Effect of purification treatment on adsorption characteristics of carbon nanotubes

Carbon nanotubes are novel materials with porous-rich structures and superior adsorption characteristics. In this report, multi-walled carbon nanotubes with different diameter were synthesized by thermal chemical vapor deposition. Amorphous carbon particles were highly removed by thermal oxidation process. Microwave digestion acidic procedure was used to dissolve metal catalysts and open tip of carbon nanotubes. The opened-end multi-walled carbon nanotubes are expected to be much more porous with more gas adsorption sites. The results indicated that the BET surface area decreases with their increasing of diameter of MWCNTs. The effective surface area of carbon nanotubes processed by thermal annealing treatment can increase with the increasing temperatures of 300 °C, 400 °C and 450 °C. Similarly, effective surface area of carbon nanotubes processed by microwave digestion acidic treatment can also increase with increasing processing time. Nitric acid can effectively absorb microwave energy and rapidly dissolve impurities in the carbon nanotubes during digestion process. The surface area increased about 30% with 20 min microwave digestion treatment time. However, microwave digestion acidic and thermal annealing treatments not only remove metallic catalysts and amorphous carbon particles and also increase effective surface area and the extent of purification of carbon nanotubes.

[1]  S. J. Gregg,et al.  Adsorption Surface Area and Porosity , 1967 .

[2]  Weber,et al.  Gases Do not adsorb on the interstitial channels of closed-ended single-walled carbon nanotube bundles , 2000, Physical review letters.

[3]  Z. Pan,et al.  Nitrogen adsorption characterization of aligned multiwalled carbon nanotubes and their acid modification. , 2004, Journal of colloid and interface science.

[4]  J. Nagy,et al.  Different purification methods of carbon nanotubes produced by catalytic synthesis , 1999 .

[5]  Kuo Chu Hwang,et al.  Efficient cleavage of carbon graphene layers by oxidants , 1995 .

[6]  Mi Chen,et al.  Microwave digestion and acidic treatment procedures for the purification of multi-walled carbon nanotubes , 2005 .

[7]  M. Jaroniec,et al.  Physicochemical Foundations for Characterization of Adsorbents by Using High-Resolution Comparative Plots , 1997 .

[8]  Richard E. Smalley,et al.  Surface defect site density on single walled carbon nanotubes by titration , 2000 .

[9]  Bin Chen,et al.  Pore structure of raw and purified HiPco single-walled carbon nanotubes , 2002 .

[10]  A. Rousset,et al.  Specific surface area of carbon nanotubes and bundles of carbon nanotubes , 2001 .

[11]  Mi Chen,et al.  Purification of multi-walled carbon nanotubes by microwave digestion method , 2004 .

[12]  B. Mcenaney,et al.  Adsorption of Nitrogen in Carbon Nanotube Arrays , 1999 .

[13]  M. Jaroniec,et al.  Adsorption Characterization of Octyl Bonded Phases for High Performance Liquid Chromatography , 1996 .

[14]  Malcolm L. H. Green,et al.  Thinning and opening of carbon nanotubes by oxidation using carbon dioxide , 1993, Nature.

[15]  Cheng,et al.  Hydrogen storage in single-walled carbon nanotubes at room temperature , 1999, Science.

[16]  T. Ebbesen,et al.  Capillarity and Wetting of Carbon Nanotubes , 1994, Science.

[17]  P. Bouř,et al.  Measurement and Calculation of Absolute Rotational Strengths for Camphor, r-Pinene, and Borneol , 1998 .

[18]  Geraldine Jacobsen,et al.  The World's Smallest Gas Cylinders? , 1997 .

[19]  Ya‐Ping Sun,et al.  Space durable polymer/carbon nanotube films for electrostatic charge mitigation ☆ , 2004 .

[20]  Quan-hong Yang,et al.  Adsorption and capillarity of nitrogen in aggregated multi-walled carbon nanotubes , 2001 .

[21]  D. Ugarte,et al.  Nanocapillarity and Chemistry in Carbon Nanotubes , 1996, Science.

[22]  Y. Hao,et al.  Defect Location of Individual Single-Walled Carbon Nanotubes with a Thermal Oxidation Strategy , 2002 .

[23]  Quan Qing,et al.  Effect of Chemical Oxidation on the Structure of Single-Walled Carbon Nanotubes , 2003 .

[24]  K. Sing.  Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984) , 1985 .

[25]  Y. Sakurai,et al.  Dependence of hydrogen storage characteristics of mechanically milled carbon materials on their host structures , 2004 .

[26]  K. L. Tan,et al.  Nanosized Nickel(or Cobalt)/Graphite Composites for Hydrogen Storage , 2002 .

[27]  T. Fukunaga,et al.  Hydrogen desorption property of mechanically prepared nanostructured graphite , 2001 .

[28]  Quan-hong Yang,et al.  Hydrogen adsorption/desorption behavior of multi-walled carbon nanotubes with different diameters , 2003 .

[29]  Cheol-Min Yang,et al.  Effect of Purification on Pore Structure of HiPco Single-Walled Carbon Nanotube Aggregates , 2002 .

[30]  D. Bethune,et al.  Storage of hydrogen in single-walled carbon nanotubes , 1997, Nature.

[31]  Y. Saito,et al.  Field emission from carbon nanotubes; purified single-walled and multi-walled tubes , 1998 .