, however, requires a detailed understanding of switching mechanisms and there are potential reliability concerns regarding small device sizes. This work provides an overview of the current understanding of bipolar-switching RRAM operation, reliability and scaling. After reviewing the phenomenological and microscopic descriptions of the switching processes, the stability of the low- and high-resistance states will be discussed in terms of conductance fluctuations and evolution in 1D filaments containing only a few atoms. The scaling potential of RRAM will finally be addressed by reviewing the recent breakthroughs in multilevel operation and 3D architecture, making RRAM a strong competitor among future high-density memory solutions.

[1]  Byung Joon Choi,et al.  Resistive switching mechanism of TiO2 thin films grown by atomic-layer deposition , 2005 .

[2]  Daniele Ielmini,et al.  Resistive‐Switching Memory , 2014 .

[3]  C. Cagli,et al.  Cycle-to-Cycle Intrinsic RESET Statistics in ${\rm HfO}_{2}$-Based Unipolar RRAM Devices , 2013, IEEE Electron Device Letters.

[4]  C. Hwang,et al.  The conical shape filament growth model in unipolar resistance switching of TiO2 thin film , 2009 .

[5]  Kinam Kim,et al.  A fast, high-endurance and scalable non-volatile memory device made from asymmetric Ta2O(5-x)/TaO(2-x) bilayer structures. , 2011, Nature materials.

[6]  Frederick T. Chen,et al.  Low power and high speed bipolar switching with a thin reactive Ti buffer layer in robust HfO2 based RRAM , 2008, 2008 IEEE International Electron Devices Meeting.

[7]  K. Tsunoda,et al.  Reduction in the reset current in a resistive random access memory consisting of NiOx brought about by reducing a parasitic capacitance , 2008 .

[8]  Makoto Kitagawa,et al.  A 4Mb conductive-bridge resistive memory with 2.3GB/s read-throughput and 216MB/s program-throughput , 2011, 2011 IEEE International Solid-State Circuits Conference.

[9]  M. Kozicki,et al.  Low current resistive switching in Cu–SiO2 cells , 2008 .

[10]  R. Symanczyk,et al.  Conductive bridging RAM (CBRAM): an emerging non-volatile memory technology scalable to sub 20nm , 2005, IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest..

[11]  J. Yang,et al.  High switching endurance in TaOx memristive devices , 2010 .

[12]  N. Righos,et al.  A stackable cross point Phase Change Memory , 2009, 2009 IEEE International Electron Devices Meeting (IEDM).

[13]  P. Narayanan,et al.  Access devices for 3D crosspoint memorya) , 2014 .

[14]  R. Howard,et al.  Discrete Resistance Switching in Submicrometer Silicon Inversion Layers: Individual Interface Traps and Low-Frequency ( 1 f ?) Noise , 1984 .

[15]  L. Goux,et al.  Intrinsic Tailing of Resistive States Distributions in Amorphous HfOx and TaOx Based Resistive Random Access Memories , 2015, IEEE Electron Device Letters.

[16]  Daniele Ielmini,et al.  Control of filament size and reduction of reset current below 10 μA in NiO resistance switching memories , 2011 .

[17]  龙世兵.  Cycle-to-Cycle Intrinsic RESET Statistics in HfO2-Based Unipolar RRAM Devices , 2013 .

[18]  D. Ielmini,et al.  Complementary switching in metal oxides: Toward diode-less crossbar RRAMs , 2011, 2011 International Electron Devices Meeting.

[19]  Chang Hua Siau,et al.  A 0.13µm 64Mb multi-layered conductive metal-oxide memory , 2010, 2010 IEEE International Solid-State Circuits Conference - (ISSCC).

[20]  Shimeng Yu,et al.  HfOx-based vertical resistive switching random access memory suitable for bit-cost-effective three-dimensional cross-point architecture. , 2013, ACS nano.

[21]  D. Ielmini,et al.  Universal Reset Characteristics of Unipolar and Bipolar Metal-Oxide RRAM , 2011, IEEE Transactions on Electron Devices.

[22]  Alessandro Calderoni,et al.  Engineering ReRAM for high-density applications , 2015 .

[23]  Stefano Ambrogio,et al.  Normally-off Logic Based on Resistive Switches—Part II: Logic Circuits , 2015, IEEE Transactions on Electron Devices.

[24]  D. Ielmini,et al.  Study of Multilevel Programming in Programmable Metallization Cell (PMC) Memory , 2009, IEEE Transactions on Electron Devices.

[25]  S. Ambrogio,et al.  Statistical Fluctuations in HfOx Resistive-Switching Memory: Part II—Random Telegraph Noise , 2014, IEEE Transactions on Electron Devices.

[26]  Qi Liu,et al.  Real‐Time Observation on Dynamic Growth/Dissolution of Conductive Filaments in Oxide‐Electrolyte‐Based ReRAM , 2012, Advanced materials.

[27]  V. Kharton,et al.  Transport properties of solid oxide electrolyte ceramics: a brief review , 2004 .

[28]  Shimeng Yu,et al.  Compact Modeling of Conducting-Bridge Random-Access Memory (CBRAM) , 2011, IEEE Transactions on Electron Devices.

[29]  D. Ielmini,et al.  Self-Accelerated Thermal Dissolution Model for Reset Programming in Unipolar Resistive-Switching Memory (RRAM) Devices , 2009, IEEE Transactions on Electron Devices.

[30]  Chung-Wei Hsu,et al.  3D vertical TaOx/TiO2 RRAM with over 103 self-rectifying ratio and sub-μA operating current , 2013, 2013 IEEE International Electron Devices Meeting.

[31]  Giacomo Indiveri,et al.  Integration of nanoscale memristor synapses in neuromorphic computing architectures , 2013, Nanotechnology.

[32]  Winfried W. Wilcke,et al.  Storage-class memory: The next storage system technology , 2008, IBM J. Res. Dev..

[33]  K. Aratani,et al.  A Novel Resistance Memory with High Scalability and Nanosecond Switching , 2007, 2007 IEEE International Electron Devices Meeting.

[34]  M. Choe,et al.  Quantized conductive filament formed by limited Cu source in sub-5nm era , 2011, 2011 International Electron Devices Meeting.

[35]  Sasago Yoshitaka,et al.  Cross-Point phase change memory with 4F2 cell size driven by low-contact resistivity poly-si diode , 2009 .

[36]  D. Ielmini,et al.  Complementary Switching in Oxide-Based Bipolar Resistive-Switching Random Memory , 2013, IEEE Transactions on Electron Devices.

[37]  Radenka Maric,et al.  A brief review of the ionic conductivity enhancement for selected oxide electrolytes , 2007 .

[38]  황현상.  Nanoscale (~10nm) 3D Vertical ReRAM and NbO2 Threshold Selector with TiN Electrode , 2013 .

[39]  Shimeng Yu,et al.  Investigating the switching dynamics and multilevel capability of bipolar metal oxide resistive switching memory , 2011 .

[40]  R G Elliman,et al.  Oxygen self-diffusion in HfO2 studied by electron spectroscopy. , 2014, Physical review letters.

[41]  D. Querlioz,et al.  Visual Pattern Extraction Using Energy-Efficient “2-PCM Synapse” Neuromorphic Architecture , 2012, IEEE Transactions on Electron Devices.

[42]  H. Ahn,et al.  Realization of vertical resistive memory (VRRAM) using cost effective 3D process , 2011, 2011 International Electron Devices Meeting.

[43]  S. Ambrogio,et al.  Analytical Modeling of Oxide-Based Bipolar Resistive Memories and Complementary Resistive Switches , 2014, IEEE Transactions on Electron Devices.

[44]  D Ielmini,et al.  Multiple Memory States in Resistive Switching Devices Through Controlled Size and Orientation of the Conductive Filament , 2013, Advanced materials.

[45]  M. R. Uddin,et al.  A plasma-treated chalcogenide switch device for stackable scalable 3D nanoscale memory , 2013, Nature Communications.

[46]  D. Ielmini,et al.  Modeling of Programming and Read Performance in Phase-Change Memories—Part I: Cell Optimization and Scaling , 2008, IEEE Transactions on Electron Devices.

[47]  C. Y. Chen,et al.  Understanding the impact of programming pulses and electrode materials on the endurance properties of scaled Ta2O5 RRAM cells , 2014, 2014 IEEE International Electron Devices Meeting.

[48]  M. Wuttig,et al.  Phase-change materials for rewriteable data storage. , 2007, Nature materials.

[49]  D. Ielmini,et al.  Impact of low-frequency noise on read distributions of resistive switching memory (RRAM) , 2014, 2014 IEEE International Electron Devices Meeting.

[50]  K. Virwani,et al.  Sub-30nm scaling and high-speed operation of fully-confined Access-Devices for 3D crosspoint memory based on mixed-ionic-electronic-conduction (MIEC) materials , 2012, 2012 International Electron Devices Meeting.

[51]  Stefano Ambrogio,et al.  Noise-Induced Resistance Broadening in Resistive Switching Memory—Part I: Intrinsic Cell Behavior , 2015, IEEE Transactions on Electron Devices.

[52]  L. Goux,et al.  Intrinsic switching variability in HfO2 RRAM , 2013, 2013 5th IEEE International Memory Workshop.

[53]  I. Yoo,et al.  2-stack 1D-1R Cross-point Structure with Oxide Diodes as Switch Elements for High Density Resistance RAM Applications , 2007, 2007 IEEE International Electron Devices Meeting.

[54]  S. Balatti,et al.  Resistive Switching by Voltage-Driven Ion Migration in Bipolar RRAM—Part II: Modeling , 2012, IEEE Transactions on Electron Devices.

[55]  Rainer Waser,et al.  Probing Cu doped Ge0.3Se0.7 based resistance switching memory devices with random telegraph noise , 2010 .

[56]  H. Hwang,et al.  High current density and nonlinearity combination of selection device based on TaO(x)/TiO2/TaO(x) structure for one selector-one resistor arrays. , 2012, ACS nano.

[57]  S. Menzel,et al.  Simulation of multilevel switching in electrochemical metallization memory cells , 2012 .

[58]  Enrique Miranda,et al.  Modeling of the Hysteretic $I{-}V$ Characteristics of ${\rm TiO}_{2}$-Based Resistive Switches Using the Generalized Diode Equation , 2014, IEEE Electron Device Letters.

[59]  H. Hwang,et al.  Excellent Selector Characteristics of Nanoscale $ \hbox{VO}_{2}$ for High-Density Bipolar ReRAM Applications , 2011, IEEE Electron Device Letters.

[60]  D. Ielmini,et al.  Set Variability and Failure Induced by Complementary Switching in Bipolar RRAM , 2013, IEEE Electron Device Letters.

[61]  R. Waser,et al.  Nanoionics-based resistive switching memories. , 2007, Nature materials.

[62]  G. Lo,et al.  Analytic model of endurance degradation and its practical applications for operation scheme optimization in metal oxide based RRAM , 2013, 2013 IEEE International Electron Devices Meeting.

[63]  Gregory S. Snider,et al.  ‘Memristive’ switches enable ‘stateful’ logic operations via material implication , 2010, Nature.

[64]  Frederick T. Chen,et al.  Evidence and solution of over-RESET problem for HfOX based resistive memory with sub-ns switching speed and high endurance , 2010, 2010 International Electron Devices Meeting.

[65]  Alessandro Calderoni,et al.  Statistical Fluctuations in HfOx Resistive-Switching Memory: Part I - Set/Reset Variability , 2014, IEEE Transactions on Electron Devices.

[66]  Hyunsang Hwang,et al.  Co-Occurrence of Threshold Switching and Memory Switching in $\hbox{Pt}/\hbox{NbO}_{x}/\hbox{Pt}$ Cells for Crosspoint Memory Applications , 2012, IEEE Electron Device Letters.

[67]  R. Bez,et al.  Phase-change memory technology for embedded applications , 2004, Proceedings of the 30th European Solid-State Circuits Conference (IEEE Cat. No.04EX850).

[68]  I. Baek,et al.  Multi-layer cross-point binary oxide resistive memory (OxRRAM) for post-NAND storage application , 2005, IEEE InternationalElectron Devices Meeting, 2005. IEDM Technical Digest..

[69]  Jordi Suñé,et al.  Voltage and Power-Controlled Regimes in the Progressive Unipolar RESET Transition of HfO2-Based RRAM , 2013, Scientific Reports.

[70]  Malgorzata Jurczak,et al.  A Thermally Stable and High-Performance 90-nm ${\rm Al}_{2}{\rm O}_{3}\backslash{\rm Cu}$-Based 1T1R CBRAM Cell , 2013, IEEE Transactions on Electron Devices.

[71]  D. Ielmini,et al.  Modeling the Universal Set/Reset Characteristics of Bipolar RRAM by Field- and Temperature-Driven Filament Growth , 2011, IEEE Transactions on Electron Devices.

[72]  O. Pirrotta,et al.  Microscopic Modeling of HfOx RRAM Operations: From Forming to Switching , 2015, IEEE Transactions on Electron Devices.

[73]  A. Fert,et al.  The emergence of spin electronics in data storage. , 2007, Nature materials.

[74]  D. Ielmini,et al.  Size-Dependent Retention Time in NiO-Based Resistive-Switching Memories , 2010, IEEE Electron Device Letters.

[75]  L. Goux,et al.  Dynamic ‘hour glass’ model for SET and RESET in HfO2 RRAM , 2012, 2012 Symposium on VLSI Technology (VLSIT).

[76]  Stefano Ambrogio,et al.  Statistical modeling of program and read variability in resistive switching devices , 2014, 2014 IEEE International Symposium on Circuits and Systems (ISCAS).

[77]  L. Goux,et al.  Balancing SET/RESET Pulse for $>\hbox{10}^{10}$ Endurance in $\hbox{HfO}_{2}\hbox{/Hf}$ 1T1R Bipolar RRAM , 2012, IEEE Transactions on Electron Devices.

[78]  Buhrman,et al.  Microscopic study of 1/f noise in metal nanobridges. , 1991, Physical review. B, Condensed matter.

[79]  Hyunsang Hwang,et al.  Diode-less nano-scale ZrOx/HfOx RRAM device with excellent switching uniformity and reliability for high-density cross-point memory applications , 2010, 2010 International Electron Devices Meeting.

[80]  Andrew D Kent,et al.  A new spin on magnetic memories. , 2015, Nature nanotechnology.

[81]  O. Richard,et al.  10×10nm2 Hf/HfOx crossbar resistive RAM with excellent performance, reliability and low-energy operation , 2011, 2011 International Electron Devices Meeting.

[82]  D. Ielmini,et al.  Trade-off between data retention and reset in NiO RRAMS , 2010, 2010 IEEE International Reliability Physics Symposium.

[83]  R. Waser,et al.  Thermochemical resistive switching: materials, mechanisms, and scaling projections , 2011 .

[84]  G. Ghibaudo,et al.  Current Conduction Model for Oxide-Based Resistive Random Access Memory Verified by Low-Frequency Noise Analysis , 2013, IEEE Transactions on Electron Devices.

[85]  D. Ielmini,et al.  Pulsed cycling operation and endurance failure of metal-oxide resistive (RRAM) , 2014, 2014 IEEE International Electron Devices Meeting.

[86]  C. Cagli,et al.  Quantum-size effects in hafnium-oxide resistive switching , 2013 .

[87]  Mohsen Mhadhbi,et al.  Phase Change Materials and Their Applications , 2018 .

[88]  G. Bersuker,et al.  Statistical assessment of endurance degradation in high and low resistive states of the HfO2-based RRAM , 2013, 2013 IEEE International Reliability Physics Symposium (IRPS).

[89]  Stefano Ambrogio,et al.  Noise-Induced Resistance Broadening in Resistive Switching Memory—Part II: Array Statistics , 2015, IEEE Transactions on Electron Devices.

[90]  H-S Philip Wong,et al.  Memory leads the way to better computing. , 2015, Nature nanotechnology.

[91]  Shimeng Yu,et al.  On the Switching Parameter Variation of Metal Oxide RRAM—Part II: Model Corroboration and Device Design Strategy , 2012, IEEE Transactions on Electron Devices.

[92]  D. Ielmini,et al.  Phase change materials and their application to nonvolatile memories. , 2010, Chemical reviews.

[93]  C. Chung,et al.  A non-linear ReRAM cell with sub-1μA ultralow operating current for high density vertical resistive memory (VRRAM) , 2012, 2012 International Electron Devices Meeting.

[94]  Jacopo Frascaroli,et al.  Role of metal-oxide interfaces in the multiple resistance switching regimes of Pt/HfO2/TiN devices , 2015 .

[95]  A. Sawa.  Resistive switching in transition metal oxides , 2008 .

[96]  H. Hwang,et al.  Accelerated Retention Test Method by Controlling Ion Migration Barrier of Resistive Random Access Memory , 2015, IEEE Electron Device Letters.

[97]  S. Balatti,et al.  Evidence for Voltage-Driven Set/Reset Processes in Bipolar Switching RRAM , 2012, IEEE Transactions on Electron Devices.

[98]  S. O. Park,et al.  Highly scalable nonvolatile resistive memory using simple binary oxide driven by asymmetric unipolar voltage pulses , 2004, IEDM Technical Digest. IEEE International Electron Devices Meeting, 2004..

[99]  Wei D. Lu,et al.  Electrochemical dynamics of nanoscale metallic inclusions in dielectrics , 2014, Nature Communications.

[100]  Yuchao Yang,et al.  Observation of conducting filament growth in nanoscale resistive memories , 2012, Nature Communications.

[101]  Jin-Ki Kim,et al.  A 3.3 V 32 Mb NAND flash memory with incremental step pulse programming scheme , 1995, Proceedings ISSCC '95 - International Solid-State Circuits Conference.

[102]  Alessandro Calderoni,et al.  Voltage-Controlled Cycling Endurance of HfOx-Based Resistive-Switching Memory , 2015, IEEE Transactions on Electron Devices.

[103]  D. Ielmini,et al.  Resistance transition in metal oxides induced by electronic threshold switching , 2009 .

[104]  Shinhyun Choi,et al.  Comprehensive physical model of dynamic resistive switching in an oxide memristor. , 2014, ACS nano.

[105]  Daniele Ielmini,et al.  Scaling analysis of submicrometer nickel-oxide-based resistive switching memory devices , 2011 .

[106]  Heng-Yuan Lee,et al.  Data retention statistics and modelling in HfO2 resistive switching memories , 2015, 2015 IEEE International Reliability Physics Symposium.

[107]  Hyunsang Hwang,et al.  Investigation of State Stability of Low-Resistance State in Resistive Memory , 2010, IEEE Electron Device Letters.

[108]  Shimeng Yu,et al.  Characterization of low-frequency noise in the resistive switching of transition metal oxide HfO 2 , 2012 .

[109]  E. Vianello,et al.  On the Origin of Low-Resistance State Retention Failure in HfO2-Based RRAM and Impact of Doping/Alloying , 2015, IEEE Transactions on Electron Devices.

[110]  Chenming Hu,et al.  Threshold Vacuum Switch (TVS) on 3D-stackable and 4F2 cross-point bipolar and unipolar resistive random access memory , 2012, 2012 International Electron Devices Meeting.

[111]  Chang Jung Kim,et al.  Physical electro-thermal model of resistive switching in bi-layered resistance-change memory , 2013, Scientific Reports.

[112]  Simone Balatti,et al.  A 2-transistor/1-resistor artificial synapse capable of communication and stochastic learning in neuromorphic systems , 2015, Front. Neurosci..

[113]  D. Ielmini,et al.  Resistance-dependent amplitude of random telegraph-signal noise in resistive switching memories , 2010 .

[114]  W. Lu,et al.  High-density Crossbar Arrays Based on a Si Memristive System , 2008 .

[115]  Yukio Hayakawa,et al.  An 8 Mb Multi-Layered Cross-Point ReRAM Macro With 443 MB/s Write Throughput , 2012, IEEE Journal of Solid-State Circuits.

[116]  Byoungil Lee,et al.  Nanoelectronic programmable synapses based on phase change materials for brain-inspired computing. , 2012, Nano letters.

[117]  Yi Ma,et al.  Demonstration of Conductive Bridging Random Access Memory (CBRAM) in logic CMOS process , 2011 .

[118]  T. Yamamoto,et al.  Low-power embedded ReRAM technology for IoT applications , 2015, 2015 Symposium on VLSI Technology (VLSI Technology).

[119]  Jiyoung Kim,et al.  Random and localized resistive switching observation in Pt/NiO/Pt , 2007 .

[120]  D. Ielmini,et al.  Filament Conduction and Reset Mechanism in NiO-Based Resistive-Switching Memory (RRAM) Devices , 2009, IEEE Transactions on Electron Devices.

[121]  J Joshua Yang,et al.  Memristive devices for computing. , 2013, Nature nanotechnology.

[122]  Hyunsang Hwang,et al.  Resistive switching characteristics of ultra-thin TiOx , 2011 .

[123]  Neng Wan,et al.  Resistive Switching: Real‐Time Observation on Dynamic Growth/Dissolution of Conductive Filaments in Oxide‐Electrolyte‐Based ReRAM (Adv. Mater. 14/2012) , 2012 .

[124]  Doo Seok Jeong,et al.  A Review of Three‐Dimensional Resistive Switching Cross‐Bar Array Memories from the Integration and Materials Property Points of View , 2014 .

[125]  Bilge Yildiz,et al.  Predicting self-diffusion in metal oxides from first principles: The case of oxygen in tetragonal ZrO₂ , 2014 .

[126]  Yuchao Yang,et al.  Complementary resistive switching in tantalum oxide-based resistive memory devices , 2012, 1204.3515.

[127]  M. Tsai,et al.  Ultra high density 3D via RRAM in pure 28nm CMOS process , 2013, 2013 IEEE International Electron Devices Meeting.

[128]  L. Goux,et al.  Improvement of data retention in HfO2/Hf 1T1R RRAM cell under low operating current , 2013, 2013 IEEE International Electron Devices Meeting.

[129]  H-S Philip Wong,et al.  Multi-level control of conductive nano-filament evolution in HfO2 ReRAM by pulse-train operations. , 2014, Nanoscale.

[130]  Stefano Ambrogio,et al.  Impact of the Mechanical Stress on Switching Characteristics of Electrochemical Resistive Memory , 2014, Advanced materials.

[131]  Wei Yang Lu,et al.  Nanoscale memristor device as synapse in neuromorphic systems. , 2010, Nano letters.

[132]  B. Delley,et al.  Role of Oxygen Vacancies in Cr‐Doped SrTiO3 for Resistance‐Change Memory , 2007, 0707.0563.

[133]  B. Diény,et al.  Spin-transfer effect and its use in spintronic components , 2010 .

[134]  Shimeng Yu,et al.  Metal–Oxide RRAM , 2012, Proceedings of the IEEE.

[135]  Shimeng Yu,et al.  On the Switching Parameter Variation of Metal-Oxide RRAM—Part I: Physical Modeling and Simulation Methodology , 2012, IEEE Transactions on Electron Devices.

[136]  Heng-Yuan Lee,et al.  A 4Mb embedded SLC resistive-RAM macro with 7.2ns read-write random-access time and 160ns MLC-access capability , 2011, 2011 IEEE International Solid-State Circuits Conference.

[137]  Ryutaro Yasuhara,et al.  Filament scaling forming technique and level-verify-write scheme with endurance over 107 cycles in ReRAM , 2013, 2013 IEEE International Solid-State Circuits Conference Digest of Technical Papers.

[138]  Hyunsang Hwang,et al.  Demonstration of Low Power 3-bit Multilevel Cell Characteristics in a TaOx-Based RRAM by Stack Engineering , 2015, IEEE Electron Device Letters.

[139]  R. Cavin,et al.  Scaling limits of resistive memories , 2011, Nanotechnology.

[140]  Jian Wu,et al.  Technology and circuit optimization of resistive RAM for low-power, reproducible operation , 2014, 2014 IEEE International Electron Devices Meeting.

[141]  R. Williams,et al.  Sub-nanosecond switching of a tantalum oxide memristor , 2011, Nanotechnology.

[142]  S. Ambrogio,et al.  Normally-off Logic Based on Resistive Switches—Part I: Logic Gates , 2015, IEEE Transactions on Electron Devices.

[143]  S. Balatti,et al.  Resistive Switching by Voltage-Driven Ion Migration in Bipolar RRAM—Part I: Experimental Study , 2012, IEEE Transactions on Electron Devices.