Thermal decomposition of poly(propylene sebacate) and poly(propylene azelate) biodegradable polyesters: Evaluation of mechanisms using TGA, FTIR and GC/MS
暂无分享,去创建一个
George Z. Papageorgiou | Dimitrios N. Bikiaris | Konstantinos M. Paraskevopoulos | Konstantinos Chrissafis | K. Chrissafis | K. Paraskevopoulos | D. Bikiaris | G. Papageorgiou
[1] M. Soccio,et al. Crystallization behavior and morphology of poly(propylene terephthalate) copolymers containing neopenthyl glycol moieties , 2008 .
[2] Giorgio Montaudo,et al. Thermal degradation of poly(ethylene terephthalate) at the processing temperature , 2004 .
[3] Y. Shih,et al. Thermal degradation behavior and kinetic analysis of biodegradable polymers using various comparative models, 1 poly(butylene succinate) , 2007 .
[4] S. Levchik,et al. A review on thermal decomposition and combustion of thermoplastic polyesters , 2004 .
[5] G. Botelho,et al. Studies on thermal and thermo-oxidative degradation of poly(ethylene terephthalate) and poly(butylene terephthalate) , 2001 .
[6] Y. Shih. Thermal degradation and kinetic analysis of biodegradable PBS/multiwalled carbon nanotube nanocomposites , 2009 .
[7] K. Chrissafis,et al. Investigation of thermal degradation mechanism of an aliphatic polyester using pyrolysis–gas chromatography–mass spectrometry and a kinetic study of the effect of the amount of polymerisation catalyst , 2007 .
[8] K. Chrissafis,et al. Thermal degradation kinetics and decomposition mechanism of two new aliphatic biodegradable polyesters poly(propylene glutarate) and poly(propylene suberate) , 2010 .
[9] Y. Tokiwa,et al. Biodegradability and Biodegradation of Polyesters , 2007 .
[10] Eleni Pavlidou,et al. Biodegradable aliphatic polyesters. Part I. Properties and biodegradation of poly(butylene succinate-co-butylene adipate) , 2006 .
[11] T. Ozawa,et al. Kinetic analysis of derivative curves in thermal analysis , 1970 .
[12] Katrin Mackenzie,et al. Thermal decomposition of biodegradable polyesters—II. Poly(lactic acid) , 1996 .
[13] P. N. Tutunjian,et al. Thermal stability of poly(trimethylene terephthalate) , 2005 .
[14] M. Gazzano,et al. Aliphatic poly(propylene dicarboxylate)s: Effect of chain length on thermal properties and crystallization kinetics , 2007 .
[15] Ammar Khawam,et al. Complementary use of model-free and modelistic methods in the analysis of solid-state kinetics. , 2005, The journal of physical chemistry. B.
[16] H. Abe,et al. Molecular mobility and crystalline phase structure of biodegradable poly[(R)-3-hydroxybutylic acid-co-(R)-3-hydroxyhexanoic acid] , 2004 .
[17] K. Chrissafis,et al. Effect of molecular weight on thermal degradation mechanism of the biodegradable polyester poly(ethylene succinate) , 2006 .
[18] S. Carroccio,et al. Thermo-oxidative processes in biodegradable poly(butylene succinate) , 2009 .
[19] N. Washburn,et al. Structure and mechanical properties of poly(?,?-lactic acid)/poly(ɛ-caprolactone) blends , 2003 .
[20] J. Opfermann,et al. Kinetic evaluation of exothermal reactions measured by DSC , 1991 .
[21] Nicolas Sbirrazzuoli,et al. Isoconversional Kinetic Analysis of Thermally Stimulated Processes in Polymers , 2006 .
[22] T. Ozawa. A New Method of Analyzing Thermogravimetric Data , 1965 .
[23] Y. Doi,et al. Thermal degradation of poly((R)-3-hydroxybutyrate), poly(e-caprolactone), and poly((S)-lactide) , 2002 .
[24] Joseph H. Flynn,et al. General Treatment of the Thermogravimetry of Polymers. , 1966, Journal of research of the National Bureau of Standards. Section A, Physics and chemistry.
[25] M. Vert,et al. In vitro and in vivo degradation of lactic acid-based interference screws used in cruciate ligament reconstruction. , 1999, International journal of biological macromolecules.
[26] Dimitrios N. Bikiaris,et al. Comparative study of the effect of different nanoparticles on the mechanical properties and thermal degradation mechanism of in situ prepared poly(ε-caprolactone) nanocomposites , 2007 .
[27] H. L. Friedman,et al. Kinetics of thermal degradation of char-forming plastics from thermogravimetry. Application to a phenolic plastic , 2007 .
[28] H. Gong,et al. Thermal Stabilities and the Thermal Degradation Kinetics of Poly(ϵ-Caprolactone) , 2008 .
[29] P. Dubois,et al. Mechanisms and Kinetics of Thermal Degradation of Poly(ε-caprolactone) , 2001 .
[30] Dimitrios N. Bikiaris,et al. Thermal degradation kinetics of the biodegradable aliphatic polyester, poly(propylene succinate) , 2006 .
[31] P. Rizzarelli,et al. Matrix-assisted laser desorption/ionization time-of-flight/time-of-flight tandem mass spectra of poly(butylene adipate). , 2006, Rapid communications in mass spectrometry : RCM.
[32] Dimitrios N. Bikiaris,et al. Thermal degradation mechanism of poly(ethylene succinate) and poly(butylene succinate) : Comparative study , 2005 .
[33] K. Chrissafis,et al. Synthesis, characterization and thermal degradation mechanism of three poly(alkylene adipate)s: Comparative study , 2007 .
[34] S. Vyazovkin. Model-free kinetics , 2006 .
[35] P. Sivasamy,et al. The role of β-hydrogen in the degradation of polyesters , 1992 .
[36] L. Katsikas,et al. The thermal degradation of poly(diethyl fumarate) , 2006 .
[37] Dimitrios J. Giliopoulos,et al. Correlation between chemical and solid-state structures and enzymatic hydrolysis in novel biodegradable polyesters. The case of poly(propylene alkanedicarboxylate)s. , 2008, Macromolecular bioscience.
[38] Sergey Vyazovkin,et al. Modification of the integral isoconversional method to account for variation in the activation energy , 2001, J. Comput. Chem..