Development of a flexible direct photosynthetic/metabolic biofuel cell for mobile use

We have developed a direct photosynthetic/metabolic biofuel cell (DPBFC) without a mediator, based on the extraction of electrons directly from bacteria using a polyaniline electrode. Since previous developments of this nature are rigid, they are not suitable for use on curved or soft surfaces. Our DPBFC has a flexible structure due to its flexible components: a membrane electrode assembly made of Nafion 117, a carbon cloth electrode made of modified polyaniline, a copper foil current collector, an anode chamber made from molded polydimethylsiloxane (PDMS), and a cathode chamber and cover cut from a PDMS membrane. Silicone bonds were used for assembling the individual parts. Our 50×50×3-mm flexible DPBFC has a stable electrical power output up to a bending angle of 170°. The maximum power density using purple photosynthetic bacteria (Rhodopesudomonas palustris) as a fuel source was 5.26μW/cm2 with an open-circuit voltage of 0.089 V.

[1]  Improving the performance of a direct photosynthetic/metabolic bio-fuel cell (DPBFC) using gene manipulated bacteria , 2007 .

[2]  H. Reichl,et al.  Development of a planar micro fuel cell with thin film and micro patterning technologies , 2004 .

[3]  A. Hiraishi,et al.  Horizontal transfer of genes coding for the photosynthetic reaction centers of purple bacteria , 1997, Journal of Molecular Evolution.

[4]  Christine E. Schmidt,et al.  Conducting polymers in biomedical engineering , 2007 .

[5]  Keisuke Morishima,et al.  Design principle and prototyping of a direct photosynthetic/metabolic biofuel cell (DPMFC) , 2006 .

[6]  En-Tang Kang,et al.  In-vivo tissue response to polyaniline , 1999 .

[7]  Mu Chiao,et al.  Micromachined microbial and photosynthetic fuel cells , 2006 .

[8]  Matsuhiko Nishizawa,et al.  Enzyme-based glucose fuel cell using Vitamin K3-immobilized polymer as an electron mediator , 2005 .

[9]  Jae Hyuk Jang,et al.  Micro-fuel cells—Current development and applications , 2007 .

[10]  Takeshi Ito,et al.  Characteristics of micro DMFCs array fabricated on flexible polymeric substrate , 2006 .

[11]  M. Madou,et al.  Microfabrication of Bilayer Polymer Actuator Valves for Controlled Drug Delivery , 2007 .

[13]  Sung-hoon Ahn,et al.  Fuel Cell End Plates , 2008 .

[14]  D. Gweon,et al.  Accurate measurement of the out-of-plane motion of a tip-scanning atomic force microscope , 2009 .

[15]  Kyung-Young Jhang,et al.  Nonlinear ultrasonic techniques for nondestructive assessment of micro damage in material: A review , 2009 .

[16]  K. Morishima,et al.  Evaluation of bacteria compatible microporous surfaces for biofuel cells , 2008 .

[17]  S. J. Kim,et al.  Silicon retinal tack for the epiretinal fixation of the polyimide electrode array , 2006 .

[18]  R. Morent,et al.  Progress in polymer science: Edited by A. D. Jenkins Pergamon Press, Oxford, 1971, 303 pp. £8.50 , 1972 .