Comparative investigations of radiation‐grafted proton‐exchange membranes prepared using single‐step and conventional two‐step radiation‐induced grafting methods

Proton-exchange membranes containing poly(styrene sulfonic acid) grafts hosted in poly(vinylidene fluoride) (PVDF) films were prepared using two radiation-induced grafting methods: a single-step grafting method (SSGM) involving grafting of sodium styrene sulfonate onto electron beam (EB)-irradiated PVDF films and a conventional two-step grafting method (CTSGM) in which styrene monomer is grafted onto EB-irradiated PVDF films and subsequently sulfonated. Differential scanning calorimetry, universal mechanical testing and scanning transmission electron microscopy were used to evaluate the thermal, mechanical and structural changes developed in the membranes during the preparation procedures. Physicochemical properties such as water uptake, hydration number and ionic conductivity were studied as functions of ion-exchange capacity and the results obtained were correlated with the structural changes accompanying each preparation method. Membranes obtained using the SSGM were found to have superior properties compared to their counterparts prepared using the CTSGM suggesting the former method is more effective than the latter for imparting desired functionality and stability properties to the membranes. Membranes prepared using a single-step grafting method (SSGM) have smaller ionic clusters and lower water absorbance than those prepared using a conventional two-step grafting method (CSTGM) despite the higher ion exchange capacity.

[1]  M. Nasef,et al.  Single Radiation‐Induced Grafting Method for the Preparation of Two Proton‐ and Lithium Ion‐Conducting Membranes , 2006 .

[2]  Minghong G. Wu,et al.  Cation-exchange membranes by radiation-induced graft copolymerization of monomers onto HDPE , 2005 .

[3]  V. Antonucci,et al.  Investigation of grafted ETFE-based polymer membranes as alternative electrolyte for direct methanol fuel cells , 2003 .

[4]  S. A. Gürsel,et al.  Radiation Grafted Membranes for Polymer Electrolyte Fuel Cells , 2005 .

[5]  M. Nasef,et al.  Single-step radiation induced grafting for preparation of proton exchange membranes for fuel cell , 2009 .

[6]  Maolin Zhai,et al.  Hydrocarbon proton-conductive membranes prepared by radiation-grafting of styrenesulfonate onto aromatic polyamide films , 2009 .

[7]  Dukjoon Kim,et al.  Sulfonated polystyrene grafted polypropylene composite electrolyte membranes for direct methanol fuel cells , 2003 .

[8]  M. Torkkeli,et al.  The state of water and the nature of ion clusters in crosslinked proton conducting membranes of styrene grafted and sulfonated poly(vinylidene fluoride) , 2000 .

[9]  M. Nasef,et al.  Preparation of composite polymer electrolytes by electron beam-induced grafting : proton and lithium ion-conducting membranes , 2007 .

[10]  K. Scott,et al.  Grafted polymer electrolyte membrane for direct methanol fuel cells , 2005 .

[11]  Timothy J. Peckham,et al.  Structural and Morphological Features of Acid-Bearing Polymers for PEM Fuel Cells , 2008 .

[12]  D. Behar,et al.  Radiation‐induced grafting of sulfonates on polyethylene , 1982 .

[13]  B. Smitha,et al.  Solid polymer electrolyte membranes for fuel cell applications¿a review , 2005 .

[14]  T. Kallio,et al.  Water in different poly(styrene sulfonic acid)‐grafted fluoropolymers , 2002 .

[15]  Seung Woo Lee,et al.  RETRACTED: Synthesis of polypropylene fabric with sulfonate groups , 2008 .

[16]  Ashok Kumar,et al.  Preparation of strong acid cation-exchange membrane using radiation-induced graft polymerisation , 2005 .

[17]  B. Gupta,et al.  Radiation Grafted Membranes , 2008 .

[18]  Zhiqiang Hu,et al.  The effect of additives on radiation-induced grafting of AA and SSS onto HDPE , 2007 .

[19]  Keith Scott,et al.  Performance of the direct methanol fuel cell with radiation-grafted polymer membranes , 2000 .

[20]  Minghong G. Wu,et al.  Radiation‐induced grafting of acrylic acid and sodium styrene sulfonate onto high‐density polyethylene membranes. I. Effect of grafting conditions , 2006 .

[21]  R. Rohani,et al.  Effect of reaction conditions on electron induced graft copolymerization of styrene onto poly(ethylene-co-tetrafluoroethylene) films: Kinetics study , 2007 .

[22]  G. Sundholm,et al.  Water sorption and diffusion coefficients of protons and Water in PVDF-g-PSSA polymer electrolyte membranes , 1999 .

[23]  M. Nasef,et al.  Structure-property Relationships in Radiation Grafted Poly(tetrafluoroethylene)-graft-polystyrene Sulfonic Acid Membranes , 2005 .

[24]  B. Gupta,et al.  Development of radiation‐grafted FEP‐g‐polystyrene membranes: Some property–structure correlations , 1994 .

[25]  K. Sanui,et al.  Proton-conducting polymer electrolyte membranes based on hydrocarbon polymers , 2000 .

[26]  B. Améduri,et al.  Functional fluoropolymers for fuel cell membranes , 2005 .

[27]  Göran Sundholm,et al.  Phase separation and crystallinity in proton conducting membranes of styrene grafted and sulfonated poly(vinylidene fluoride) , 1999 .

[28]  Seung Woo Lee,et al.  Synthesis of a cation-exchange fabric with sulfonate groups by radiation-induced graft copolymerization from binary monomer mixtures , 2008 .

[29]  R. Zhou,et al.  Preparation of cation-exchange membrane containing bi-functional groups by radiation induced grafting of acrylic acid and sodium styrene sulfonate onto HDPE: Influence of the synthesis conditions , 2009 .

[30]  M. Nasef,et al.  Preparation and applications of ion exchange membranes by radiation-induced graft copolymerization of polar monomers onto non-polar films , 2004 .

[31]  B. Gupta,et al.  Proton Exchange Membranes by Radiation-Induced Graft Copolymerization of Monomers into Teflon-FEP Films , 1994, CHIMIA.

[32]  M. Nasef,et al.  Acid‐synergized grafting of sodium styrene sulfonate onto electron beam irradiated‐poly(vinylidene fluoride) films for preparation of fuel cell membrane , 2010 .

[33]  T. Kallio,et al.  Effect of the Initial Matrix Material on the Structure of Radiation-Grafted Ion-Exchange Membranes: Wide-angle and Small-Angle X-Ray Scattering Studies , 2002 .

[34]  P. Vie,et al.  Fuel cell performance of proton irradiated and subsequently sulfonated poly(vinyl fluoride) membranes , 2002 .