An enzyme electrode for measurement of penicillin in fermentation broth: A step toward the application of enzyme electrodes in fermentation control

A penicillin sensitive enzyme electrode has been used to analyze the concentration of benzylpenicillin in fermentation broth. The electrode response time was in the region of 2 min and the response to penicillin concentration was linear within the range of 1 to 10mM. The buffering capacity of the medium influenced the sensitivity of the electrode. At low buffer capacity the sensitivity of the enzyme electrode to penicillin was very high, but then the sensitivity to small changes in buffer capacity was relatively large. At high buffer capacity the sensitivity to penicillin was reduced and the electrode became less dependent on changes to buffer capacity. Constant calibration curves were repeatedly obtained with the electrode when used for 2 hr daily in a fermentation medium over a six day period. Three methods devised to calibrate the electrode for use in fermentation media were investigated. Methods one and two, based on the relationship between electrode sensitivity and buffer capacity in phosphate buffer and in sterile media, gave rather high penicillin concentration values. The third method based on an internal standard was the most satisfactory.