Parallel system of bidirectional DC/DC converter for improvement of transient response in DC distribution system for building applications

In this paper, Parallel system of DC-DC Converter applied to DC distribution system for building Applications. Power supply device of DC distribution needs a large power system that is requires Efficiency and reliability of the power conversion systems. If A single converter supplies power to the all load connected to DC grid, Temperature rise, reduction in life of system and capacity expansion is limited. In power supply device which require high power system such as DC distribution for building applications, stability and response characteristic of DC gird voltage are critical in DC distribution system. For improving limited switching frequency in using the DC/DC converter, this paper present parallel operation method of bidirectional DC/DC converter. In this paper, ripple reduction and improved transient response was verified by simulation and experiment.

[1]  Deepak Divan,et al.  Control of distributed UPS systems , 1994, Proceedings of 1994 Power Electronics Specialist Conference - PESC'94.

[2]  M.R. Iravani,et al.  Power Management Strategies for a Microgrid With Multiple Distributed Generation Units , 2006, IEEE Transactions on Power Systems.

[3]  J. Miret,et al.  A wireless controller to enhance dynamic performance of parallel inverters in distributed generation systems , 2004, IEEE Transactions on Power Electronics.

[4]  Chung-Yuen Won,et al.  Soft start method of three-phase AC/DC converter using improved sliding mode controller in DC distribution system for building application , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[5]  Seung-Ki Sul,et al.  Fast current controller in three-phase AC/DC boost converter using d-q axis crosscoupling , 1996 .

[6]  T.C. Green,et al.  Modeling, Analysis and Testing of Autonomous Operation of an Inverter-Based Microgrid , 2007, IEEE Transactions on Power Electronics.

[7]  Frede Blaabjerg,et al.  Shunt Active-Power-Filter Topology Based on Parallel Interleaved Inverters , 2008, IEEE Transactions on Industrial Electronics.